diff --git a/Bindings/clock/actions,owl-cmu.txt b/Bindings/clock/actions,owl-cmu.txt
new file mode 100644
index 0000000..d19885b
--- /dev/null
+++ b/Bindings/clock/actions,owl-cmu.txt
@@ -0,0 +1,52 @@
+* Actions Semi Owl Clock Management Unit (CMU)
+
+The Actions Semi Owl Clock Management Unit generates and supplies clock
+to various controllers within the SoC. The clock binding described here is
+applicable to S900, S700 and S500 SoC's.
+
+Required Properties:
+
+- compatible: should be one of the following,
+	"actions,s900-cmu"
+	"actions,s700-cmu"
+	"actions,s500-cmu"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- clocks: Reference to the parent clocks ("hosc", "losc")
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier, and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in corresponding
+dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h or
+actions,s500-cmu.h header and can be used in device tree sources.
+
+External clocks:
+
+The hosc clock used as input for the plls is generated outside the SoC. It is
+expected that it is defined using standard clock bindings as "hosc".
+
+Actions Semi S900 CMU also requires one more clock:
+ - "losc" - internal low frequency oscillator
+
+Example: Clock Management Unit node:
+
+        cmu: clock-controller@e0160000 {
+                compatible = "actions,s900-cmu";
+                reg = <0x0 0xe0160000 0x0 0x1000>;
+                clocks = <&hosc>, <&losc>;
+                #clock-cells = <1>;
+                #reset-cells = <1>;
+        };
+
+Example: UART controller node that consumes clock generated by the clock
+management unit:
+
+        uart: serial@e012a000 {
+                compatible = "actions,s900-uart", "actions,owl-uart";
+                reg = <0x0 0xe012a000 0x0 0x2000>;
+                interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cmu CLK_UART5>;
+        };
diff --git a/Bindings/clock/adi,axi-clkgen.yaml b/Bindings/clock/adi,axi-clkgen.yaml
new file mode 100644
index 0000000..5e942bc
--- /dev/null
+++ b/Bindings/clock/adi,axi-clkgen.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/adi,axi-clkgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI clkgen pcore clock generator
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  The axi_clkgen IP core is a software programmable clock generator,
+  that can be synthesized on various FPGA platforms.
+
+  Link: https://wiki.analog.com/resources/fpga/docs/axi_clkgen
+
+properties:
+  compatible:
+    enum:
+      - adi,axi-clkgen-2.00.a
+      - adi,zynqmp-axi-clkgen-2.00.a
+
+  clocks:
+    description:
+      Specifies the reference clock(s) from which the output frequency is
+      derived. This must either reference one clock if only the first clock
+      input is connected or two if both clock inputs are connected.
+    minItems: 1
+    maxItems: 2
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@ff000000 {
+      compatible = "adi,axi-clkgen-2.00.a";
+      #clock-cells = <0>;
+      reg = <0xff000000 0x1000>;
+      clocks = <&osc 1>;
+    };
diff --git a/Bindings/clock/airoha,en7523-scu.yaml b/Bindings/clock/airoha,en7523-scu.yaml
new file mode 100644
index 0000000..79b0752
--- /dev/null
+++ b/Bindings/clock/airoha,en7523-scu.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/airoha,en7523-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EN7523 Clock
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <nbd@nbd.name>
+
+description: |
+  This node defines the System Control Unit of the EN7523 SoC,
+  a collection of registers configuring many different aspects of the SoC.
+
+  The clock driver uses it to read and configure settings of the
+  PLL controller, which provides clocks for the CPU, the bus and
+  other SoC internal peripherals.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify which clock they consume.
+
+  All these identifiers can be found in:
+  [1]: <include/dt-bindings/clock/en7523-clk.h>.
+
+  The clocks are provided inside a system controller node.
+
+properties:
+  compatible:
+    items:
+      - const: airoha,en7523-scu
+
+  reg:
+    maxItems: 2
+
+  "#clock-cells":
+    description:
+      The first cell indicates the clock number, see [1] for available
+      clocks.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/en7523-clk.h>
+    scu: system-controller@1fa20000 {
+      compatible = "airoha,en7523-scu";
+      reg = <0x1fa20000 0x400>,
+            <0x1fb00000 0x1000>;
+      #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
new file mode 100644
index 0000000..93587b7
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ahb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 AHB Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-ahb-clk
+      - allwinner,sun6i-a31-ahb1-clk
+      - allwinner,sun8i-h3-ahb2-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun4i-a10-ahb-clk
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-ahb1-clk
+
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun8i-h3-ahb2-clk
+
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+
+examples:
+  - |
+    ahb@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-ahb-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&axi>;
+        clock-output-names = "ahb";
+    };
+
+  - |
+    ahb1@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun6i-a31-ahb1-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+        clock-output-names = "ahb1";
+    };
+
+  - |
+    ahb2_clk@1c2005c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun8i-h3-ahb2-clk";
+        reg = <0x01c2005c 0x4>;
+        clocks = <&ahb1>, <&pll6d2>;
+        clock-output-names = "ahb2";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
new file mode 100644
index 0000000..e14e1aa
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb0-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 APB0 Bus Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-apb0-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    apb0@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-apb0-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&ahb>;
+        clock-output-names = "apb0";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
new file mode 100644
index 0000000..8a4747e
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 APB1 Bus Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-apb1-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20058 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-apb1-clk";
+        reg = <0x01c20058 0x4>;
+        clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+        clock-output-names = "apb1";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-axi-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
new file mode 100644
index 0000000..aa08dd4
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-axi-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 AXI Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-axi-clk
+      - allwinner,sun8i-a23-axi-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    axi@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-axi-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&cpu>;
+        clock-output-names = "axi";
+    };
+
+  - |
+    axi_clk@1c20050 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun8i-a23-axi-clk";
+        reg = <0x01c20050 0x4>;
+        clocks = <&cpu>;
+        clock-output-names = "axi";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Bindings/clock/allwinner,sun4i-a10-ccu.yaml
new file mode 100644
index 0000000..1690b9d
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-ccu.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ccu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner Clock Control Unit
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-ccu
+      - allwinner,sun5i-a10s-ccu
+      - allwinner,sun5i-a13-ccu
+      - allwinner,sun6i-a31-ccu
+      - allwinner,sun7i-a20-ccu
+      - allwinner,sun8i-a23-ccu
+      - allwinner,sun8i-a33-ccu
+      - allwinner,sun8i-a83t-ccu
+      - allwinner,sun8i-a83t-r-ccu
+      - allwinner,sun8i-h3-ccu
+      - allwinner,sun8i-h3-r-ccu
+      - allwinner,sun8i-r40-ccu
+      - allwinner,sun8i-v3-ccu
+      - allwinner,sun8i-v3s-ccu
+      - allwinner,sun9i-a80-ccu
+      - allwinner,sun20i-d1-ccu
+      - allwinner,sun20i-d1-r-ccu
+      - allwinner,sun50i-a64-ccu
+      - allwinner,sun50i-a64-r-ccu
+      - allwinner,sun50i-a100-ccu
+      - allwinner,sun50i-a100-r-ccu
+      - allwinner,sun50i-h5-ccu
+      - allwinner,sun50i-h6-ccu
+      - allwinner,sun50i-h6-r-ccu
+      - allwinner,sun50i-h616-ccu
+      - allwinner,sun50i-h616-r-ccu
+      - allwinner,suniv-f1c100s-ccu
+      - nextthing,gr8-ccu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: High Frequency Oscillator (usually at 24MHz)
+      - description: Low Frequency Oscillator (usually at 32kHz)
+      - description: Internal Oscillator
+      - description: Peripherals PLL
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: hosc
+      - const: losc
+      - const: iosc
+      - const: pll-periph
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      enum:
+        - allwinner,sun8i-a83t-r-ccu
+        - allwinner,sun8i-h3-r-ccu
+        - allwinner,sun20i-d1-r-ccu
+        - allwinner,sun50i-a64-r-ccu
+        - allwinner,sun50i-a100-r-ccu
+        - allwinner,sun50i-h6-r-ccu
+        - allwinner,sun50i-h616-r-ccu
+
+then:
+  properties:
+    clocks:
+      minItems: 4
+      maxItems: 4
+
+    clock-names:
+      minItems: 4
+      maxItems: 4
+
+else:
+  if:
+    properties:
+      compatible:
+        enum:
+          - allwinner,sun20i-d1-ccu
+          - allwinner,sun50i-a100-ccu
+          - allwinner,sun50i-h6-ccu
+          - allwinner,sun50i-h616-ccu
+
+  then:
+    properties:
+      clocks:
+        minItems: 3
+        maxItems: 3
+
+      clock-names:
+        minItems: 3
+        maxItems: 3
+
+  else:
+    properties:
+      clocks:
+        minItems: 2
+        maxItems: 2
+
+      clock-names:
+        minItems: 2
+        maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    ccu: clock@1c20000 {
+        compatible = "allwinner,sun8i-h3-ccu";
+        reg = <0x01c20000 0x400>;
+        clocks = <&osc24M>, <&osc32k>;
+        clock-names = "hosc", "losc";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+  - |
+    r_ccu: clock@1f01400 {
+        compatible = "allwinner,sun50i-a64-r-ccu";
+        reg = <0x01f01400 0x100>;
+        clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu 11>;
+        clock-names = "hosc", "losc", "iosc", "pll-periph";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
new file mode 100644
index 0000000..08d0735
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-cpu-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 CPU Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-cpu-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    cpu@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-cpu-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+        clock-output-names = "cpu";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-display-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-display-clk.yaml
new file mode 100644
index 0000000..e665e50
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-display-clk.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-display-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Display Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  "#reset-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-display-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20104 {
+        #clock-cells = <0>;
+        #reset-cells = <0>;
+        compatible = "allwinner,sun4i-a10-display-clk";
+        reg = <0x01c20104 0x4>;
+        clocks = <&pll3>, <&pll7>, <&pll5 1>;
+        clock-output-names = "de-be";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
new file mode 100644
index 0000000..c4714d0
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-gates-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Bus Gates Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      This additional argument passed to that clock is the offset of
+      the bit controlling this particular gate in the register.
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-gates-clk
+      - const: allwinner,sun4i-a10-axi-gates-clk
+      - const: allwinner,sun4i-a10-ahb-gates-clk
+      - const: allwinner,sun5i-a10s-ahb-gates-clk
+      - const: allwinner,sun5i-a13-ahb-gates-clk
+      - const: allwinner,sun7i-a20-ahb-gates-clk
+      - const: allwinner,sun6i-a31-ahb1-gates-clk
+      - const: allwinner,sun8i-a23-ahb1-gates-clk
+      - const: allwinner,sun9i-a80-ahb0-gates-clk
+      - const: allwinner,sun9i-a80-ahb1-gates-clk
+      - const: allwinner,sun9i-a80-ahb2-gates-clk
+      - const: allwinner,sun4i-a10-apb0-gates-clk
+      - const: allwinner,sun5i-a10s-apb0-gates-clk
+      - const: allwinner,sun5i-a13-apb0-gates-clk
+      - const: allwinner,sun7i-a20-apb0-gates-clk
+      - const: allwinner,sun9i-a80-apb0-gates-clk
+      - const: allwinner,sun8i-a83t-apb0-gates-clk
+      - const: allwinner,sun4i-a10-apb1-gates-clk
+      - const: allwinner,sun5i-a13-apb1-gates-clk
+      - const: allwinner,sun5i-a10s-apb1-gates-clk
+      - const: allwinner,sun6i-a31-apb1-gates-clk
+      - const: allwinner,sun7i-a20-apb1-gates-clk
+      - const: allwinner,sun8i-a23-apb1-gates-clk
+      - const: allwinner,sun9i-a80-apb1-gates-clk
+      - const: allwinner,sun6i-a31-apb2-gates-clk
+      - const: allwinner,sun8i-a23-apb2-gates-clk
+      - const: allwinner,sun8i-a83t-bus-gates-clk
+      - const: allwinner,sun9i-a80-apbs-gates-clk
+      - const: allwinner,sun4i-a10-dram-gates-clk
+
+      - items:
+          - const: allwinner,sun5i-a13-dram-gates-clk
+          - const: allwinner,sun4i-a10-gates-clk
+
+      - items:
+          - const: allwinner,sun8i-h3-apb0-gates-clk
+          - const: allwinner,sun4i-a10-gates-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-indices:
+    minItems: 1
+    maxItems: 64
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 64
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-indices
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c2005c {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-axi-gates-clk";
+        reg = <0x01c2005c 0x4>;
+        clocks = <&axi>;
+        clock-indices = <0>;
+        clock-output-names = "axi_dram";
+    };
+
+  - |
+    clk@1c20060 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-ahb-gates-clk";
+        reg = <0x01c20060 0x8>;
+        clocks = <&ahb>;
+        clock-indices = <0>, <1>,
+                        <2>, <3>,
+                        <4>, <5>, <6>,
+                        <7>, <8>, <9>,
+                        <10>, <11>, <12>,
+                        <13>, <14>, <16>,
+                        <17>, <18>, <20>,
+                        <21>, <22>, <23>,
+                        <24>, <25>, <26>,
+                        <32>, <33>, <34>,
+                        <35>, <36>, <37>,
+                        <40>, <41>, <43>,
+                        <44>, <45>,
+                        <46>, <47>,
+                        <50>, <52>;
+        clock-output-names = "ahb_usb0", "ahb_ehci0",
+                             "ahb_ohci0", "ahb_ehci1",
+                             "ahb_ohci1", "ahb_ss", "ahb_dma",
+                             "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+                             "ahb_mmc2", "ahb_mmc3", "ahb_ms",
+                             "ahb_nand", "ahb_sdram", "ahb_ace",
+                             "ahb_emac", "ahb_ts", "ahb_spi0",
+                             "ahb_spi1", "ahb_spi2", "ahb_spi3",
+                             "ahb_pata", "ahb_sata", "ahb_gps",
+                             "ahb_ve", "ahb_tvd", "ahb_tve0",
+                             "ahb_tve1", "ahb_lcd0", "ahb_lcd1",
+                             "ahb_csi0", "ahb_csi1", "ahb_hdmi",
+                             "ahb_de_be0", "ahb_de_be1",
+                             "ahb_de_fe0", "ahb_de_fe1",
+                             "ahb_mp", "ahb_mali400";
+    };
+
+
+  - |
+    clk@1c20068 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-apb0-gates-clk";
+        reg = <0x01c20068 0x4>;
+        clocks = <&apb0>;
+        clock-indices = <0>, <1>,
+                        <2>, <3>,
+                        <5>, <6>,
+                        <7>, <10>;
+        clock-output-names = "apb0_codec", "apb0_spdif",
+                             "apb0_ac97", "apb0_iis",
+                             "apb0_pio", "apb0_ir0",
+                             "apb0_ir1", "apb0_keypad";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
new file mode 100644
index 0000000..e824e33
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mbus-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 MBUS Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun5i-a13-mbus-clk
+      - allwinner,sun8i-a23-mbus-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c2015c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun5i-a13-mbus-clk";
+        reg = <0x01c2015c 0x4>;
+        clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+        clock-output-names = "mbus";
+    };
+
+  - |
+    clk@1c2015c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun8i-a23-mbus-clk";
+        reg = <0x01c2015c 0x4>;
+        clocks = <&osc24M>, <&pll6 1>, <&pll5>;
+        clock-output-names = "mbus";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
new file mode 100644
index 0000000..c612f94
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mmc-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Module 1 Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      There is three different outputs: the main clock, with the ID 0,
+      and the output and sample clocks, with the IDs 1 and 2,
+      respectively.
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-mmc-clk
+      - allwinner,sun9i-a80-mmc-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 3
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun4i-a10-mmc-clk
+
+then:
+  properties:
+    clocks:
+      maxItems: 3
+
+else:
+  properties:
+    clocks:
+      maxItems: 2
+
+examples:
+  - |
+    clk@1c20088 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-mmc-clk";
+        reg = <0x01c20088 0x4>;
+        clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+        clock-output-names = "mmc0",
+                             "mmc0_output",
+                             "mmc0_sample";
+    };
+
+  - |
+    clk@6000410 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun9i-a80-mmc-clk";
+        reg = <0x06000410 0x4>;
+        clocks = <&osc24M>, <&pll4>;
+        clock-output-names = "mmc0", "mmc0_output",
+                             "mmc0_sample";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
new file mode 100644
index 0000000..80ae3a7
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod0-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Module 0 Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun4i-a10-mod0-clk
+          - allwinner,sun9i-a80-mod0-clk
+
+  # The PRCM on the A31 and A23 will have the reg property missing,
+  # since it's set at the upper level node, and will be validated by
+  # PRCM's schema. Make sure we only validate standalone nodes.
+  required:
+    - compatible
+    - reg
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-mod0-clk
+      - allwinner,sun9i-a80-mod0-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    # On the A80, the PRCM mod0 clocks have 2 parents.
+    minItems: 2
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20080 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-mod0-clk";
+        reg = <0x01c20080 0x4>;
+        clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+        clock-output-names = "nand";
+    };
+
+  - |
+    clk@8001454 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-mod0-clk";
+        reg = <0x08001454 0x4>;
+        clocks = <&osc32k>, <&osc24M>;
+        clock-output-names = "r_ir";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
new file mode 100644
index 0000000..4f9a8d4
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Module 1 Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-mod1-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun4i-a10-pll2.h>
+
+    clk@1c200c0 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-mod1-clk";
+        reg = <0x01c200c0 0x4>;
+        clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+                 <&pll2 SUN4I_A10_PLL2_4X>,
+                 <&pll2 SUN4I_A10_PLL2_2X>,
+                 <&pll2 SUN4I_A10_PLL2_1X>;
+        clock-output-names = "spdif";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
new file mode 100644
index 0000000..0052bf1
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-osc-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Gateable Oscillator Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-osc-clk
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    description: >
+      Frequency of the main oscillator.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clock-frequency
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    osc24M: clk@1c20050 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-osc-clk";
+        reg = <0x01c20050 0x4>;
+        clock-frequency = <24000000>;
+        clock-output-names = "osc24M";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
new file mode 100644
index 0000000..b13a1f2
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 CPU PLL
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-pll1-clk
+      - allwinner,sun6i-a31-pll1-clk
+      - allwinner,sun8i-a23-pll1-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20000 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-pll1-clk";
+        reg = <0x01c20000 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "osc24M";
+    };
+
+  - |
+    clk@1c20000 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun6i-a31-pll1-clk";
+        reg = <0x01c20000 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll1";
+    };
+
+  - |
+    clk@1c20000 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun8i-a23-pll1-clk";
+        reg = <0x01c20000 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll1";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
new file mode 100644
index 0000000..418d207
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll3-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Video PLL
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-pll3-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20010 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-pll3-clk";
+        reg = <0x01c20010 0x4>;
+        clocks = <&osc3M>;
+        clock-output-names = "pll3";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
new file mode 100644
index 0000000..76ef3f0
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll5-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 DRAM PLL
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The first output is the DRAM clock output, the second is meant
+      for peripherals on the SoC.
+
+  compatible:
+    const: allwinner,sun4i-a10-pll5-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 2
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20020 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-pll5-clk";
+        reg = <0x01c20020 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll5_ddr", "pll5_other";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
new file mode 100644
index 0000000..a94c93c
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll6-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Peripheral PLL
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The first output is the SATA clock output, the second is the
+      regular PLL output, the third is a PLL output at twice the rate.
+
+  compatible:
+    const: allwinner,sun4i-a10-pll6-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 3
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20028 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-pll6-clk";
+        reg = <0x01c20028 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll6_sata", "pll6_other", "pll6";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
new file mode 100644
index 0000000..6646b2a
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 TCON Channel 0 Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-tcon-ch0-clk
+      - allwinner,sun4i-a10-tcon-ch1-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun4i-a10-tcon-ch0-clk
+
+then:
+  required:
+    - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20118 {
+        #clock-cells = <0>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+        reg = <0x01c20118 0x4>;
+        clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+        clock-output-names = "tcon-ch0-sclk";
+    };
+
+  - |
+    clk@1c2012c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+        reg = <0x01c2012c 0x4>;
+        clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+        clock-output-names = "tcon-ch1-sclk";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-usb-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
new file mode 100644
index 0000000..5103b67
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-usb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 USB Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The additional ID argument passed to the clock shall refer to
+      the index of the output.
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-usb-clk
+      - allwinner,sun5i-a13-usb-clk
+      - allwinner,sun6i-a31-usb-clk
+      - allwinner,sun8i-a23-usb-clk
+      - allwinner,sun8i-h3-usb-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    minItems: 2
+    maxItems: 8
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun4i-a10-usb-clk
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun5i-a13-usb-clk
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-usb-clk
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun8i-a23-usb-clk
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun8i-h3-usb-clk
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 8
+
+examples:
+  - |
+    clk@1c200cc {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun4i-a10-usb-clk";
+        reg = <0x01c200cc 0x4>;
+        clocks = <&pll6 1>;
+        clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+    };
+
+  - |
+    clk@1c200cc {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun5i-a13-usb-clk";
+        reg = <0x01c200cc 0x4>;
+        clocks = <&pll6 1>;
+        clock-output-names = "usb_ohci0", "usb_phy";
+    };
+
+  - |
+    clk@1c200cc {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun6i-a31-usb-clk";
+        reg = <0x01c200cc 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
+                             "usb_ohci0", "usb_ohci1",
+                             "usb_ohci2";
+    };
+
+  - |
+    clk@1c200cc {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun8i-a23-usb-clk";
+        reg = <0x01c200cc 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic",
+                             "usb_hsic_12M", "usb_ohci0";
+    };
+
+  - |
+    clk@1c200cc {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun8i-h3-usb-clk";
+        reg = <0x01c200cc 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "usb_phy0", "usb_phy1",
+                             "usb_phy2", "usb_phy3",
+                             "usb_ohci0", "usb_ohci1",
+                             "usb_ohci2", "usb_ohci3";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun4i-a10-ve-clk.yaml b/Bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
new file mode 100644
index 0000000..80337e3
--- /dev/null
+++ b/Bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ve-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Video Engine Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  "#reset-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-ve-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c2013c {
+        #clock-cells = <0>;
+        #reset-cells = <0>;
+        compatible = "allwinner,sun4i-a10-ve-clk";
+        reg = <0x01c2013c 0x4>;
+        clocks = <&pll4>;
+        clock-output-names = "ve";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml b/Bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
new file mode 100644
index 0000000..c6a6fbb
--- /dev/null
+++ b/Bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun5i-a13-ahb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A13 AHB Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun5i-a13-ahb-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    ahb@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun5i-a13-ahb-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&axi>, <&cpu>, <&pll6 1>;
+        clock-output-names = "ahb";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml b/Bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
new file mode 100644
index 0000000..7d6a6a3
--- /dev/null
+++ b/Bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun6i-a31-pll6-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 Peripheral PLL
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The first output is the regular PLL output, the second is a PLL
+      output at twice the rate.
+
+  compatible:
+    const: allwinner,sun6i-a31-pll6-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 2
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20028 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun6i-a31-pll6-clk";
+        reg = <0x01c20028 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll6", "pll6x2";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml b/Bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
new file mode 100644
index 0000000..b6202de
--- /dev/null
+++ b/Bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-gmac-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A20 GMAC TX Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun7i-a20-gmac-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+    description: >
+      The parent clocks shall be fixed rate dummy clocks at 25 MHz and
+      125 MHz, respectively.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20164 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun7i-a20-gmac-clk";
+        reg = <0x01c20164 0x4>;
+        clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+        clock-output-names = "gmac_tx";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun7i-a20-out-clk.yaml b/Bindings/clock/allwinner,sun7i-a20-out-clk.yaml
new file mode 100644
index 0000000..fde7f7d
--- /dev/null
+++ b/Bindings/clock/allwinner,sun7i-a20-out-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-out-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A20 Output Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun7i-a20-out-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c201f0 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun7i-a20-out-clk";
+        reg = <0x01c201f0 0x4>;
+        clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
+        clock-output-names = "clk_out_a";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml b/Bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
new file mode 100644
index 0000000..70369bd
--- /dev/null
+++ b/Bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun8i-a83t-de2-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t Display Engine 2/3 Clock Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun8i-a83t-de2-clk
+      - const: allwinner,sun8i-h3-de2-clk
+      - const: allwinner,sun8i-v3s-de2-clk
+      - const: allwinner,sun50i-a64-de2-clk
+      - const: allwinner,sun50i-h5-de2-clk
+      - const: allwinner,sun50i-h6-de3-clk
+      - items:
+          - const: allwinner,sun8i-r40-de2-clk
+          - const: allwinner,sun8i-h3-de2-clk
+      - items:
+          - const: allwinner,sun20i-d1-de2-clk
+          - const: allwinner,sun50i-h5-de2-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-h3-ccu.h>
+    #include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+    de2_clocks: clock@1000000 {
+        compatible = "allwinner,sun8i-h3-de2-clk";
+        reg = <0x01000000 0x100000>;
+        clocks = <&ccu CLK_BUS_DE>,
+                 <&ccu CLK_DE>;
+        clock-names = "bus",
+                      "mod";
+        resets = <&ccu RST_BUS_DE>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml b/Bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
new file mode 100644
index 0000000..45b9e2c
--- /dev/null
+++ b/Bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun8i-h3-bus-gates-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Bus Gates Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      This additional argument passed to that clock is the offset of
+      the bit controlling this particular gate in the register.
+
+  compatible:
+    const: allwinner,sun8i-h3-bus-gates-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-indices:
+    minItems: 1
+    maxItems: 64
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 64
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-indices
+  - clock-names
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20060 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun8i-h3-bus-gates-clk";
+        reg = <0x01c20060 0x14>;
+        clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
+        clock-names = "ahb1", "ahb2", "apb1", "apb2";
+        clock-indices = <5>, <6>, <8>,
+                        <9>, <10>, <13>,
+                        <14>, <17>, <18>,
+                        <19>, <20>,
+                        <21>, <23>,
+                        <24>, <25>,
+                        <26>, <27>,
+                        <28>, <29>,
+                        <30>, <31>, <32>,
+                        <35>, <36>, <37>,
+                        <40>, <41>, <43>,
+                        <44>, <52>, <53>,
+                        <54>, <64>,
+                        <65>, <69>, <72>,
+                        <76>, <77>, <78>,
+                        <96>, <97>, <98>,
+                        <112>, <113>,
+                        <114>, <115>,
+                        <116>, <128>, <135>;
+        clock-output-names = "bus_ce", "bus_dma", "bus_mmc0",
+                             "bus_mmc1", "bus_mmc2", "bus_nand",
+                             "bus_sdram", "bus_gmac", "bus_ts",
+                             "bus_hstimer", "bus_spi0",
+                             "bus_spi1", "bus_otg",
+                             "bus_otg_ehci0", "bus_ehci1",
+                             "bus_ehci2", "bus_ehci3",
+                             "bus_otg_ohci0", "bus_ohci1",
+                             "bus_ohci2", "bus_ohci3", "bus_ve",
+                             "bus_lcd0", "bus_lcd1", "bus_deint",
+                             "bus_csi", "bus_tve", "bus_hdmi",
+                             "bus_de", "bus_gpu", "bus_msgbox",
+                             "bus_spinlock", "bus_codec",
+                             "bus_spdif", "bus_pio", "bus_ths",
+                             "bus_i2s0", "bus_i2s1", "bus_i2s2",
+                             "bus_i2c0", "bus_i2c1", "bus_i2c2",
+                             "bus_uart0", "bus_uart1",
+                             "bus_uart2", "bus_uart3",
+                             "bus_scr", "bus_ephy", "bus_dbg";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml b/Bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
new file mode 100644
index 0000000..f0f65af
--- /dev/null
+++ b/Bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-ahb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 AHB Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun9i-a80-ahb-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@6000060 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun9i-a80-ahb-clk";
+        reg = <0x06000060 0x4>;
+        clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>;
+        clock-output-names = "ahb0";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml b/Bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
new file mode 100644
index 0000000..e9f9bc8
--- /dev/null
+++ b/Bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-apb0-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 APB0 Bus Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun9i-a80-apb0-clk
+      - allwinner,sun9i-a80-apb1-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@6000070 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun9i-a80-apb0-clk";
+        reg = <0x06000070 0x4>;
+        clocks = <&osc24M>, <&pll4>;
+        clock-output-names = "apb0";
+    };
+
+  - |
+    clk@6000074 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun9i-a80-apb1-clk";
+        reg = <0x06000074 0x4>;
+        clocks = <&osc24M>, <&pll4>;
+        clock-output-names = "apb1";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml b/Bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
new file mode 100644
index 0000000..c48db2d
--- /dev/null
+++ b/Bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-cpus-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 CPUS Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun9i-a80-cpus-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@8001410 {
+        compatible = "allwinner,sun9i-a80-cpus-clk";
+        reg = <0x08001410 0x4>;
+        #clock-cells = <0>;
+        clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
+        clock-output-names = "cpus";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun9i-a80-de-clks.yaml b/Bindings/clock/allwinner,sun9i-a80-de-clks.yaml
new file mode 100644
index 0000000..e9f81a3
--- /dev/null
+++ b/Bindings/clock/allwinner,sun9i-a80-de-clks.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-de-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 Display Engine Clock Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-de-clks
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: RAM Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: mod
+      - const: dram
+      - const: bus
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun9i-a80-ccu.h>
+    #include <dt-bindings/reset/sun9i-a80-ccu.h>
+
+    de_clocks: clock@3000000 {
+        compatible = "allwinner,sun9i-a80-de-clks";
+        reg = <0x03000000 0x30>;
+        clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>;
+        clock-names = "mod", "dram", "bus";
+        resets = <&ccu RST_BUS_DE>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun9i-a80-gt-clk.yaml b/Bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
new file mode 100644
index 0000000..d3ce5eb
--- /dev/null
+++ b/Bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-gt-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 GT Bus Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun9i-a80-gt-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@600005c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun9i-a80-gt-clk";
+        reg = <0x0600005c 0x4>;
+        clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
+        clock-output-names = "gt";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml b/Bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
new file mode 100644
index 0000000..65ee5af
--- /dev/null
+++ b/Bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-mmc-config-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 MMC Configuration Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+description: >
+  There is one clock/reset output per mmc controller. The number of
+  outputs is determined by the size of the address block, which is
+  related to the overall mmc block.
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The additional ID argument passed to the clock shall refer to
+      the index of the output.
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-mmc-config-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 4
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c13000 {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun9i-a80-mmc-config-clk";
+        reg = <0x01c13000 0x10>;
+        clocks = <&ahb0_gates 8>;
+        resets = <&ahb0_resets 8>;
+        clock-output-names = "mmc0_config", "mmc1_config",
+                             "mmc2_config", "mmc3_config";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml b/Bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
new file mode 100644
index 0000000..261264a
--- /dev/null
+++ b/Bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-pll4-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 Peripheral PLL
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun9i-a80-pll4-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@600000c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun9i-a80-pll4-clk";
+        reg = <0x0600000c 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll4";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun9i-a80-usb-clks.yaml b/Bindings/clock/allwinner,sun9i-a80-usb-clks.yaml
new file mode 100644
index 0000000..515c15d
--- /dev/null
+++ b/Bindings/clock/allwinner,sun9i-a80-usb-clks.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB Clock Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-usb-clks
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: High Frequency Oscillator
+
+  clock-names:
+    items:
+      - const: bus
+      - const: hosc
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun9i-a80-ccu.h>
+
+    usb_clocks: clock@a08000 {
+        compatible = "allwinner,sun9i-a80-usb-clks";
+        reg = <0x00a08000 0x8>;
+        clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+        clock-names = "bus", "hosc";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml b/Bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
new file mode 100644
index 0000000..3f7b8d9
--- /dev/null
+++ b/Bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-mod-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB Module Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The additional ID argument passed to the clock shall refer to
+      the index of the output.
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-usb-mod-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 6
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@a08000 {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun9i-a80-usb-mod-clk";
+        reg = <0x00a08000 0x4>;
+        clocks = <&ahb1_gates 1>;
+        clock-output-names = "usb0_ahb", "usb_ohci0",
+                             "usb1_ahb", "usb_ohci1",
+                             "usb2_ahb", "usb_ohci2";
+    };
+
+...
diff --git a/Bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml b/Bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
new file mode 100644
index 0000000..0d49072
--- /dev/null
+++ b/Bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-phy-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB PHY Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The additional ID argument passed to the clock shall refer to
+      the index of the output.
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-usb-phy-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 6
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@a08004 {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun9i-a80-usb-phy-clk";
+        reg = <0x00a08004 0x4>;
+        clocks = <&ahb1_gates 1>;
+        clock-output-names = "usb_phy0", "usb_hsic1_480M",
+                             "usb_phy1", "usb_hsic2_480M",
+                             "usb_phy2", "usb_hsic_12M";
+    };
+
+...
diff --git a/Bindings/clock/alphascale,acc.txt b/Bindings/clock/alphascale,acc.txt
new file mode 100644
index 0000000..c9fb932
--- /dev/null
+++ b/Bindings/clock/alphascale,acc.txt
@@ -0,0 +1,114 @@
+Alphascale Clock Controller
+
+The ACC (Alphascale Clock Controller) is responsible for choosing proper
+clock source, setting dividers and clock gates.
+
+Required properties for the ACC node:
+ - compatible: must be "alphascale,asm9260-clock-controller"
+ - reg: must contain the ACC register base and size
+ - #clock-cells : shall be set to 1.
+
+Simple one-cell clock specifier format is used, where the only cell is used
+as an index of the clock inside the provider.
+It is encouraged to use dt-binding for clock index definitions. SoC specific
+dt-binding should be included to the device tree descriptor. For example
+Alphascale ASM9260:
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+This binding contains two types of clock providers:
+ _AHB_ - AHB gate;
+ _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider.
+All clock specific details can be found in the SoC documentation.
+CLKID_AHB_ROM		0
+CLKID_AHB_RAM		1
+CLKID_AHB_GPIO		2
+CLKID_AHB_MAC		3
+CLKID_AHB_EMI		4
+CLKID_AHB_USB0		5
+CLKID_AHB_USB1		6
+CLKID_AHB_DMA0		7
+CLKID_AHB_DMA1		8
+CLKID_AHB_UART0		9
+CLKID_AHB_UART1		10
+CLKID_AHB_UART2		11
+CLKID_AHB_UART3		12
+CLKID_AHB_UART4		13
+CLKID_AHB_UART5		14
+CLKID_AHB_UART6		15
+CLKID_AHB_UART7		16
+CLKID_AHB_UART8		17
+CLKID_AHB_UART9		18
+CLKID_AHB_I2S0		19
+CLKID_AHB_I2C0		20
+CLKID_AHB_I2C1		21
+CLKID_AHB_SSP0		22
+CLKID_AHB_IOCONFIG	23
+CLKID_AHB_WDT		24
+CLKID_AHB_CAN0		25
+CLKID_AHB_CAN1		26
+CLKID_AHB_MPWM		27
+CLKID_AHB_SPI0		28
+CLKID_AHB_SPI1		29
+CLKID_AHB_QEI		30
+CLKID_AHB_QUADSPI0	31
+CLKID_AHB_CAMIF		32
+CLKID_AHB_LCDIF		33
+CLKID_AHB_TIMER0	34
+CLKID_AHB_TIMER1	35
+CLKID_AHB_TIMER2	36
+CLKID_AHB_TIMER3	37
+CLKID_AHB_IRQ		38
+CLKID_AHB_RTC		39
+CLKID_AHB_NAND		40
+CLKID_AHB_ADC0		41
+CLKID_AHB_LED		42
+CLKID_AHB_DAC0		43
+CLKID_AHB_LCD		44
+CLKID_AHB_I2S1		45
+CLKID_AHB_MAC1		46
+
+CLKID_SYS_CPU		47
+CLKID_SYS_AHB		48
+CLKID_SYS_I2S0M		49
+CLKID_SYS_I2S0S		50
+CLKID_SYS_I2S1M		51
+CLKID_SYS_I2S1S		52
+CLKID_SYS_UART0		53
+CLKID_SYS_UART1		54
+CLKID_SYS_UART2		55
+CLKID_SYS_UART3		56
+CLKID_SYS_UART4		56
+CLKID_SYS_UART5		57
+CLKID_SYS_UART6		58
+CLKID_SYS_UART7		59
+CLKID_SYS_UART8		60
+CLKID_SYS_UART9		61
+CLKID_SYS_SPI0		62
+CLKID_SYS_SPI1		63
+CLKID_SYS_QUADSPI	64
+CLKID_SYS_SSP0		65
+CLKID_SYS_NAND		66
+CLKID_SYS_TRACE		67
+CLKID_SYS_CAMM		68
+CLKID_SYS_WDT		69
+CLKID_SYS_CLKOUT	70
+CLKID_SYS_MAC		71
+CLKID_SYS_LCD		72
+CLKID_SYS_ADCANA	73
+
+Example of clock consumer with _SYS_ and _AHB_ sinks.
+uart4: serial@80010000 {
+	compatible = "alphascale,asm9260-uart";
+	reg = <0x80010000 0x4000>;
+	clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
+	interrupts = <19>;
+};
+
+Clock consumer with only one, _AHB_ sink.
+timer0: timer@80088000 {
+	compatible = "alphascale,asm9260-timer";
+	reg = <0x80088000 0x4000>;
+	clocks = <&acc CLKID_AHB_TIMER0>;
+	interrupts = <29>;
+};
+
diff --git a/Bindings/clock/altr_socfpga.txt b/Bindings/clock/altr_socfpga.txt
new file mode 100644
index 0000000..f72e80e
--- /dev/null
+++ b/Bindings/clock/altr_socfpga.txt
@@ -0,0 +1,30 @@
+Device Tree Clock bindings for Altera's SoCFPGA platform
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"altr,socfpga-pll-clock" - for a PLL clock
+	"altr,socfpga-perip-clock" - The peripheral clock divided from the
+		PLL clock.
+	"altr,socfpga-gate-clk" - Clocks that directly feed peripherals and
+		can get gated.
+
+- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
+- clocks : shall be the input parent clock phandle for the clock. This is
+	either an oscillator or a pll output.
+- #clock-cells : from common clock binding, shall be set to 0.
+
+Optional properties:
+- fixed-divider : If clocks have a fixed divider value, use this property.
+- clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register
+        and the bit index.
+- div-reg : For "socfpga-gate-clk" and "socfpga-periph-clock", div-reg contains
+	the divider register, bit shift, and width.
+- clk-phase : For the sdmmc_clk, contains the value of the clock phase that controls
+	the SDMMC CIU clock. The first value is the clk_sample(smpsel), and the second
+	value is the cclk_in_drv(drvsel). The clk-phase is used to enable the correct
+	hold/delay times that is needed for the SD/MMC CIU clock. The values of both
+	can be 0-315 degrees, in 45 degree increments.
diff --git a/Bindings/clock/amlogic,a1-peripherals-clkc.yaml b/Bindings/clock/amlogic,a1-peripherals-clkc.yaml
new file mode 100644
index 0000000..6d84cee
--- /dev/null
+++ b/Bindings/clock/amlogic,a1-peripherals-clkc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,a1-peripherals-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic A1 Peripherals Clock Control Unit
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Jerome Brunet <jbrunet@baylibre.com>
+  - Jian Hu <jian.hu@jian.hu.com>
+  - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+properties:
+  compatible:
+    const: amlogic,a1-peripherals-clkc
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: input fixed pll div2
+      - description: input fixed pll div3
+      - description: input fixed pll div5
+      - description: input fixed pll div7
+      - description: input hifi pll
+      - description: input oscillator (usually at 24MHz)
+
+  clock-names:
+    items:
+      - const: fclk_div2
+      - const: fclk_div3
+      - const: fclk_div5
+      - const: fclk_div7
+      - const: hifi_pll
+      - const: xtal
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
+    apb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@800 {
+            compatible = "amlogic,a1-peripherals-clkc";
+            reg = <0 0x800 0 0x104>;
+            #clock-cells = <1>;
+            clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+                     <&clkc_pll CLKID_FCLK_DIV3>,
+                     <&clkc_pll CLKID_FCLK_DIV5>,
+                     <&clkc_pll CLKID_FCLK_DIV7>,
+                     <&clkc_pll CLKID_HIFI_PLL>,
+                     <&xtal>;
+            clock-names = "fclk_div2", "fclk_div3",
+                          "fclk_div5", "fclk_div7",
+                          "hifi_pll", "xtal";
+        };
+    };
diff --git a/Bindings/clock/amlogic,a1-pll-clkc.yaml b/Bindings/clock/amlogic,a1-pll-clkc.yaml
new file mode 100644
index 0000000..a59b188
--- /dev/null
+++ b/Bindings/clock/amlogic,a1-pll-clkc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic A1 PLL Clock Control Unit
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Jerome Brunet <jbrunet@baylibre.com>
+  - Jian Hu <jian.hu@jian.hu.com>
+  - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+properties:
+  compatible:
+    const: amlogic,a1-pll-clkc
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: input fixpll_in
+      - description: input hifipll_in
+
+  clock-names:
+    items:
+      - const: fixpll_in
+      - const: hifipll_in
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
+    apb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@7c80 {
+            compatible = "amlogic,a1-pll-clkc";
+            reg = <0 0x7c80 0 0x18c>;
+            #clock-cells = <1>;
+            clocks = <&clkc_periphs CLKID_FIXPLL_IN>,
+                     <&clkc_periphs CLKID_HIFIPLL_IN>;
+            clock-names = "fixpll_in", "hifipll_in";
+        };
+    };
diff --git a/Bindings/clock/amlogic,axg-audio-clkc.txt b/Bindings/clock/amlogic,axg-audio-clkc.txt
new file mode 100644
index 0000000..3a8948c
--- /dev/null
+++ b/Bindings/clock/amlogic,axg-audio-clkc.txt
@@ -0,0 +1,59 @@
+* Amlogic AXG Audio Clock Controllers
+
+The Amlogic AXG audio clock controller generates and supplies clock to the
+other elements of the audio subsystem, such as fifos, i2s, spdif and pdm
+devices.
+
+Required Properties:
+
+- compatible	: should be "amlogic,axg-audio-clkc" for the A113X and A113D,
+		  "amlogic,g12a-audio-clkc" for G12A,
+		  "amlogic,sm1-audio-clkc" for S905X3.
+- reg		: physical base address of the clock controller and length of
+		  memory mapped region.
+- clocks	: a list of phandle + clock-specifier pairs for the clocks listed
+		  in clock-names.
+- clock-names	: must contain the following:
+		  * "pclk" - Main peripheral bus clock
+		  may contain the following:
+		  * "mst_in[0-7]" - 8 input plls to generate clock signals
+		  * "slv_sclk[0-9]" - 10 slave bit clocks provided by external
+				      components.
+		  * "slv_lrclk[0-9]" - 10 slave sample clocks provided by external
+				       components.
+- resets	: phandle of the internal reset line
+- #clock-cells	: should be 1.
+- #reset-cells  : should be 1 on the g12a (and following) soc family
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/axg-audio-clkc.h header and can be
+used in device tree sources.
+
+Example:
+
+clkc_audio: clock-controller@0 {
+	compatible = "amlogic,axg-audio-clkc";
+	reg = <0x0 0x0 0x0 0xb4>;
+	#clock-cells = <1>;
+
+	clocks = <&clkc CLKID_AUDIO>,
+		 <&clkc CLKID_MPLL0>,
+		 <&clkc CLKID_MPLL1>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_MPLL3>,
+		 <&clkc CLKID_HIFI_PLL>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_GP0_PLL>;
+	clock-names = "pclk",
+		      "mst_in0",
+		      "mst_in1",
+		      "mst_in2",
+		      "mst_in3",
+		      "mst_in4",
+		      "mst_in5",
+		      "mst_in6",
+		      "mst_in7";
+	resets = <&reset RESET_AUDIO>;
+};
diff --git a/Bindings/clock/amlogic,gxbb-aoclkc.yaml b/Bindings/clock/amlogic,gxbb-aoclkc.yaml
new file mode 100644
index 0000000..628e5dd
--- /dev/null
+++ b/Bindings/clock/amlogic,gxbb-aoclkc.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,gxbb-aoclkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Always-On Clock Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson-gxbb-aoclkc
+              - amlogic,meson-gxl-aoclkc
+              - amlogic,meson-gxm-aoclkc
+              - amlogic,meson-axg-aoclkc
+          - const: amlogic,meson-gx-aoclkc
+      - enum:
+          - amlogic,meson-axg-aoclkc
+          - amlogic,meson-g12a-aoclkc
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: xtal
+      - const: mpeg-clk
+      - const: ext-32k-0
+      - const: ext-32k-1
+      - const: ext-32k-2
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-g12a-aoclkc
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+
+        clock-names:
+          minItems: 2
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gxl-aoclkc
+            - amlogic,meson-gxm-aoclkc
+            - amlogic,meson-axg-aoclkc
+
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+
+        clock-names:
+          maxItems: 2
+
+additionalProperties: false
diff --git a/Bindings/clock/amlogic,gxbb-clkc.yaml b/Bindings/clock/amlogic,gxbb-clkc.yaml
new file mode 100644
index 0000000..63246f1
--- /dev/null
+++ b/Bindings/clock/amlogic,gxbb-clkc.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,gxbb-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Clock Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,gxbb-clkc
+      - amlogic,gxl-clkc
+      - amlogic,axg-clkc
+      - amlogic,g12a-clkc
+      - amlogic,g12b-clkc
+      - amlogic,sm1-clkc
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xtal
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
diff --git a/Bindings/clock/amlogic,meson8-ddr-clkc.yaml b/Bindings/clock/amlogic,meson8-ddr-clkc.yaml
new file mode 100644
index 0000000..d98d95d
--- /dev/null
+++ b/Bindings/clock/amlogic,meson8-ddr-clkc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,meson8-ddr-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic DDR Clock Controller
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson8-ddr-clkc
+      - amlogic,meson8b-ddr-clkc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: xtal
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    ddr_clkc: clock-controller@400 {
+      compatible = "amlogic,meson8-ddr-clkc";
+      reg = <0x400 0x20>;
+      clocks = <&xtal>;
+      clock-names = "xtal";
+      #clock-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/amlogic,meson8b-clkc.txt b/Bindings/clock/amlogic,meson8b-clkc.txt
new file mode 100644
index 0000000..cc51e47
--- /dev/null
+++ b/Bindings/clock/amlogic,meson8b-clkc.txt
@@ -0,0 +1,51 @@
+* Amlogic Meson8, Meson8b and Meson8m2 Clock and Reset Unit
+
+The Amlogic Meson8 / Meson8b / Meson8m2 clock controller generates and
+supplies clock to various controllers within the SoC.
+
+Required Properties:
+
+- compatible: must be one of:
+	- "amlogic,meson8-clkc" for Meson8 (S802) SoCs
+	- "amlogic,meson8b-clkc" for Meson8 (S805) SoCs
+	- "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+- clocks: list of clock phandles, one for each entry in clock-names
+- clock-names: should contain the following:
+  * "xtal": the 24MHz system oscillator
+  * "ddr_pll": the DDR PLL clock
+  * "clk_32k": (if present) the 32kHz clock signal from GPIOAO_6 (CLK_32K_IN)
+
+Parent node should have the following properties :
+- compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon"
+- reg: base address and size of the HHI system control register space.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be
+used in device tree sources.
+
+Similarly a preprocessor macro for each reset line is defined in
+dt-bindings/reset/amlogic,meson8b-clkc-reset.h (which can be used from the
+device tree sources).
+
+
+Example: Clock controller node:
+
+	clkc: clock-controller {
+		compatible = "amlogic,meson8b-clkc";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart_AO: serial@c81004c0 {
+		compatible = "amlogic,meson-uart";
+		reg = <0xc81004c0 0x14>;
+		interrupts = <0 90 1>;
+		clocks = <&clkc CLKID_CLK81>;
+	};
diff --git a/Bindings/clock/amlogic,s4-peripherals-clkc.yaml b/Bindings/clock/amlogic,s4-peripherals-clkc.yaml
new file mode 100644
index 0000000..c229e4f
--- /dev/null
+++ b/Bindings/clock/amlogic,s4-peripherals-clkc.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,s4-peripherals-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic S4 Peripherals Clock Controller
+
+maintainers:
+  - Yu Tu <yu.tu@amlogic.com>
+
+properties:
+  compatible:
+    const: amlogic,s4-peripherals-clkc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 14
+    items:
+      - description: input fixed pll div2
+      - description: input fixed pll div2p5
+      - description: input fixed pll div3
+      - description: input fixed pll div4
+      - description: input fixed pll div5
+      - description: input fixed pll div7
+      - description: input hifi pll
+      - description: input gp0 pll
+      - description: input mpll0
+      - description: input mpll1
+      - description: input mpll2
+      - description: input mpll3
+      - description: input hdmi pll
+      - description: input oscillator (usually at 24MHz)
+      - description: input external 32kHz reference (optional)
+
+  clock-names:
+    minItems: 14
+    items:
+      - const: fclk_div2
+      - const: fclk_div2p5
+      - const: fclk_div3
+      - const: fclk_div4
+      - const: fclk_div5
+      - const: fclk_div7
+      - const: hifi_pll
+      - const: gp0_pll
+      - const: mpll0
+      - const: mpll1
+      - const: mpll2
+      - const: mpll3
+      - const: hdmi_pll
+      - const: xtal
+      - const: ext_32k
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
+
+    clkc_periphs: clock-controller@fe000000 {
+      compatible = "amlogic,s4-peripherals-clkc";
+      reg = <0xfe000000 0x49c>;
+      clocks = <&clkc_pll 3>,
+              <&clkc_pll 13>,
+              <&clkc_pll 5>,
+              <&clkc_pll 7>,
+              <&clkc_pll 9>,
+              <&clkc_pll 11>,
+              <&clkc_pll 17>,
+              <&clkc_pll 15>,
+              <&clkc_pll 25>,
+              <&clkc_pll 27>,
+              <&clkc_pll 29>,
+              <&clkc_pll 31>,
+              <&clkc_pll 20>,
+              <&xtal>;
+      clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", "fclk_div4",
+                    "fclk_div5", "fclk_div7", "hifi_pll", "gp0_pll",
+                    "mpll0", "mpll1", "mpll2", "mpll3", "hdmi_pll", "xtal";
+      #clock-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/amlogic,s4-pll-clkc.yaml b/Bindings/clock/amlogic,s4-pll-clkc.yaml
new file mode 100644
index 0000000..d8932ec
--- /dev/null
+++ b/Bindings/clock/amlogic,s4-pll-clkc.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic S4 PLL Clock Controller
+
+maintainers:
+  - Yu Tu <yu.tu@amlogic.com>
+
+properties:
+  compatible:
+    const: amlogic,s4-pll-clkc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: xtal
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clkc_pll: clock-controller@fe008000 {
+      compatible = "amlogic,s4-pll-clkc";
+      reg = <0xfe008000 0x1e8>;
+      clocks = <&xtal>;
+      clock-names = "xtal";
+      #clock-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/apple,nco.yaml b/Bindings/clock/apple,nco.yaml
new file mode 100644
index 0000000..8b8411d
--- /dev/null
+++ b/Bindings/clock/apple,nco.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/apple,nco.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoCs' NCO block
+
+maintainers:
+  - Martin Povišer <povik+lin@cutebit.org>
+
+description: |
+  The NCO (Numerically Controlled Oscillator) block found on Apple SoCs
+  such as the t8103 (M1) is a programmable clock generator performing
+  fractional division of a high frequency input clock.
+
+  It carries a number of independent channels and is typically used for
+  generation of audio bitclocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t6000-nco
+          - apple,t8103-nco
+          - apple,t8112-nco
+      - const: apple,nco
+
+  clocks:
+    description:
+      Specifies the reference clock from which the output clocks
+      are derived through fractional division.
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    nco_clkref: clock-ref {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <900000000>;
+      clock-output-names = "nco-ref";
+    };
+
+    nco: clock-controller@23b044000 {
+      compatible = "apple,t8103-nco", "apple,nco";
+      reg = <0x3b044000 0x14000>;
+      #clock-cells = <1>;
+      clocks = <&nco_clkref>;
+    };
diff --git a/Bindings/clock/arm,syscon-icst.yaml b/Bindings/clock/arm,syscon-icst.yaml
new file mode 100644
index 0000000..b5533f8
--- /dev/null
+++ b/Bindings/clock/arm,syscon-icst.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/arm,syscon-icst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM System Controller ICST Clocks
+
+maintainers:
+  - Linus Walleij <linusw@kernel.org>
+
+description: |
+  The ICS525 and ICS307 oscillators are produced by Integrated
+  Devices Technology (IDT). ARM integrated these oscillators deeply into their
+  reference designs by adding special control registers that manage such
+  oscillators to their system controllers.
+
+  The various ARM system controllers contain logic to serialize and initialize
+  an ICST clock request after a write to the 32 bit register at an offset
+  into the system controller. Furthermore, to even be able to alter one of
+  these frequencies, the system controller must first be unlocked by
+  writing a special token to another offset in the system controller.
+
+  Some ARM hardware contain special versions of the serial interface that only
+  connects the low 8 bits of the VDW (missing one bit), hard-wires RDW to
+  different values and sometimes also hard-wires the output divider. They
+  therefore have special compatible strings as per this table (the OD value is
+  the value on the pins, not the resulting output divider).
+
+  In the core modules and logic tiles, the ICST is a configurable clock fed
+  from a 24 MHz clock on the motherboard (usually the main crystal) used for
+  generating e.g. video clocks. It is located on the core module and there is
+  only one of these. This clock node must be a subnode of the core module.
+
+  Hardware variant         RDW     OD          VDW
+
+  Integrator/AP            22      1           Bit 8 0, rest variable
+  integratorap-cm
+
+  Integrator/AP            46      3           Bit 8 0, rest variable
+  integratorap-sys
+
+  Integrator/AP            22 or   1           17 or (33 or 25 MHz)
+  integratorap-pci         14      1           14
+
+  Integrator/CP            22      variable    Bit 8 0, rest variable
+  integratorcp-cm-core
+
+  Integrator/CP            22      variable    Bit 8 0, rest variable
+  integratorcp-cm-mem
+
+  The ICST oscillator must be provided inside a system controller node.
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - arm,syscon-icst525
+      - arm,syscon-icst307
+      - arm,syscon-icst525-integratorap-cm
+      - arm,syscon-icst525-integratorap-sys
+      - arm,syscon-icst525-integratorap-pci
+      - arm,syscon-icst525-integratorcp-cm-core
+      - arm,syscon-icst525-integratorcp-cm-mem
+      - arm,integrator-cm-auxosc
+      - arm,versatile-cm-auxosc
+      - arm,impd1-vco1
+      - arm,impd1-vco2
+
+  reg:
+    maxItems: 1
+    description: The VCO register
+
+  clocks:
+    description: Parent clock for the ICST VCO
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+  lock-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset to the unlocking register for the oscillator
+
+  vco-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset to the VCO register for the oscillator
+    deprecated: true
+
+required:
+  - "#clock-cells"
+  - compatible
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    vco1: clock {
+      compatible = "arm,impd1-vco1";
+      #clock-cells = <0>;
+      lock-offset = <0x08>;
+      vco-offset = <0x00>;
+      clocks = <&sysclk>;
+      clock-output-names = "IM-PD1-VCO1";
+    };
+
+...
diff --git a/Bindings/clock/armada3700-periph-clock.txt b/Bindings/clock/armada3700-periph-clock.txt
new file mode 100644
index 0000000..fbf58c4
--- /dev/null
+++ b/Bindings/clock/armada3700-periph-clock.txt
@@ -0,0 +1,71 @@
+* Peripheral Clock bindings for Marvell Armada 37xx SoCs
+
+Marvell Armada 37xx SoCs provide peripheral clocks which are
+used as clock source for the peripheral of the SoC.
+
+There are two different blocks associated to north bridge and south
+bridge.
+
+The peripheral clock consumer should specify the desired clock by
+having the clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs for Armada 3700 North bridge clocks:
+ID	Clock name	Description
+-----------------------------------
+0	mmc		MMC controller
+1	sata_host	Sata Host
+2	sec_at		Security AT
+3	sac_dap		Security DAP
+4	tsecm		Security Engine
+5	setm_tmx	Serial Embedded Trace Module
+6	avs		Adaptive Voltage Scaling
+7	sqf		SPI
+8	pwm		PWM
+9	i2c_2		I2C 2
+10	i2c_1		I2C 1
+11	ddr_phy		DDR PHY
+12	ddr_fclk	DDR F clock
+13	trace		Trace
+14	counter		Counter
+15	eip97		EIP 97
+16	cpu		CPU
+
+The following is a list of provided IDs for Armada 3700 South bridge clocks:
+ID	Clock name	Description
+-----------------------------------
+0	gbe-50		50 MHz parent clock for Gigabit Ethernet
+1	gbe-core	parent clock for Gigabit Ethernet core
+2	gbe-125		125 MHz parent clock for Gigabit Ethernet
+3	gbe1-50		50 MHz clock for Gigabit Ethernet port 1
+4	gbe0-50		50 MHz clock for Gigabit Ethernet port 0
+5	gbe1-125	125 MHz clock for Gigabit Ethernet port 1
+6	gbe0-125	125 MHz clock for Gigabit Ethernet port 0
+7	gbe1-core	Gigabit Ethernet core port 1
+8	gbe0-core	Gigabit Ethernet core port 0
+9	gbe-bm		Gigabit Ethernet Buffer Manager
+10	sdio		SDIO
+11	usb32-sub2-sys	USB 2 clock
+12	usb32-ss-sys	USB 3 clock
+13	pcie		PCIe controller
+
+Required properties:
+
+- compatible : shall be "marvell,armada-3700-periph-clock-nb" for the
+  north bridge block, or
+  "marvell,armada-3700-periph-clock-sb" for the south bridge block
+- reg : must be the register address of North/South Bridge Clock register
+- #clock-cells : from common clock binding; shall be set to 1
+
+- clocks : list of the parent clock phandle in the following order:
+  TBG-A P, TBG-B P, TBG-A S, TBG-B S and finally the xtal clock.
+
+
+Example:
+
+nb_perih_clk: nb-periph-clk@13000{
+	compatible = "marvell,armada-3700-periph-clock-nb";
+	reg = <0x13000 0x1000>;
+	clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+	<&tbg 3>, <&xtalclk>;
+	#clock-cells = <1>;
+};
diff --git a/Bindings/clock/armada3700-tbg-clock.txt b/Bindings/clock/armada3700-tbg-clock.txt
new file mode 100644
index 0000000..ed1df32
--- /dev/null
+++ b/Bindings/clock/armada3700-tbg-clock.txt
@@ -0,0 +1,27 @@
+* Time Base Generator Clock bindings for Marvell Armada 37xx SoCs
+
+Marvell Armada 37xx SoCs provide Time Base Generator clocks which are
+used as parent clocks for the peripheral clocks.
+
+The TBG clock consumer should specify the desired clock by having the
+clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs and clock names on Armada 3700:
+ 0 = TBG A P
+ 1 = TBG B P
+ 2 = TBG A S
+ 3 = TBG B S
+
+Required properties:
+- compatible : shall be "marvell,armada-3700-tbg-clock"
+- reg : must be the register address of North Bridge PLL register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Example:
+
+tbg: tbg@13200 {
+	compatible = "marvell,armada-3700-tbg-clock";
+	reg = <0x13200 0x1000>;
+	clocks = <&xtalclk>;
+	#clock-cells = <1>;
+};
diff --git a/Bindings/clock/armada3700-xtal-clock.txt b/Bindings/clock/armada3700-xtal-clock.txt
new file mode 100644
index 0000000..4c0807f
--- /dev/null
+++ b/Bindings/clock/armada3700-xtal-clock.txt
@@ -0,0 +1,29 @@
+* Xtal Clock bindings for Marvell Armada 37xx SoCs
+
+Marvell Armada 37xx SoCs allow to determine the xtal clock frequencies by
+reading the gpio latch register.
+
+This node must be a subnode of the node exposing the register address
+of the GPIO block where the gpio latch is located.
+See Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,armada-3700-xtal-clock"
+- #clock-cells : from common clock binding; shall be set to 0
+
+Optional properties:
+- clock-output-names : from common clock binding; allows overwrite default clock
+	output names ("xtal")
+
+Example:
+pinctrl_nb: pinctrl-nb@13800 {
+	compatible = "armada3710-nb-pinctrl", "syscon", "simple-mfd";
+	reg = <0x13800 0x100>, <0x13C00 0x20>;
+
+	xtalclk: xtal-clk {
+		compatible = "marvell,armada-3700-xtal-clock";
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+};
diff --git a/Bindings/clock/artpec6.txt b/Bindings/clock/artpec6.txt
new file mode 100644
index 0000000..dff9cdf
--- /dev/null
+++ b/Bindings/clock/artpec6.txt
@@ -0,0 +1,41 @@
+* Clock bindings for Axis ARTPEC-6 chip
+
+The bindings are based on the clock provider binding in
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+External clocks:
+----------------
+
+There are two external inputs to the main clock controller which should be
+provided using the common clock bindings.
+- "sys_refclk": External 50 Mhz oscillator (required)
+- "i2s_refclk": Alternate audio reference clock (optional).
+
+Main clock controller
+---------------------
+
+Required properties:
+- #clock-cells: Should be <1>
+  See dt-bindings/clock/axis,artpec6-clkctrl.h for the list of valid identifiers.
+- compatible: Should be "axis,artpec6-clkctrl"
+- reg: Must contain the base address and length of the system controller
+- clocks:  Must contain a phandle entry for each clock in clock-names
+- clock-names: Must include the external oscillator ("sys_refclk"). Optional
+  ones are the audio reference clock ("i2s_refclk") and the audio fractional
+  dividers ("frac_clk0" and "frac_clk1").
+
+Examples:
+
+ext_clk: ext_clk {
+	#clock-cells = <0>;
+	compatible = "fixed-clock";
+	clock-frequency = <50000000>;
+};
+
+clkctrl: clkctrl@f8000000 {
+	#clock-cells = <1>;
+	compatible = "axis,artpec6-clkctrl";
+	reg = <0xf8000000 0x48>;
+	clocks = <&ext_clk>;
+	clock-names = "sys_refclk";
+};
diff --git a/Bindings/clock/atmel,at91rm9200-pmc.yaml b/Bindings/clock/atmel,at91rm9200-pmc.yaml
new file mode 100644
index 0000000..c1bdcd9
--- /dev/null
+++ b/Bindings/clock/atmel,at91rm9200-pmc.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/atmel,at91rm9200-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Power Management Controller (PMC)
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  The power management controller optimizes power consumption by controlling all
+  system and user peripheral clocks. The PMC enables/disables the clock inputs
+  to many of the peripherals and to the processor.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: atmel,at91sam9g20-pmc
+          - const: atmel,at91sam9260-pmc
+          - const: syscon
+      - items:
+          - enum:
+              - atmel,at91sam9g15-pmc
+              - atmel,at91sam9g25-pmc
+              - atmel,at91sam9g35-pmc
+              - atmel,at91sam9x25-pmc
+              - atmel,at91sam9x35-pmc
+          - const: atmel,at91sam9x5-pmc
+          - const: syscon
+      - items:
+          - enum:
+              - atmel,at91rm9200-pmc
+              - atmel,at91sam9260-pmc
+              - atmel,at91sam9g45-pmc
+              - atmel,at91sam9n12-pmc
+              - atmel,at91sam9rl-pmc
+              - atmel,at91sam9x5-pmc
+              - atmel,sama5d2-pmc
+              - atmel,sama5d3-pmc
+              - atmel,sama5d4-pmc
+              - microchip,sam9x60-pmc
+              - microchip,sama7g5-pmc
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#clock-cells":
+    description: |
+      - 1st cell is the clock type, one of PMC_TYPE_CORE, PMC_TYPE_SYSTEM,
+        PMC_TYPE_PERIPHERAL, PMC_TYPE_GCK, PMC_TYPE_PROGRAMMABLE (as defined
+        in <dt-bindings/clock/at91.h>)
+      - 2nd cell is the clock identifier as defined in <dt-bindings/clock/at91.h
+        (for core clocks) or as defined in datasheet (for system, peripheral,
+        gck and programmable clocks).
+    const: 2
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  atmel,osc-bypass:
+    description: set when a clock signal is directly provided on XIN
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,sam9x60-pmc
+              - microchip,sama7g5-pmc
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: td_slck
+            - const: md_slck
+            - const: main_xtal
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - atmel,at91rm9200-pmc
+              - atmel,at91sam9260-pmc
+              - atmel,at91sam9g20-pmc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: slow_xtal
+            - const: main_xtal
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - atmel,sama5d2-pmc
+              - atmel,sama5d3-pmc
+              - atmel,sama5d4-pmc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: slow_clk
+            - const: main_xtal
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmc: clock-controller@f0018000 {
+        compatible = "atmel,sama5d4-pmc", "syscon";
+        reg = <0xf0018000 0x120>;
+        interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+        #clock-cells = <2>;
+        clocks = <&clk32k>, <&main_xtal>;
+        clock-names = "slow_clk", "main_xtal";
+    };
+
+...
diff --git a/Bindings/clock/atmel,at91sam9x5-sckc.yaml b/Bindings/clock/atmel,at91sam9x5-sckc.yaml
new file mode 100644
index 0000000..7be2987
--- /dev/null
+++ b/Bindings/clock/atmel,at91sam9x5-sckc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/atmel,at91sam9x5-sckc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Slow Clock Controller (SCKC)
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - atmel,at91sam9x5-sckc
+          - atmel,sama5d3-sckc
+          - atmel,sama5d4-sckc
+          - microchip,sam9x60-sckc
+      - items:
+          - const: microchip,sama7g5-sckc
+          - const: microchip,sam9x60-sckc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    enum: [0, 1]
+
+  atmel,osc-bypass:
+    type: boolean
+    description: set when a clock signal is directly provided on XIN
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,sam9x60-sckc
+    then:
+      properties:
+        "#clock-cells":
+          const: 1
+    else:
+      properties:
+        "#clock-cells":
+          const: 0
+
+additionalProperties: false
+
+examples:
+  - |
+    clk32k: clock-controller@fffffe50 {
+        compatible = "microchip,sam9x60-sckc";
+        reg = <0xfffffe50 0x4>;
+        clocks = <&slow_xtal>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/axs10x-i2s-pll-clock.txt b/Bindings/clock/axs10x-i2s-pll-clock.txt
new file mode 100644
index 0000000..5ffc8df
--- /dev/null
+++ b/Bindings/clock/axs10x-i2s-pll-clock.txt
@@ -0,0 +1,25 @@
+Binding for the AXS10X I2S PLL clock
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: shall be "snps,axs10x-i2s-pll-clock"
+- reg : address and length of the I2S PLL register set.
+- clocks: shall be the input parent clock phandle for the PLL.
+- #clock-cells: from common clock binding; Should always be set to 0.
+
+Example:
+	pll_clock: pll_clock {
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+	};
+
+	i2s_clock@100a0 {
+		compatible = "snps,axs10x-i2s-pll-clock";
+		reg = <0x100a0 0x10>;
+		clocks = <&pll_clock>;
+		#clock-cells = <0>;
+	};
diff --git a/Bindings/clock/baikal,bt1-ccu-div.yaml b/Bindings/clock/baikal,bt1-ccu-div.yaml
new file mode 100644
index 0000000..bd4cefb
--- /dev/null
+++ b/Bindings/clock/baikal,bt1-ccu-div.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-div.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 Clock Control Unit Dividers
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  Clocks Control Unit is the core of Baikal-T1 SoC System Controller
+  responsible for the chip subsystems clocking and resetting. The CCU is
+  connected with an external fixed rate oscillator, which signal is transformed
+  into clocks of various frequencies and then propagated to either individual
+  IP-blocks or to groups of blocks (clock domains). The transformation is done
+  by means of an embedded into CCU PLLs and gateable/non-gateable dividers. The
+  later ones are described in this binding. Each clock domain can be also
+  individually reset by using the domain clocks divider configuration
+  registers. Baikal-T1 CCU is logically divided into the next components:
+  1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but
+     in general can provide any frequency supported by the CCU PLLs).
+  2) PLLs clocks generators (PLLs).
+  3) AXI-bus clock dividers (AXI) - described in this binding file.
+  4) System devices reference clock dividers (SYS) - described in this binding
+     file.
+  which are connected with each other as shown on the next figure:
+
+          +---------------+
+          | Baikal-T1 CCU |
+          |   +----+------|- MIPS P5600 cores
+          | +-|PLLs|------|- DDR controller
+          | | +----+      |
+  +----+  | |  |  |       |
+  |XTAL|--|-+  |  | +---+-|
+  +----+  | |  |  +-|AXI|-|- AXI-bus
+          | |  |    +---+-|
+          | |  |          |
+          | |  +----+---+-|- APB-bus
+          | +-------|SYS|-|- Low-speed Devices
+          |         +---+-|- High-speed Devices
+          +---------------+
+
+  Each sub-block is represented as a separate DT node and has an individual
+  driver to be bound with.
+
+  In order to create signals of wide range frequencies the external oscillator
+  output is primarily connected to a set of CCU PLLs. Some of PLLs CLKOUT are
+  then passed over CCU dividers to create signals required for the target clock
+  domain (like AXI-bus or System Device consumers). The dividers have the
+  following structure:
+
+          +--------------+
+  CLKIN --|->+----+ 1|\  |
+  SETCLK--|--|/DIV|->| | |
+  CLKDIV--|--|    |  | |-|->CLKLOUT
+  LOCK----|--+----+  | | |
+          |          |/  |
+          |           |  |
+  EN------|-----------+  |
+  RST-----|--------------|->RSTOUT
+          +--------------+
+
+  where CLKIN is the reference clock coming either from CCU PLLs or from an
+  external clock oscillator, SETCLK - a command to update the output clock in
+  accordance with a set divider, CLKDIV - clocks divider, LOCK - a signal of
+  the output clock stabilization, EN - enable/disable the divider block,
+  RST/RSTOUT - reset clocks domain signal. Depending on the consumer IP-core
+  peculiarities the dividers may lack of some functionality depicted on the
+  figure above (like EN, CLKDIV/LOCK/SETCLK). In this case the corresponding
+  clock provider just doesn't expose either switching functions, or the rate
+  configuration, or both of them.
+
+  The clock dividers, which output clock is then consumed by the SoC individual
+  devices, are united into a single clocks provider called System Devices CCU.
+  Similarly the dividers with output clocks utilized as AXI-bus reference clocks
+  are called AXI-bus CCU. Both of them use the common clock bindings with no
+  custom properties. The list of exported clocks and reset signals can be found
+  in the files: 'include/dt-bindings/clock/bt1-ccu.h' and
+  'include/dt-bindings/reset/bt1-ccu.h'. Since System Devices and AXI-bus CCU
+  are a part of the Baikal-T1 SoC System Controller their DT nodes are supposed
+  to be a children of later one.
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: baikal,bt1-ccu-axi
+
+then:
+  properties:
+    clocks:
+      items:
+        - description: CCU SATA PLL output clock
+        - description: CCU PCIe PLL output clock
+        - description: CCU Ethernet PLL output clock
+
+    clock-names:
+      items:
+        - const: sata_clk
+        - const: pcie_clk
+        - const: eth_clk
+
+else:
+  properties:
+    clocks:
+      items:
+        - description: External reference clock
+        - description: CCU SATA PLL output clock
+        - description: CCU PCIe PLL output clock
+        - description: CCU Ethernet PLL output clock
+
+    clock-names:
+      items:
+        - const: ref_clk
+        - const: sata_clk
+        - const: pcie_clk
+        - const: eth_clk
+
+properties:
+  compatible:
+    enum:
+      - baikal,bt1-ccu-axi
+      - baikal,bt1-ccu-sys
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks: true
+
+  clock-names: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+examples:
+  # AXI-bus Clock Control Unit node:
+  - |
+    #include <dt-bindings/clock/bt1-ccu.h>
+
+    clock-controller@1f04d030 {
+      compatible = "baikal,bt1-ccu-axi";
+      reg = <0x1f04d030 0x030>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+
+      clocks = <&ccu_pll CCU_SATA_PLL>,
+               <&ccu_pll CCU_PCIE_PLL>,
+               <&ccu_pll CCU_ETH_PLL>;
+      clock-names = "sata_clk", "pcie_clk", "eth_clk";
+    };
+  # System Devices Clock Control Unit node:
+  - |
+    #include <dt-bindings/clock/bt1-ccu.h>
+
+    clock-controller@1f04d060 {
+      compatible = "baikal,bt1-ccu-sys";
+      reg = <0x1f04d060 0x0a0>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+
+      clocks = <&clk25m>,
+               <&ccu_pll CCU_SATA_PLL>,
+               <&ccu_pll CCU_PCIE_PLL>,
+               <&ccu_pll CCU_ETH_PLL>;
+      clock-names = "ref_clk", "sata_clk", "pcie_clk",
+                    "eth_clk";
+    };
+  # Required Clock Control Unit PLL node:
+  - |
+    ccu_pll: clock-controller@1f04d000 {
+      compatible = "baikal,bt1-ccu-pll";
+      reg = <0x1f04d000 0x028>;
+      #clock-cells = <1>;
+
+      clocks = <&clk25m>;
+      clock-names = "ref_clk";
+    };
+...
diff --git a/Bindings/clock/baikal,bt1-ccu-pll.yaml b/Bindings/clock/baikal,bt1-ccu-pll.yaml
new file mode 100644
index 0000000..624984d
--- /dev/null
+++ b/Bindings/clock/baikal,bt1-ccu-pll.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 Clock Control Unit PLL
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  Clocks Control Unit is the core of Baikal-T1 SoC System Controller
+  responsible for the chip subsystems clocking and resetting. The CCU is
+  connected with an external fixed rate oscillator, which signal is transformed
+  into clocks of various frequencies and then propagated to either individual
+  IP-blocks or to groups of blocks (clock domains). The transformation is done
+  by means of PLLs and gateable/non-gateable dividers embedded into the CCU.
+  It's logically divided into the next components:
+  1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but
+     in general can provide any frequency supported by the CCU PLLs).
+  2) PLLs clocks generators (PLLs) - described in this binding file.
+  3) AXI-bus clock dividers (AXI).
+  4) System devices reference clock dividers (SYS).
+  which are connected with each other as shown on the next figure:
+
+          +---------------+
+          | Baikal-T1 CCU |
+          |   +----+------|- MIPS P5600 cores
+          | +-|PLLs|------|- DDR controller
+          | | +----+      |
+  +----+  | |  |  |       |
+  |XTAL|--|-+  |  | +---+-|
+  +----+  | |  |  +-|AXI|-|- AXI-bus
+          | |  |    +---+-|
+          | |  |          |
+          | |  +----+---+-|- APB-bus
+          | +-------|SYS|-|- Low-speed Devices
+          |         +---+-|- High-speed Devices
+          +---------------+
+
+  Each CCU sub-block is represented as a separate dts-node and has an
+  individual driver to be bound with.
+
+  In order to create signals of wide range frequencies the external oscillator
+  output is primarily connected to a set of CCU PLLs. There are five PLLs
+  to create a clock for the MIPS P5600 cores, the embedded DDR controller,
+  SATA, Ethernet and PCIe domains. The last three domains though named by the
+  biggest system interfaces in fact include nearly all of the rest SoC
+  peripherals. Each of the PLLs is based on True Circuits TSMC CLN28HPM core
+  with an interface wrapper (so called safe PLL' clocks switcher) to simplify
+  the PLL configuration procedure. The PLLs work as depicted on the next
+  diagram:
+
+      +--------------------------+
+      |                          |
+      +-->+---+    +---+   +---+ |  +---+   0|\
+  CLKF--->|/NF|--->|PFD|...|VCO|-+->|/OD|--->| |
+          +---+ +->+---+   +---+ /->+---+    | |--->CLKOUT
+  CLKOD---------C----------------+          1| |
+       +--------C--------------------------->|/
+       |        |                             ^
+  Rclk-+->+---+ |                             |
+  CLKR--->|/NR|-+                             |
+          +---+                               |
+  BYPASS--------------------------------------+
+  BWADJ--->
+
+  where Rclk is the reference clock coming  from XTAL, NR - reference clock
+  divider, NF - PLL clock multiplier, OD - VCO output clock divider, CLKOUT -
+  output clock, BWADJ is the PLL bandwidth adjustment parameter. At this moment
+  the binding supports the PLL dividers configuration in accordance with a
+  requested rate, while bypassing and bandwidth adjustment settings can be
+  added in future if it gets to be necessary.
+
+  The PLLs CLKOUT is then either directly connected with the corresponding
+  clocks consumer (like P5600 cores or DDR controller) or passed over a CCU
+  divider to create a signal required for the clock domain.
+
+  The CCU PLL dts-node uses the common clock bindings with no custom
+  parameters. The list of exported clocks can be found in
+  'include/dt-bindings/clock/bt1-ccu.h'. Since CCU PLL is a part of the
+  Baikal-T1 SoC System Controller its DT node is supposed to be a child of
+  later one.
+
+properties:
+  compatible:
+    const: baikal,bt1-ccu-pll
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    description: External reference clock
+    maxItems: 1
+
+  clock-names:
+    const: ref_clk
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+examples:
+  # Clock Control Unit PLL node:
+  - |
+    clock-controller@1f04d000 {
+      compatible = "baikal,bt1-ccu-pll";
+      reg = <0x1f04d000 0x028>;
+      #clock-cells = <1>;
+
+      clocks = <&clk25m>;
+      clock-names = "ref_clk";
+    };
+  # Required external oscillator:
+  - |
+    clk25m: clock-oscillator-25m {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency  = <25000000>;
+      clock-output-names = "clk25m";
+    };
+...
diff --git a/Bindings/clock/bitmain,bm1880-clk.yaml b/Bindings/clock/bitmain,bm1880-clk.yaml
new file mode 100644
index 0000000..f0f9392
--- /dev/null
+++ b/Bindings/clock/bitmain,bm1880-clk.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/bitmain,bm1880-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bitmain BM1880 Clock Controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+  The Bitmain BM1880 clock controller generates and supplies clock to
+  various peripherals within the SoC.
+
+  This binding uses common clock bindings
+  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+properties:
+  compatible:
+    const: bitmain,bm1880-clk
+
+  reg:
+    items:
+      - description: pll registers
+      - description: system registers
+
+  reg-names:
+    items:
+      - const: pll
+      - const: sys
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: osc
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock controller node:
+  - |
+    clk: clock-controller@e8 {
+        compatible = "bitmain,bm1880-clk";
+        reg = <0xe8 0x0c>, <0x800 0xb0>;
+        reg-names = "pll", "sys";
+        clocks = <&osc>;
+        clock-names = "osc";
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/brcm,bcm2711-dvp.yaml b/Bindings/clock/brcm,bcm2711-dvp.yaml
new file mode 100644
index 0000000..2d40df2
--- /dev/null
+++ b/Bindings/clock/brcm,bcm2711-dvp.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm2711-dvp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2711 HDMI DVP
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: brcm,brcm2711-dvp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    dvp: clock@7ef00000 {
+        compatible = "brcm,brcm2711-dvp";
+        reg = <0x7ef00000 0x10>;
+        clocks = <&clk_108MHz>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/brcm,bcm2835-aux-clock.txt b/Bindings/clock/brcm,bcm2835-aux-clock.txt
new file mode 100644
index 0000000..4acfc8f
--- /dev/null
+++ b/Bindings/clock/brcm,bcm2835-aux-clock.txt
@@ -0,0 +1,31 @@
+Broadcom BCM2835 auxiliary peripheral support
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The auxiliary peripherals (UART, SPI1, and SPI2) have a small register
+area controlling clock gating to the peripherals, and providing an IRQ
+status register.
+
+Required properties:
+- compatible:	Should be "brcm,bcm2835-aux"
+- #clock-cells:	Should be <1>. The permitted clock-specifier values can be
+		  found in include/dt-bindings/clock/bcm2835-aux.h
+- reg:		Specifies base physical address and size of the registers
+- clocks:	The parent clock phandle
+
+Example:
+
+	clocks: cprman@7e101000 {
+		compatible = "brcm,bcm2835-cprman";
+		#clock-cells = <1>;
+		reg = <0x7e101000 0x2000>;
+		clocks = <&clk_osc>;
+	};
+
+	aux: aux@7e215004 {
+		compatible = "brcm,bcm2835-aux";
+		#clock-cells = <1>;
+		reg = <0x7e215000 0x8>;
+		clocks = <&clocks BCM2835_CLOCK_VPU>;
+	};
diff --git a/Bindings/clock/brcm,bcm2835-cprman.txt b/Bindings/clock/brcm,bcm2835-cprman.txt
new file mode 100644
index 0000000..9e0b03a
--- /dev/null
+++ b/Bindings/clock/brcm,bcm2835-cprman.txt
@@ -0,0 +1,60 @@
+Broadcom BCM2835 CPRMAN clocks
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CPRMAN clock controller generates clocks in the audio power domain
+of the BCM2835.  There is a level of PLLs deriving from an external
+oscillator, a level of PLL dividers that produce channels off of the
+few PLLs, and a level of mostly-generic clock generators sourcing from
+the PLL channels.  Most other hardware components source from the
+clock generators, but a few (like the ARM or HDMI) will source from
+the PLL dividers directly.
+
+Required properties:
+- compatible:	should be one of the following,
+	"brcm,bcm2711-cprman"
+	"brcm,bcm2835-cprman"
+- #clock-cells:	Should be <1>. The permitted clock-specifier values can be
+		  found in include/dt-bindings/clock/bcm2835.h
+- reg:		Specifies base physical address and size of the registers
+- clocks:	phandles to the parent clocks used as input to the module, in
+		  the following order:
+
+		  - External oscillator
+		  - DSI0 byte clock
+		  - DSI0 DDR2 clock
+		  - DSI0 DDR clock
+		  - DSI1 byte clock
+		  - DSI1 DDR2 clock
+		  - DSI1 DDR clock
+
+		  Only external oscillator is required.  The DSI clocks may
+		  not be present, in which case their children will be
+		  unusable.
+
+Example:
+
+	clk_osc: clock@3 {
+		compatible = "fixed-clock";
+		reg = <3>;
+		#clock-cells = <0>;
+		clock-output-names = "osc";
+		clock-frequency = <19200000>;
+	};
+
+	clocks: cprman@7e101000 {
+		compatible = "brcm,bcm2835-cprman";
+		#clock-cells = <1>;
+		reg = <0x7e101000 0x2000>;
+		clocks = <&clk_osc>;
+	};
+
+	i2c0: i2c@7e205000 {
+		compatible = "brcm,bcm2835-i2c";
+		reg = <0x7e205000 0x1000>;
+		interrupts = <2 21>;
+		clocks = <&clocks BCM2835_CLOCK_VPU>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
diff --git a/Bindings/clock/brcm,bcm53573-ilp.txt b/Bindings/clock/brcm,bcm53573-ilp.txt
new file mode 100644
index 0000000..2ebb107
--- /dev/null
+++ b/Bindings/clock/brcm,bcm53573-ilp.txt
@@ -0,0 +1,36 @@
+Broadcom BCM53573 ILP clock
+===========================
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+This binding is used for ILP clock (sometimes referred as "slow clock")
+on Broadcom BCM53573 devices using Cortex-A7 CPU.
+
+ILP's rate has to be calculated on runtime and it depends on ALP clock
+which has to be referenced.
+
+This clock is part of PMU (Power Management Unit), a Broadcom's device
+handing power-related aspects. Its node must be sub-node of the PMU
+device.
+
+Required properties:
+- compatible: "brcm,bcm53573-ilp"
+- clocks: has to reference an ALP clock
+- #clock-cells: should be <0>
+- clock-output-names: from common clock bindings, should contain clock
+		      name
+
+Example:
+
+pmu@18012000 {
+	compatible = "simple-mfd", "syscon";
+	reg = <0x18012000 0x00001000>;
+
+	ilp {
+		compatible = "brcm,bcm53573-ilp";
+		clocks = <&alp>;
+		#clock-cells = <0>;
+		clock-output-names = "ilp";
+	};
+};
diff --git a/Bindings/clock/brcm,bcm63268-timer-clocks.yaml b/Bindings/clock/brcm,bcm63268-timer-clocks.yaml
new file mode 100644
index 0000000..cd0d763
--- /dev/null
+++ b/Bindings/clock/brcm,bcm63268-timer-clocks.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm63268-timer-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM63268 Timer Clock and Reset
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm63268-timer-clocks
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    timer_clk: clock-controller@100000ac {
+      compatible = "brcm,bcm63268-timer-clocks";
+      reg = <0x100000ac 0x4>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/brcm,bcm63xx-clocks.txt b/Bindings/clock/brcm,bcm63xx-clocks.txt
new file mode 100644
index 0000000..3e7ca55
--- /dev/null
+++ b/Bindings/clock/brcm,bcm63xx-clocks.txt
@@ -0,0 +1,24 @@
+Gated Clock Controller Bindings for MIPS based BCM63XX SoCs
+
+Required properties:
+- compatible: must be one of:
+	 "brcm,bcm3368-clocks"
+	 "brcm,bcm6318-clocks"
+	 "brcm,bcm6318-ubus-clocks"
+	 "brcm,bcm6328-clocks"
+	 "brcm,bcm6358-clocks"
+	 "brcm,bcm6362-clocks"
+	 "brcm,bcm6368-clocks"
+	 "brcm,bcm63268-clocks"
+
+- reg: Address and length of the register set
+- #clock-cells: must be <1>
+
+
+Example:
+
+clkctl: clock-controller@10000004 {
+	compatible = "brcm,bcm6328-clocks";
+	reg = <0x10000004 0x4>;
+	#clock-cells = <1>;
+};
diff --git a/Bindings/clock/brcm,iproc-clocks.yaml b/Bindings/clock/brcm,iproc-clocks.yaml
new file mode 100644
index 0000000..5ad147d
--- /dev/null
+++ b/Bindings/clock/brcm,iproc-clocks.yaml
@@ -0,0 +1,417 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,iproc-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc Family Clocks
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+description: |
+  The iProc clock controller manages clocks that are common to the iProc family.
+  An SoC from the iProc family may have several PLLs, e.g., ARMPLL, GENPLL,
+  LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL
+  comprises of several leaf clocks
+
+  ASIU clocks are a special case. These clocks are derived directly from the
+  reference clock of the onboard crystal.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm63138-armpll
+      - brcm,cygnus-armpll
+      - brcm,cygnus-genpll
+      - brcm,cygnus-lcpll0
+      - brcm,cygnus-mipipll
+      - brcm,cygnus-asiu-clk
+      - brcm,cygnus-audiopll
+      - brcm,hr2-armpll
+      - brcm,nsp-armpll
+      - brcm,nsp-genpll
+      - brcm,nsp-lcpll0
+      - brcm,ns2-genpll-scr
+      - brcm,ns2-genpll-sw
+      - brcm,ns2-lcpll-ddr
+      - brcm,ns2-lcpll-ports
+      - brcm,sr-genpll0
+      - brcm,sr-genpll1
+      - brcm,sr-genpll2
+      - brcm,sr-genpll3
+      - brcm,sr-genpll4
+      - brcm,sr-genpll5
+      - brcm,sr-genpll6
+      - brcm,sr-lcpll0
+      - brcm,sr-lcpll1
+      - brcm,sr-lcpll-pcie
+
+  reg:
+    minItems: 1
+    items:
+      - description: base register
+      - description: power register
+      - description: ASIU or split status register
+
+  clocks:
+    description: The input parent clock phandle for the PLL / ASIU clock. For
+      most iProc PLLs, this is an onboard crystal with a fixed rate.
+    maxItems: 1
+
+  '#clock-cells':
+    true
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 45
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,cygnus-armpll
+              - brcm,nsp-armpll
+    then:
+      properties:
+        '#clock-cells':
+          const: 0
+    else:
+      properties:
+        '#clock-cells':
+          const: 1
+      required:
+        - clock-output-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,cygnus-armpll
+              - brcm,cygnus-genpll
+              - brcm,cygnus-lcpll0
+              - brcm,cygnus-mipipll
+              - brcm,cygnus-asiu-clk
+              - brcm,cygnus-audiopll
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock index and ID for Cygnus.
+            These clock IDs are defined in:
+                "include/dt-bindings/clock/bcm-cygnus.h"
+
+            Clock      	Source (Parent)	Index	ID
+            -----	---------------	-----	--
+            crystal	N/A		N/A	N/A
+
+            armpll	crystal		N/A	N/A
+
+            keypad	crystal (ASIU)	0	BCM_CYGNUS_ASIU_KEYPAD_CLK
+            adc/tsc	crystal (ASIU)	1	BCM_CYGNUS_ASIU_ADC_CLK
+            pwm	crystal (ASIU)		2	BCM_CYGNUS_ASIU_PWM_CLK
+
+            genpll	crystal		0	BCM_CYGNUS_GENPLL
+            axi21	genpll		1	BCM_CYGNUS_GENPLL_AXI21_CLK
+            250mhz	genpll		2	BCM_CYGNUS_GENPLL_250MHZ_CLK
+            ihost_sys	genpll		3	BCM_CYGNUS_GENPLL_IHOST_SYS_CLK
+            enet_sw	genpll		4	BCM_CYGNUS_GENPLL_ENET_SW_CLK
+            audio_125	genpll		5	BCM_CYGNUS_GENPLL_AUDIO_125_CLK
+            can		genpll		6	BCM_CYGNUS_GENPLL_CAN_CLK
+
+            lcpll0	crystal		0	BCM_CYGNUS_LCPLL0
+            pcie_phy	lcpll0		1	BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK
+            ddr_phy	lcpll0		2	BCM_CYGNUS_LCPLL0_DDR_PHY_CLK
+            sdio	lcpll0		3	BCM_CYGNUS_LCPLL0_SDIO_CLK
+            usb_phy	lcpll0		4	BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK
+            smart_card	lcpll0		5	BCM_CYGNUS_LCPLL0_SMART_CARD_CLK
+            ch5_unused	lcpll0		6	BCM_CYGNUS_LCPLL0_CH5_UNUSED
+
+            mipipll	crystal		0	BCM_CYGNUS_MIPIPLL
+            ch0_unused	mipipll		1	BCM_CYGNUS_MIPIPLL_CH0_UNUSED
+            ch1_lcd	mipipll		2	BCM_CYGNUS_MIPIPLL_CH1_LCD
+            ch2_v3d	mipipll		3	BCM_CYGNUS_MIPIPLL_CH2_V3D
+            ch3_unused	mipipll		4	BCM_CYGNUS_MIPIPLL_CH3_UNUSED
+            ch4_unused	mipipll		5	BCM_CYGNUS_MIPIPLL_CH4_UNUSED
+            ch5_unused	mipipll		6	BCM_CYGNUS_MIPIPLL_CH5_UNUSED
+
+            audiopll	crystal		0	BCM_CYGNUS_AUDIOPLL
+            ch0_audio	audiopll	1	BCM_CYGNUS_AUDIOPLL_CH0
+            ch1_audio	audiopll	2	BCM_CYGNUS_AUDIOPLL_CH1
+            ch2_audio	audiopll	3	BCM_CYGNUS_AUDIOPLL_CH2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,hr2-armpll
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock for Hurricane 2:
+
+            Clock	Source		Index	ID
+            -----	------		-----	--
+            crystal	N/A		N/A	N/A
+
+            armpll	crystal		N/A	N/A
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,nsp-armpll
+              - brcm,nsp-genpll
+              - brcm,nsp-lcpll0
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock index and ID for Northstar and
+            Northstar Plus.  These clock IDs are defined in:
+                "include/dt-bindings/clock/bcm-nsp.h"
+
+            Clock	Source		Index	ID
+            -----	------		-----	--
+            crystal	N/A		N/A	N/A
+
+            armpll	crystal		N/A	N/A
+
+            genpll	crystal		0	BCM_NSP_GENPLL
+            phy		genpll		1	BCM_NSP_GENPLL_PHY_CLK
+            ethernetclk	genpll		2	BCM_NSP_GENPLL_ENET_SW_CLK
+            usbclk	genpll		3	BCM_NSP_GENPLL_USB_PHY_REF_CLK
+            iprocfast	genpll		4	BCM_NSP_GENPLL_IPROCFAST_CLK
+            sata1	genpll		5	BCM_NSP_GENPLL_SATA1_CLK
+            sata2	genpll		6	BCM_NSP_GENPLL_SATA2_CLK
+
+            lcpll0	crystal		0	BCM_NSP_LCPLL0
+            pcie_phy	lcpll0		1	BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK
+            sdio	lcpll0		2	BCM_NSP_LCPLL0_SDIO_CLK
+            ddr_phy	lcpll0		3	BCM_NSP_LCPLL0_DDR_PHY_CLK
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,ns2-genpll-scr
+              - brcm,ns2-genpll-sw
+              - brcm,ns2-lcpll-ddr
+              - brcm,ns2-lcpll-ports
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock index and ID for Northstar 2.
+            These clock IDs are defined in:
+                "include/dt-bindings/clock/bcm-ns2.h"
+
+            Clock	Source		Index	ID
+            -----	------		-----	--
+            crystal	N/A		N/A	N/A
+
+            genpll_scr	crystal		0	BCM_NS2_GENPLL_SCR
+            scr		genpll_scr	1	BCM_NS2_GENPLL_SCR_SCR_CLK
+            fs		genpll_scr	2	BCM_NS2_GENPLL_SCR_FS_CLK
+            audio_ref	genpll_scr	3	BCM_NS2_GENPLL_SCR_AUDIO_CLK
+            ch3_unused	genpll_scr	4	BCM_NS2_GENPLL_SCR_CH3_UNUSED
+            ch4_unused	genpll_scr	5	BCM_NS2_GENPLL_SCR_CH4_UNUSED
+            ch5_unused	genpll_scr	6	BCM_NS2_GENPLL_SCR_CH5_UNUSED
+
+            genpll_sw	crystal		0	BCM_NS2_GENPLL_SW
+            rpe		genpll_sw	1	BCM_NS2_GENPLL_SW_RPE_CLK
+            250		genpll_sw	2	BCM_NS2_GENPLL_SW_250_CLK
+            nic		genpll_sw	3	BCM_NS2_GENPLL_SW_NIC_CLK
+            chimp	genpll_sw	4	BCM_NS2_GENPLL_SW_CHIMP_CLK
+            port	genpll_sw	5	BCM_NS2_GENPLL_SW_PORT_CLK
+            sdio	genpll_sw	6	BCM_NS2_GENPLL_SW_SDIO_CLK
+
+            lcpll_ddr	crystal		0	BCM_NS2_LCPLL_DDR
+            pcie_sata_usb lcpll_ddr	1	BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK
+            ddr		lcpll_ddr	2	BCM_NS2_LCPLL_DDR_DDR_CLK
+            ch2_unused	lcpll_ddr	3	BCM_NS2_LCPLL_DDR_CH2_UNUSED
+            ch3_unused	lcpll_ddr	4	BCM_NS2_LCPLL_DDR_CH3_UNUSED
+            ch4_unused	lcpll_ddr	5	BCM_NS2_LCPLL_DDR_CH4_UNUSED
+            ch5_unused	lcpll_ddr	6	BCM_NS2_LCPLL_DDR_CH5_UNUSED
+
+            lcpll_ports	crystal		0	BCM_NS2_LCPLL_PORTS
+            wan		lcpll_ports	1	BCM_NS2_LCPLL_PORTS_WAN_CLK
+            rgmii	lcpll_ports	2	BCM_NS2_LCPLL_PORTS_RGMII_CLK
+            ch2_unused	lcpll_ports	3	BCM_NS2_LCPLL_PORTS_CH2_UNUSED
+            ch3_unused	lcpll_ports	4	BCM_NS2_LCPLL_PORTS_CH3_UNUSED
+            ch4_unused	lcpll_ports	5	BCM_NS2_LCPLL_PORTS_CH4_UNUSED
+            ch5_unused	lcpll_ports	6	BCM_NS2_LCPLL_PORTS_CH5_UNUSED
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,sr-genpll0
+              - brcm,sr-genpll1
+              - brcm,sr-genpll2
+              - brcm,sr-genpll3
+              - brcm,sr-genpll4
+              - brcm,sr-genpll5
+              - brcm,sr-genpll6
+              - brcm,sr-lcpll0
+              - brcm,sr-lcpll1
+              - brcm,sr-lcpll-pcie
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock index and ID for Stingray.
+            These clock IDs are defined in:
+                "include/dt-bindings/clock/bcm-sr.h"
+
+            Clock		Source		Index	ID
+            -----		------		-----	--
+            crystal		N/A		N/A	N/A
+            crmu_ref25m		crystal		N/A	N/A
+
+            genpll0		crystal		0	BCM_SR_GENPLL0
+            clk_125m		genpll0		1	BCM_SR_GENPLL0_125M_CLK
+            clk_scr		genpll0		2	BCM_SR_GENPLL0_SCR_CLK
+            clk_250		genpll0		3	BCM_SR_GENPLL0_250M_CLK
+            clk_pcie_axi	genpll0		4	BCM_SR_GENPLL0_PCIE_AXI_CLK
+            clk_paxc_axi_x2	genpll0		5	BCM_SR_GENPLL0_PAXC_AXI_X2_CLK
+            clk_paxc_axi	genpll0		6	BCM_SR_GENPLL0_PAXC_AXI_CLK
+
+            genpll1		crystal		0	BCM_SR_GENPLL1
+            clk_pcie_tl		genpll1		1	BCM_SR_GENPLL1_PCIE_TL_CLK
+            clk_mhb_apb		genpll1		2	BCM_SR_GENPLL1_MHB_APB_CLK
+
+            genpll2		crystal		0	BCM_SR_GENPLL2
+            clk_nic		genpll2		1	BCM_SR_GENPLL2_NIC_CLK
+            clk_ts_500_ref	genpll2		2	BCM_SR_GENPLL2_TS_500_REF_CLK
+            clk_125_nitro	genpll2		3	BCM_SR_GENPLL2_125_NITRO_CLK
+            clk_chimp		genpll2		4	BCM_SR_GENPLL2_CHIMP_CLK
+            clk_nic_flash	genpll2		5	BCM_SR_GENPLL2_NIC_FLASH_CLK
+            clk_fs		genpll2		6	BCM_SR_GENPLL2_FS_CLK
+
+            genpll3		crystal		0	BCM_SR_GENPLL3
+            clk_hsls		genpll3		1	BCM_SR_GENPLL3_HSLS_CLK
+            clk_sdio		genpll3		2	BCM_SR_GENPLL3_SDIO_CLK
+
+            genpll4		crystal		0	BCM_SR_GENPLL4
+            clk_ccn		genpll4		1	BCM_SR_GENPLL4_CCN_CLK
+            clk_tpiu_pll	genpll4		2	BCM_SR_GENPLL4_TPIU_PLL_CLK
+            clk_noc		genpll4		3	BCM_SR_GENPLL4_NOC_CLK
+            clk_chclk_fs4	genpll4		4	BCM_SR_GENPLL4_CHCLK_FS4_CLK
+            clk_bridge_fscpu	genpll4		5	BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK
+
+            genpll5		crystal		0	BCM_SR_GENPLL5
+            clk_fs4_hf		genpll5		1	BCM_SR_GENPLL5_FS4_HF_CLK
+            clk_crypto_ae	genpll5		2	BCM_SR_GENPLL5_CRYPTO_AE_CLK
+            clk_raid_ae		genpll5		3	BCM_SR_GENPLL5_RAID_AE_CLK
+
+            genpll6		crystal		0	BCM_SR_GENPLL6
+            clk_48_usb		genpll6		1	BCM_SR_GENPLL6_48_USB_CLK
+
+            lcpll0		crystal		0	BCM_SR_LCPLL0
+            clk_sata_refp 	lcpll0		1	BCM_SR_LCPLL0_SATA_REFP_CLK
+            clk_sata_refn	lcpll0		2	BCM_SR_LCPLL0_SATA_REFN_CLK
+            clk_sata_350	lcpll0		3	BCM_SR_LCPLL0_SATA_350_CLK
+            clk_sata_500	lcpll0		4	BCM_SR_LCPLL0_SATA_500_CLK
+
+            lcpll1		crystal		0	BCM_SR_LCPLL1
+            clk_wan		lcpll1		1	BCM_SR_LCPLL1_WAN_CLK
+            clk_usb_ref		lcpll1		2	BCM_SR_LCPLL1_USB_REF_CLK
+            clk_crmu_ts		lcpll1		3	BCM_SR_LCPLL1_CRMU_TS_CLK
+
+            lcpll_pcie		crystal		0	BCM_SR_LCPLL_PCIE
+            clk_pcie_phy_ref	lcpll1		1	BCM_SR_LCPLL_PCIE_PHY_REF_CLK
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,cygnus-genpll
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: genpll
+            - const: axi21
+            - const: 250mhz
+            - const: ihost_sys
+            - const: enet_sw
+            - const: audio_125
+            - const: can
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,nsp-lcpll0
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: lcpll0
+            - const: pcie_phy
+            - const: sdio
+            - const: ddr_phy
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,nsp-genpll
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: genpll
+            - const: phy
+            - const: ethernetclk
+            - const: usbclk
+            - const: iprocfast
+            - const: sata1
+            - const: sata2
+
+required:
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    osc1: oscillator {
+        #clock-cells = <0>;
+        compatible = "fixed-clock";
+        clock-frequency = <25000000>;
+    };
+
+    genpll@301d000 {
+        #clock-cells = <1>;
+        compatible = "brcm,cygnus-genpll";
+        reg = <0x301d000 0x2c>, <0x301c020 0x4>;
+        clocks = <&os1c>;
+        clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
+                     "enet_sw", "audio_125", "can";
+    };
+  - |
+    osc2: oscillator {
+        #clock-cells = <0>;
+        compatible = "fixed-clock";
+        clock-frequency = <25000000>;
+    };
+
+    asiu_clks@301d048 {
+        #clock-cells = <1>;
+        compatible = "brcm,cygnus-asiu-clk";
+        reg = <0x301d048 0xc>, <0x180aa024 0x4>;
+        clocks = <&osc2>;
+        clock-output-names = "keypad", "adc/touch", "pwm";
+    };
+  - |
+    arm_clk@0 {
+        #clock-cells = <0>;
+        compatible = "brcm,nsp-armpll";
+        clocks = <&osc>;
+        reg = <0x0 0x1000>;
+    };
diff --git a/Bindings/clock/brcm,kona-ccu.txt b/Bindings/clock/brcm,kona-ccu.txt
new file mode 100644
index 0000000..8e5a7d8
--- /dev/null
+++ b/Bindings/clock/brcm,kona-ccu.txt
@@ -0,0 +1,138 @@
+Broadcom Kona Family Clocks
+
+This binding is associated with Broadcom SoCs having "Kona" style
+clock control units (CCUs).  A CCU is a clock provider that manages
+a set of clock signals.  Each CCU is represented by a node in the
+device tree.
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible
+	Shall have a value of the form "brcm,<model>-<which>-ccu",
+	where <model> is a Broadcom SoC model number and <which> is
+	the name of a defined CCU.  For example:
+	    "brcm,bcm11351-root-ccu"
+	The compatible strings used for each supported SoC family
+	are defined below.
+- reg
+	Shall define the base and range of the address space
+	containing clock control registers
+- #clock-cells
+	Shall have value <1>.  The permitted clock-specifier values
+	are defined below.
+- clock-output-names
+	Shall be an ordered list of strings defining the names of
+	the clocks provided by the CCU.
+
+Device tree example:
+
+	slave_ccu: slave_ccu {
+		compatible = "brcm,bcm11351-slave-ccu";
+		reg = <0x3e011000 0x0f00>;
+		#clock-cells = <1>;
+		clock-output-names = "uartb",
+				     "uartb2",
+				     "uartb3",
+				     "uartb4";
+	};
+
+	ref_crystal_clk: ref_crystal {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	uart@3e002000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		reg = <0x3e002000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+BCM281XX family
+---------------
+CCU compatible string values for SoCs in the BCM281XX family are:
+    "brcm,bcm11351-root-ccu"
+    "brcm,bcm11351-aon-ccu"
+    "brcm,bcm11351-hub-ccu"
+    "brcm,bcm11351-master-ccu"
+    "brcm,bcm11351-slave-ccu"
+
+The following table defines the set of CCUs and clock specifiers for
+BCM281XX family clocks.  When a clock consumer references a clocks,
+its symbolic specifier (rather than its numeric index value) should
+be used.  These specifiers are defined in:
+    "include/dt-bindings/clock/bcm281xx.h"
+
+    CCU     Clock           Type    Index   Specifier
+    ---     -----           ----    -----   ---------
+    root    frac_1m         peri      0     BCM281XX_ROOT_CCU_FRAC_1M
+
+    aon     hub_timer       peri      0     BCM281XX_AON_CCU_HUB_TIMER
+    aon     pmu_bsc         peri      1     BCM281XX_AON_CCU_PMU_BSC
+    aon     pmu_bsc_var     peri      2     BCM281XX_AON_CCU_PMU_BSC_VAR
+
+    hub     tmon_1m         peri      0     BCM281XX_HUB_CCU_TMON_1M
+
+    master  sdio1           peri      0     BCM281XX_MASTER_CCU_SDIO1
+    master  sdio2           peri      1     BCM281XX_MASTER_CCU_SDIO2
+    master  sdio3           peri      2     BCM281XX_MASTER_CCU_SDIO3
+    master  sdio4           peri      3     BCM281XX_MASTER_CCU_SDIO4
+    master  dmac            peri      4     BCM281XX_MASTER_CCU_DMAC
+    master  usb_ic          peri      5     BCM281XX_MASTER_CCU_USB_IC
+    master  hsic2_48m       peri      6     BCM281XX_MASTER_CCU_HSIC_48M
+    master  hsic2_12m       peri      7     BCM281XX_MASTER_CCU_HSIC_12M
+
+    slave   uartb           peri      0     BCM281XX_SLAVE_CCU_UARTB
+    slave   uartb2          peri      1     BCM281XX_SLAVE_CCU_UARTB2
+    slave   uartb3          peri      2     BCM281XX_SLAVE_CCU_UARTB3
+    slave   uartb4          peri      3     BCM281XX_SLAVE_CCU_UARTB4
+    slave   ssp0            peri      4     BCM281XX_SLAVE_CCU_SSP0
+    slave   ssp2            peri      5     BCM281XX_SLAVE_CCU_SSP2
+    slave   bsc1            peri      6     BCM281XX_SLAVE_CCU_BSC1
+    slave   bsc2            peri      7     BCM281XX_SLAVE_CCU_BSC2
+    slave   bsc3            peri      8     BCM281XX_SLAVE_CCU_BSC3
+    slave   pwm             peri      9     BCM281XX_SLAVE_CCU_PWM
+
+
+BCM21664 family
+---------------
+CCU compatible string values for SoCs in the BCM21664 family are:
+    "brcm,bcm21664-root-ccu"
+    "brcm,bcm21664-aon-ccu"
+    "brcm,bcm21664-master-ccu"
+    "brcm,bcm21664-slave-ccu"
+
+The following table defines the set of CCUs and clock specifiers for
+BCM21664 family clocks.  When a clock consumer references a clocks,
+its symbolic specifier (rather than its numeric index value) should
+be used.  These specifiers are defined in:
+    "include/dt-bindings/clock/bcm21664.h"
+
+    CCU     Clock           Type    Index   Specifier
+    ---     -----           ----    -----   ---------
+    root    frac_1m         peri      0     BCM21664_ROOT_CCU_FRAC_1M
+
+    aon     hub_timer       peri      0     BCM21664_AON_CCU_HUB_TIMER
+
+    master  sdio1           peri      0     BCM21664_MASTER_CCU_SDIO1
+    master  sdio2           peri      1     BCM21664_MASTER_CCU_SDIO2
+    master  sdio3           peri      2     BCM21664_MASTER_CCU_SDIO3
+    master  sdio4           peri      3     BCM21664_MASTER_CCU_SDIO4
+    master  sdio1_sleep     peri      4     BCM21664_MASTER_CCU_SDIO1_SLEEP
+    master  sdio2_sleep     peri      5     BCM21664_MASTER_CCU_SDIO2_SLEEP
+    master  sdio3_sleep     peri      6     BCM21664_MASTER_CCU_SDIO3_SLEEP
+    master  sdio4_sleep     peri      7     BCM21664_MASTER_CCU_SDIO4_SLEEP
+
+    slave   uartb           peri      0     BCM21664_SLAVE_CCU_UARTB
+    slave   uartb2          peri      1     BCM21664_SLAVE_CCU_UARTB2
+    slave   uartb3          peri      2     BCM21664_SLAVE_CCU_UARTB3
+    slave   uartb4          peri      3     BCM21664_SLAVE_CCU_UARTB4
+    slave   bsc1            peri      4     BCM21664_SLAVE_CCU_BSC1
+    slave   bsc2            peri      5     BCM21664_SLAVE_CCU_BSC2
+    slave   bsc3            peri      6     BCM21664_SLAVE_CCU_BSC3
+    slave   bsc4            peri      7     BCM21664_SLAVE_CCU_BSC4
diff --git a/Bindings/clock/calxeda.yaml b/Bindings/clock/calxeda.yaml
new file mode 100644
index 0000000..a88fbe2
--- /dev/null
+++ b/Bindings/clock/calxeda.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/calxeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda highbank platform Clock Controller
+
+description: |
+  This binding covers the Calxeda SoC internal peripheral and bus clocks
+  as used by peripherals. The clocks live inside the "system register"
+  region of the SoC, so are typically presented as children of an
+  "hb-sregs" node.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - calxeda,hb-pll-clock
+      - calxeda,hb-a9periph-clock
+      - calxeda,hb-a9bus-clock
+      - calxeda,hb-emmc-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sregs@3fffc000 {
+        compatible = "calxeda,hb-sregs";
+        reg = <0x3fffc000 0x1000>;
+
+        clocks {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            osc: oscillator {
+                #clock-cells = <0>;
+                compatible = "fixed-clock";
+                clock-frequency = <33333000>;
+            };
+
+            ddrpll: ddrpll@108 {
+                #clock-cells = <0>;
+                compatible = "calxeda,hb-pll-clock";
+                clocks = <&osc>;
+                reg = <0x108>;
+            };
+
+            a9pll: a9pll@100 {
+                #clock-cells = <0>;
+                compatible = "calxeda,hb-pll-clock";
+                clocks = <&osc>;
+                reg = <0x100>;
+            };
+
+            a9periphclk: a9periphclk@104 {
+                #clock-cells = <0>;
+                compatible = "calxeda,hb-a9periph-clock";
+                clocks = <&a9pll>;
+                reg = <0x104>;
+            };
+        };
+    };
+
+...
diff --git a/Bindings/clock/canaan,k210-clk.yaml b/Bindings/clock/canaan,k210-clk.yaml
new file mode 100644
index 0000000..380cb6d
--- /dev/null
+++ b/Bindings/clock/canaan,k210-clk.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/canaan,k210-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 Clock
+
+maintainers:
+  - Damien Le Moal <dlemoal@kernel.org>
+
+description: |
+  Canaan Kendryte K210 SoC clocks driver bindings. The clock
+  controller node must be defined as a child node of the K210
+  system controller node.
+
+  See also:
+  - dt-bindings/clock/k210-clk.h
+
+properties:
+  compatible:
+    const: canaan,k210-clk
+
+  clocks:
+    maxItems: 1
+    description:
+      Phandle of the SoC 26MHz fixed-rate oscillator clock.
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/k210-clk.h>
+    clocks {
+      in0: oscillator {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <26000000>;
+      };
+    };
+
+    /* ... */
+    sysclk: clock-controller {
+      #clock-cells = <1>;
+      compatible = "canaan,k210-clk";
+      clocks = <&in0>;
+    };
diff --git a/Bindings/clock/cirrus,cs2000-cp.yaml b/Bindings/clock/cirrus,cs2000-cp.yaml
new file mode 100644
index 0000000..d416c37
--- /dev/null
+++ b/Bindings/clock/cirrus,cs2000-cp.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/cirrus,cs2000-cp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+description: |
+  The CS2000-CP is an extremely versatile system clocking device that
+  utilizes a programmable phase lock loop.
+
+  Link: https://www.cirrus.com/products/cs2000/
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs2000-cp
+
+  clocks:
+    description:
+      Common clock binding for CLK_IN, XTI/REF_CLK
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk_in
+      - const: ref_clk
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  cirrus,aux-output-source:
+    description:
+      Specifies the function of the auxiliary clock output pin
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # CS2000CP_AUX_OUTPUT_REF_CLK:  ref_clk input
+      - 1 # CS2000CP_AUX_OUTPUT_CLK_IN:   clk_in input
+      - 2 # CS2000CP_AUX_OUTPUT_CLK_OUT:  clk_out output
+      - 3 # CS2000CP_AUX_OUTPUT_PLL_LOCK: pll lock status
+    default: 0
+
+  cirrus,clock-skip:
+    description:
+      This mode allows the PLL to maintain lock even when CLK_IN
+      has missing pulses for up to 20 ms.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  cirrus,dynamic-mode:
+    description:
+      In dynamic mode, the CLK_IN input is used to drive the
+      digital PLL of the silicon.
+      If not given, the static mode shall be used to derive the
+      output signal directly from the REF_CLK input.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cirrus,cs2000-cp.h>
+
+    i2c@0 {
+      reg = <0x0 0x100>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-controller@4f {
+        #clock-cells = <0>;
+        compatible = "cirrus,cs2000-cp";
+        reg = <0x4f>;
+        clocks = <&rcar_sound 0>, <&x12_clk>;
+        clock-names = "clk_in", "ref_clk";
+        cirrus,aux-output-source = <CS2000CP_AUX_OUTPUT_CLK_OUT>;
+      };
+    };
diff --git a/Bindings/clock/cirrus,lochnagar.yaml b/Bindings/clock/cirrus,lochnagar.yaml
new file mode 100644
index 0000000..59de125
--- /dev/null
+++ b/Bindings/clock/cirrus,lochnagar.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Lochnagar is an evaluation and development board for Cirrus Logic
+  Smart CODEC and Amp devices. It allows the connection of most Cirrus
+  Logic devices on mini-cards, as well as allowing connection of various
+  application processor systems to provide a full evaluation platform.
+  Audio system topology, clocking and power can all be controlled through
+  the Lochnagar, allowing the device under test to be used in a variety of
+  possible use cases.
+
+  This binding document describes the binding for the clock portion of the
+  driver.
+
+  Also see these documents for generic binding information:
+    [1] Clock : ../clock/clock-bindings.txt
+
+  And these for relevant defines:
+    [2] include/dt-bindings/clock/lochnagar.h
+
+  This binding must be part of the Lochnagar MFD binding:
+    [3] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+  compatible:
+    enum:
+      - cirrus,lochnagar1-clk
+      - cirrus,lochnagar2-clk
+
+  '#clock-cells':
+    description:
+      The first cell indicates the clock number, see [2] for available
+      clocks and [1].
+    const: 1
+
+  clock-names:
+    items:
+      enum:
+        - ln-cdc-clkout # Output clock from CODEC card.
+        - ln-dsp-clkout # Output clock from DSP card.
+        - ln-gf-mclk1 # Optional input clock from host system.
+        - ln-gf-mclk2 # Optional input clock from host system.
+        - ln-gf-mclk3 # Optional input clock from host system.
+        - ln-gf-mclk4 # Optional input clock from host system.
+        - ln-psia1-mclk # Optional input clock from external connector.
+        - ln-psia2-mclk # Optional input clock from external connector.
+        - ln-spdif-mclk # Optional input clock from SPDIF.
+        - ln-spdif-clkout # Optional input clock from SPDIF.
+        - ln-adat-mclk # Optional input clock from ADAT.
+        - ln-pmic-32k # On board fixed clock.
+        - ln-clk-12m # On board fixed clock.
+        - ln-clk-11m # On board fixed clock.
+        - ln-clk-24m # On board fixed clock.
+        - ln-clk-22m # On board fixed clock.
+        - ln-clk-8m # On board fixed clock.
+        - ln-usb-clk-24m # On board fixed clock.
+        - ln-usb-clk-12m # On board fixed clock.
+    minItems: 1
+    maxItems: 19
+
+  clocks: true
+  assigned-clocks: true
+  assigned-clock-parents: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#clock-cells'
diff --git a/Bindings/clock/clk-palmas-clk32kg-clocks.txt b/Bindings/clock/clk-palmas-clk32kg-clocks.txt
new file mode 100644
index 0000000..4208886
--- /dev/null
+++ b/Bindings/clock/clk-palmas-clk32kg-clocks.txt
@@ -0,0 +1,35 @@
+* Palmas 32KHz clocks *
+
+Palmas device has two clock output pins for 32KHz, KG and KG_AUDIO.
+
+This binding uses the common clock binding ./clock-bindings.txt.
+
+Required properties:
+- compatible :	"ti,palmas-clk32kg" for clk32kg clock
+		"ti,palmas-clk32kgaudio" for clk32kgaudio clock
+- #clock-cells : shall be set to 0.
+
+Optional property:
+- ti,external-sleep-control: The external enable input pins controlled the
+	enable/disable of clocks.  The external enable input pins ENABLE1,
+	ENABLE2 and NSLEEP. The valid values for the external pins are:
+		PALMAS_EXT_CONTROL_PIN_ENABLE1 for ENABLE1 pin
+		PALMAS_EXT_CONTROL_PIN_ENABLE2 for ENABLE2 pin
+		PALMAS_EXT_CONTROL_PIN_NSLEEP for NSLEEP pin
+	Option 0 or missing this property means the clock is enabled/disabled
+	via register access and these pins do not have any control.
+	The macros of external control pins for DTS is defined at
+	dt-bindings/mfd/palmas.h
+
+Example:
+	#include <dt-bindings/mfd/palmas.h>
+	...
+	palmas: tps65913@58 {
+		...
+		clk32kg: palmas_clk32k@0 {
+			compatible = "ti,palmas-clk32kg";
+			#clock-cells = <0>;
+			ti,external-sleep-control = <PALMAS_EXT_CONTROL_PIN_NSLEEP>;
+		};
+		...
+	};
diff --git a/Bindings/clock/clock-bindings.txt b/Bindings/clock/clock-bindings.txt
new file mode 100644
index 0000000..6fe5413
--- /dev/null
+++ b/Bindings/clock/clock-bindings.txt
@@ -0,0 +1,2 @@
+This file has moved to the clock binding schema:
+https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/clock/clock.yaml
diff --git a/Bindings/clock/clps711x-clock.txt b/Bindings/clock/clps711x-clock.txt
new file mode 100644
index 0000000..f1bd53f
--- /dev/null
+++ b/Bindings/clock/clps711x-clock.txt
@@ -0,0 +1,19 @@
+* Clock bindings for the Cirrus Logic CLPS711X CPUs
+
+Required properties:
+- compatible       : Shall contain "cirrus,ep7209-clk".
+- reg              : Address of the internal register set.
+- startup-frequency: Factory set CPU startup frequency in HZ.
+- #clock-cells     : Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/clps711x-clock.h
+for the full list of CLPS711X clock IDs.
+
+Example:
+	clks: clks@80000000 {
+		#clock-cells = <1>;
+		compatible = "cirrus,ep7312-clk", "cirrus,ep7209-clk";
+		reg = <0x80000000 0xc000>;
+		startup-frequency = <73728000>;
+	};
diff --git a/Bindings/clock/dove-divider-clock.txt b/Bindings/clock/dove-divider-clock.txt
new file mode 100644
index 0000000..217871f
--- /dev/null
+++ b/Bindings/clock/dove-divider-clock.txt
@@ -0,0 +1,28 @@
+PLL divider based Dove clocks
+
+Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide
+high speed clocks for a number of peripherals.  These dividers are part of
+the PMU, and thus this node should be a child of the PMU node.
+
+The following clocks are provided:
+
+ID	Clock
+-------------
+0	AXI bus clock
+1	GPU clock
+2	VMeta clock
+3	LCD clock
+
+Required properties:
+- compatible : shall be "marvell,dove-divider-clock"
+- reg : shall be the register address of the Core PLL and Clock Divider
+   Control 0 register.  This will cover that register, as well as the
+   Core PLL and Clock Divider Control 1 register.  Thus, it will have
+   a size of 8.
+- #clock-cells : from common clock binding; shall be set to 1
+
+divider_clk: core-clock@64 {
+	compatible = "marvell,dove-divider-clock";
+	reg = <0x0064 0x8>;
+	#clock-cells = <1>;
+};
diff --git a/Bindings/clock/fixed-clock.yaml b/Bindings/clock/fixed-clock.yaml
new file mode 100644
index 0000000..b0a4fb8
--- /dev/null
+++ b/Bindings/clock/fixed-clock.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fixed-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple fixed-rate clock sources
+
+maintainers:
+  - Michael Turquette <mturquette@baylibre.com>
+  - Stephen Boyd <sboyd@kernel.org>
+
+properties:
+  compatible:
+    const: fixed-clock
+
+  "#clock-cells":
+    const: 0
+
+  clock-frequency: true
+
+  clock-accuracy:
+    description: accuracy of clock in ppb (parts per billion).
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clock-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    clock {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <1000000000>;
+      clock-accuracy = <100>;
+    };
+...
diff --git a/Bindings/clock/fixed-factor-clock.yaml b/Bindings/clock/fixed-factor-clock.yaml
new file mode 100644
index 0000000..8f71ab3
--- /dev/null
+++ b/Bindings/clock/fixed-factor-clock.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fixed-factor-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple fixed factor rate clock sources
+
+maintainers:
+  - Michael Turquette <mturquette@baylibre.com>
+  - Stephen Boyd <sboyd@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - fixed-factor-clock
+
+  "#clock-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-div:
+    description: Fixed divider
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+
+  clock-mult:
+    description: Fixed multiplier
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - "#clock-cells"
+  - clock-div
+  - clock-mult
+
+additionalProperties: false
+
+examples:
+  - |
+    clock {
+      compatible = "fixed-factor-clock";
+      clocks = <&parentclk>;
+      #clock-cells = <0>;
+      clock-div = <2>;
+      clock-mult = <1>;
+    };
+...
diff --git a/Bindings/clock/fixed-mmio-clock.yaml b/Bindings/clock/fixed-mmio-clock.yaml
new file mode 100644
index 0000000..e22fc27
--- /dev/null
+++ b/Bindings/clock/fixed-mmio-clock.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fixed-mmio-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple memory mapped IO fixed-rate clock sources
+
+description:
+  This binding describes a fixed-rate clock for which the frequency can
+  be read from a single 32-bit memory mapped I/O register.
+
+  It was designed for test systems, like FPGA, not for complete,
+  finished SoCs.
+
+maintainers:
+  - Jan Kotas <jank@cadence.com>
+
+properties:
+  compatible:
+    const: fixed-mmio-clock
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    sysclock: sysclock@fd020004 {
+      compatible = "fixed-mmio-clock";
+      #clock-cells = <0>;
+      reg = <0xfd020004 0x4>;
+      clock-output-names = "sysclk";
+    };
+...
diff --git a/Bindings/clock/fsl,flexspi-clock.yaml b/Bindings/clock/fsl,flexspi-clock.yaml
new file mode 100644
index 0000000..1fa390e
--- /dev/null
+++ b/Bindings/clock/fsl,flexspi-clock.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,flexspi-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale FlexSPI clock driver for Layerscape SoCs
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description:
+  The Freescale Layerscape SoCs have a special FlexSPI clock which is
+  derived from the platform PLL.
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls1028a-flexspi-clk
+      - fsl,lx2160a-flexspi-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    dcfg {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        fspi_clk: clock-controller@900 {
+            compatible = "fsl,ls1028a-flexspi-clk";
+            reg = <0x900 0x4>;
+            #clock-cells = <0>;
+            clocks = <&parentclk>;
+            clock-output-names = "fspi_clk";
+        };
+    };
diff --git a/Bindings/clock/fsl,imx8-acm.yaml b/Bindings/clock/fsl,imx8-acm.yaml
new file mode 100644
index 0000000..07b9d21
--- /dev/null
+++ b/Bindings/clock/fsl,imx8-acm.yaml
@@ -0,0 +1,282 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,imx8-acm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8 Audio Clock Mux
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+  NXP i.MX8 Audio Clock Mux is dedicated clock muxing IP
+  used to control Audio related clock on the SoC.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8dxl-acm
+      - fsl,imx8qm-acm
+      - fsl,imx8qxp-acm
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    minItems: 13
+    maxItems: 21
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8-clock.h
+      for the full list of i.MX8 ACM clock IDs.
+
+  clocks:
+    minItems: 13
+    maxItems: 27
+
+  clock-names:
+    minItems: 13
+    maxItems: 27
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qxp-acm
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: power domain of IMX_SC_R_AUDIO_CLK_0
+            - description: power domain of IMX_SC_R_AUDIO_CLK_1
+            - description: power domain of IMX_SC_R_MCLK_OUT_0
+            - description: power domain of IMX_SC_R_MCLK_OUT_1
+            - description: power domain of IMX_SC_R_AUDIO_PLL_0
+            - description: power domain of IMX_SC_R_AUDIO_PLL_1
+            - description: power domain of IMX_SC_R_ASRC_0
+            - description: power domain of IMX_SC_R_ASRC_1
+            - description: power domain of IMX_SC_R_ESAI_0
+            - description: power domain of IMX_SC_R_SAI_0
+            - description: power domain of IMX_SC_R_SAI_1
+            - description: power domain of IMX_SC_R_SAI_2
+            - description: power domain of IMX_SC_R_SAI_3
+            - description: power domain of IMX_SC_R_SAI_4
+            - description: power domain of IMX_SC_R_SAI_5
+            - description: power domain of IMX_SC_R_SPDIF_0
+            - description: power domain of IMX_SC_R_MQS_0
+
+        clocks:
+          minItems: 18
+          maxItems: 18
+
+        clock-names:
+          items:
+            - const: aud_rec_clk0_lpcg_clk
+            - const: aud_rec_clk1_lpcg_clk
+            - const: aud_pll_div_clk0_lpcg_clk
+            - const: aud_pll_div_clk1_lpcg_clk
+            - const: ext_aud_mclk0
+            - const: ext_aud_mclk1
+            - const: esai0_rx_clk
+            - const: esai0_rx_hf_clk
+            - const: esai0_tx_clk
+            - const: esai0_tx_hf_clk
+            - const: spdif0_rx
+            - const: sai0_rx_bclk
+            - const: sai0_tx_bclk
+            - const: sai1_rx_bclk
+            - const: sai1_tx_bclk
+            - const: sai2_rx_bclk
+            - const: sai3_rx_bclk
+            - const: sai4_rx_bclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-acm
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: power domain of IMX_SC_R_AUDIO_CLK_0
+            - description: power domain of IMX_SC_R_AUDIO_CLK_1
+            - description: power domain of IMX_SC_R_MCLK_OUT_0
+            - description: power domain of IMX_SC_R_MCLK_OUT_1
+            - description: power domain of IMX_SC_R_AUDIO_PLL_0
+            - description: power domain of IMX_SC_R_AUDIO_PLL_1
+            - description: power domain of IMX_SC_R_ASRC_0
+            - description: power domain of IMX_SC_R_ASRC_1
+            - description: power domain of IMX_SC_R_ESAI_0
+            - description: power domain of IMX_SC_R_ESAI_1
+            - description: power domain of IMX_SC_R_SAI_0
+            - description: power domain of IMX_SC_R_SAI_1
+            - description: power domain of IMX_SC_R_SAI_2
+            - description: power domain of IMX_SC_R_SAI_3
+            - description: power domain of IMX_SC_R_SAI_4
+            - description: power domain of IMX_SC_R_SAI_5
+            - description: power domain of IMX_SC_R_SAI_6
+            - description: power domain of IMX_SC_R_SAI_7
+            - description: power domain of IMX_SC_R_SPDIF_0
+            - description: power domain of IMX_SC_R_SPDIF_1
+            - description: power domain of IMX_SC_R_MQS_0
+
+        clocks:
+          minItems: 27
+          maxItems: 27
+
+        clock-names:
+          items:
+            - const: aud_rec_clk0_lpcg_clk
+            - const: aud_rec_clk1_lpcg_clk
+            - const: aud_pll_div_clk0_lpcg_clk
+            - const: aud_pll_div_clk1_lpcg_clk
+            - const: mlb_clk
+            - const: hdmi_rx_mclk
+            - const: ext_aud_mclk0
+            - const: ext_aud_mclk1
+            - const: esai0_rx_clk
+            - const: esai0_rx_hf_clk
+            - const: esai0_tx_clk
+            - const: esai0_tx_hf_clk
+            - const: esai1_rx_clk
+            - const: esai1_rx_hf_clk
+            - const: esai1_tx_clk
+            - const: esai1_tx_hf_clk
+            - const: spdif0_rx
+            - const: spdif1_rx
+            - const: sai0_rx_bclk
+            - const: sai0_tx_bclk
+            - const: sai1_rx_bclk
+            - const: sai1_tx_bclk
+            - const: sai2_rx_bclk
+            - const: sai3_rx_bclk
+            - const: sai4_rx_bclk
+            - const: sai5_tx_bclk
+            - const: sai6_rx_bclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8dxl-acm
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: power domain of IMX_SC_R_AUDIO_CLK_0
+            - description: power domain of IMX_SC_R_AUDIO_CLK_1
+            - description: power domain of IMX_SC_R_MCLK_OUT_0
+            - description: power domain of IMX_SC_R_MCLK_OUT_1
+            - description: power domain of IMX_SC_R_AUDIO_PLL_0
+            - description: power domain of IMX_SC_R_AUDIO_PLL_1
+            - description: power domain of IMX_SC_R_ASRC_0
+            - description: power domain of IMX_SC_R_SAI_0
+            - description: power domain of IMX_SC_R_SAI_1
+            - description: power domain of IMX_SC_R_SAI_2
+            - description: power domain of IMX_SC_R_SAI_3
+            - description: power domain of IMX_SC_R_SPDIF_0
+            - description: power domain of IMX_SC_R_MQS_0
+
+        clocks:
+          minItems: 13
+          maxItems: 13
+
+        clock-names:
+          items:
+            - const: aud_rec_clk0_lpcg_clk
+            - const: aud_rec_clk1_lpcg_clk
+            - const: aud_pll_div_clk0_lpcg_clk
+            - const: aud_pll_div_clk1_lpcg_clk
+            - const: ext_aud_mclk0
+            - const: ext_aud_mclk1
+            - const: spdif0_rx
+            - const: sai0_rx_bclk
+            - const: sai0_tx_bclk
+            - const: sai1_rx_bclk
+            - const: sai1_tx_bclk
+            - const: sai2_rx_bclk
+            - const: sai3_rx_bclk
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    clock-controller@59e00000 {
+        compatible = "fsl,imx8qxp-acm";
+        reg = <0x59e00000 0x1d0000>;
+        #clock-cells = <1>;
+        power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>,
+                        <&pd IMX_SC_R_AUDIO_CLK_1>,
+                        <&pd IMX_SC_R_MCLK_OUT_0>,
+                        <&pd IMX_SC_R_MCLK_OUT_1>,
+                        <&pd IMX_SC_R_AUDIO_PLL_0>,
+                        <&pd IMX_SC_R_AUDIO_PLL_1>,
+                        <&pd IMX_SC_R_ASRC_0>,
+                        <&pd IMX_SC_R_ASRC_1>,
+                        <&pd IMX_SC_R_ESAI_0>,
+                        <&pd IMX_SC_R_SAI_0>,
+                        <&pd IMX_SC_R_SAI_1>,
+                        <&pd IMX_SC_R_SAI_2>,
+                        <&pd IMX_SC_R_SAI_3>,
+                        <&pd IMX_SC_R_SAI_4>,
+                        <&pd IMX_SC_R_SAI_5>,
+                        <&pd IMX_SC_R_SPDIF_0>,
+                        <&pd IMX_SC_R_MQS_0>;
+        clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>,
+                 <&aud_rec1_lpcg IMX_LPCG_CLK_0>,
+                 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+                 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+                 <&clk_ext_aud_mclk0>,
+                 <&clk_ext_aud_mclk1>,
+                 <&clk_esai0_rx_clk>,
+                 <&clk_esai0_rx_hf_clk>,
+                 <&clk_esai0_tx_clk>,
+                 <&clk_esai0_tx_hf_clk>,
+                 <&clk_spdif0_rx>,
+                 <&clk_sai0_rx_bclk>,
+                 <&clk_sai0_tx_bclk>,
+                 <&clk_sai1_rx_bclk>,
+                 <&clk_sai1_tx_bclk>,
+                 <&clk_sai2_rx_bclk>,
+                 <&clk_sai3_rx_bclk>,
+                 <&clk_sai4_rx_bclk>;
+        clock-names = "aud_rec_clk0_lpcg_clk",
+                      "aud_rec_clk1_lpcg_clk",
+                      "aud_pll_div_clk0_lpcg_clk",
+                      "aud_pll_div_clk1_lpcg_clk",
+                      "ext_aud_mclk0",
+                      "ext_aud_mclk1",
+                      "esai0_rx_clk",
+                      "esai0_rx_hf_clk",
+                      "esai0_tx_clk",
+                      "esai0_tx_hf_clk",
+                      "spdif0_rx",
+                      "sai0_rx_bclk",
+                      "sai0_tx_bclk",
+                      "sai1_rx_bclk",
+                      "sai1_tx_bclk",
+                      "sai2_rx_bclk",
+                      "sai3_rx_bclk",
+                      "sai4_rx_bclk";
+    };
diff --git a/Bindings/clock/fsl,imx8m-anatop.yaml b/Bindings/clock/fsl,imx8m-anatop.yaml
new file mode 100644
index 0000000..bbd22e9
--- /dev/null
+++ b/Bindings/clock/fsl,imx8m-anatop.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,imx8m-anatop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Family Anatop Module
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  NXP i.MX8M Family anatop PLL module which generates PLL to CCM root.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx8mm-anatop
+          - fsl,imx8mq-anatop
+      - items:
+          - enum:
+              - fsl,imx8mn-anatop
+              - fsl,imx8mp-anatop
+          - const: fsl,imx8mm-anatop
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    anatop: clock-controller@30360000 {
+        compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop";
+        reg = <0x30360000 0x10000>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/fsl,plldig.yaml b/Bindings/clock/fsl,plldig.yaml
new file mode 100644
index 0000000..88dd9c1
--- /dev/null
+++ b/Bindings/clock/fsl,plldig.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,plldig.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP QorIQ Layerscape LS1028A Display PIXEL Clock
+
+maintainers:
+  - Wen He <wen.he_1@nxp.com>
+
+description: |
+  NXP LS1028A has a clock domain PXLCLK0 used for the Display output
+  interface in the display core, as implemented in TSMC CLN28HPM PLL.
+  which generate and offers pixel clocks to Display.
+
+properties:
+  compatible:
+    const: fsl,ls1028a-plldig
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  fsl,vco-hz:
+    description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency
+      of this PLL cannot be changed during runtime only at startup. Therefore,
+      the output frequencies are very limited and might not even closely match
+      the requested frequency. To work around this restriction the user may specify
+      its own desired VCO frequency for the PLL.
+    minimum: 650000000
+    maximum: 1300000000
+    default: 1188000000
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Display PIXEL Clock node:
+  - |
+    dpclk: clock-display@f1f0000 {
+        compatible = "fsl,ls1028a-plldig";
+        reg = <0xf1f0000 0xffff>;
+        #clock-cells = <0>;
+        clocks = <&osc_27m>;
+    };
+
+...
diff --git a/Bindings/clock/fsl,sai-clock.yaml b/Bindings/clock/fsl,sai-clock.yaml
new file mode 100644
index 0000000..3bca9d1
--- /dev/null
+++ b/Bindings/clock/fsl,sai-clock.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,sai-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SAI bitclock-as-a-clock
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  It is possible to use the BCLK pin of a SAI module as a generic clock
+  output. Some SoC are very constrained in their pin multiplexer
+  configuration. Eg. pins can only be changed groups. For example, on the
+  LS1028A SoC you can only enable SAIs in pairs. If you use only one SAI,
+  the second pins are wasted. Using this binding it is possible to use the
+  clock of the second SAI as a MCLK clock for an audio codec, for example.
+
+  This is a composite of a gated clock and a divider clock.
+
+properties:
+  compatible:
+    const: fsl,vf610-sai-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mclk: clock-mclk@f130080 {
+            compatible = "fsl,vf610-sai-clock";
+            reg = <0x0 0xf130080 0x0 0x80>;
+            #clock-cells = <0>;
+            clocks = <&parentclk>;
+        };
+    };
diff --git a/Bindings/clock/fsl,scu-clk.yaml b/Bindings/clock/fsl,scu-clk.yaml
new file mode 100644
index 0000000..36d4cfc
--- /dev/null
+++ b/Bindings/clock/fsl,scu-clk.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,scu-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Clock Controller Based on SCU Message Protocol
+
+maintainers:
+  - Abel Vesa <abel.vesa@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+  This binding uses the common clock binding.
+  (Documentation/devicetree/bindings/clock/clock-bindings.txt)
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See the full list of clock IDs from
+  include/dt-bindings/clock/imx8qxp-clock.h
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8dxl-clk
+          - fsl,imx8qm-clk
+          - fsl,imx8qxp-clk
+      - const: fsl,scu-clk
+
+  '#clock-cells':
+    const: 2
+
+required:
+  - compatible
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller {
+        compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+        #clock-cells = <2>;
+    };
diff --git a/Bindings/clock/fujitsu,mb86s70-crg11.txt b/Bindings/clock/fujitsu,mb86s70-crg11.txt
new file mode 100644
index 0000000..3323962
--- /dev/null
+++ b/Bindings/clock/fujitsu,mb86s70-crg11.txt
@@ -0,0 +1,26 @@
+Fujitsu CRG11 clock driver bindings
+-----------------------------------
+
+Required properties :
+- compatible : Shall contain "fujitsu,mb86s70-crg11"
+- #clock-cells : Shall be 3 {cntrlr domain port}
+
+The consumer specifies the desired clock pointing to its phandle.
+
+Example:
+
+	clock: crg11 {
+		compatible = "fujitsu,mb86s70-crg11";
+		#clock-cells = <3>;
+	};
+
+	mhu: mhu0@2b1f0000 {
+		#mbox-cells = <1>;
+		compatible = "arm,mhu";
+		reg = <0 0x2B1F0000 0x1000>;
+		interrupts = <0 36 4>, /* LP Non-Sec */
+			     <0 35 4>, /* HP Non-Sec */
+			     <0 37 4>; /* Secure */
+		clocks = <&clock 0 2 1>; /* Cntrlr:0 Domain:2 Port:1 */
+		clock-names = "clk";
+	};
diff --git a/Bindings/clock/gpio-gate-clock.yaml b/Bindings/clock/gpio-gate-clock.yaml
new file mode 100644
index 0000000..d09d0e3
--- /dev/null
+++ b/Bindings/clock/gpio-gate-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/gpio-gate-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple GPIO clock gate
+
+maintainers:
+  - Jyri Sarha <jsarha@ti.com>
+
+properties:
+  compatible:
+    const: gpio-gate-clock
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  enable-gpios:
+    description: GPIO reference for enabling and disabling the clock.
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    clock {
+        compatible = "gpio-gate-clock";
+        clocks = <&parentclk>;
+        #clock-cells = <0>;
+        enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Bindings/clock/gpio-mux-clock.yaml b/Bindings/clock/gpio-mux-clock.yaml
new file mode 100644
index 0000000..1e21f8b
--- /dev/null
+++ b/Bindings/clock/gpio-mux-clock.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/gpio-mux-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple GPIO clock multiplexer
+
+maintainers:
+  - Sergej Sawazki <ce3a@gmx.de>
+
+properties:
+  compatible:
+    const: gpio-mux-clock
+
+  clocks:
+    items:
+      - description: First parent clock
+      - description: Second parent clock
+
+  '#clock-cells':
+    const: 0
+
+  select-gpios:
+    description: GPIO reference for selecting the parent clock.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+  - select-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    clock {
+            compatible = "gpio-mux-clock";
+            clocks = <&parentclk1>, <&parentclk2>;
+            #clock-cells = <0>;
+            select-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Bindings/clock/hi3620-clock.txt b/Bindings/clock/hi3620-clock.txt
new file mode 100644
index 0000000..dad6269
--- /dev/null
+++ b/Bindings/clock/hi3620-clock.txt
@@ -0,0 +1,20 @@
+* Hisilicon Hi3620 Clock Controller
+
+The Hi3620 clock controller generates and supplies clock to various
+controllers within the Hi3620 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "hisilicon,hi3620-clock" - controller compatible with Hi3620 SoC.
+  - "hisilicon,hi3620-mmc-clock" - controller specific for Hi3620 mmc.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3620-clock.h>.
diff --git a/Bindings/clock/hi3660-clock.txt b/Bindings/clock/hi3660-clock.txt
new file mode 100644
index 0000000..946da7c
--- /dev/null
+++ b/Bindings/clock/hi3660-clock.txt
@@ -0,0 +1,47 @@
+* Hisilicon Hi3660 Clock Controller
+
+The Hi3660 clock controller generates and supplies clock to various
+controllers within the Hi3660 SoC.
+
+Required Properties:
+
+- compatible: the compatible should be one of the following strings to
+	indicate the clock controller functionality.
+
+	- "hisilicon,hi3660-crgctrl"
+	- "hisilicon,hi3660-pctrl"
+	- "hisilicon,hi3660-pmuctrl"
+	- "hisilicon,hi3660-sctrl"
+	- "hisilicon,hi3660-iomcu"
+	- "hisilicon,hi3660-stub-clk"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Optional Properties:
+
+- mboxes: Phandle to the mailbox for sending message to MCU.
+            (See: ../mailbox/hisilicon,hi3660-mailbox.txt for more info)
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3660-clock.h>.
+
+Examples:
+	crg_ctrl: clock-controller@fff35000 {
+		compatible = "hisilicon,hi3660-crgctrl", "syscon";
+		reg = <0x0 0xfff35000 0x0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	uart0: serial@fdf02000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x0 0xfdf02000 0x0 0x1000>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
+			 <&crg_ctrl HI3660_PCLK>;
+		clock-names = "uartclk", "apb_pclk";
+	};
diff --git a/Bindings/clock/hi3670-clock.txt b/Bindings/clock/hi3670-clock.txt
new file mode 100644
index 0000000..66f3697
--- /dev/null
+++ b/Bindings/clock/hi3670-clock.txt
@@ -0,0 +1,43 @@
+* Hisilicon Hi3670 Clock Controller
+
+The Hi3670 clock controller generates and supplies clock to various
+controllers within the Hi3670 SoC.
+
+Required Properties:
+
+- compatible: the compatible should be one of the following strings to
+	indicate the clock controller functionality.
+
+	- "hisilicon,hi3670-crgctrl"
+	- "hisilicon,hi3670-pctrl"
+	- "hisilicon,hi3670-pmuctrl"
+	- "hisilicon,hi3670-sctrl"
+	- "hisilicon,hi3670-iomcu"
+	- "hisilicon,hi3670-media1-crg"
+	- "hisilicon,hi3670-media2-crg"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3670-clock.h>.
+
+Examples:
+	crg_ctrl: clock-controller@fff35000 {
+		compatible = "hisilicon,hi3670-crgctrl", "syscon";
+		reg = <0x0 0xfff35000 0x0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	uart0: serial@fdf02000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x0 0xfdf02000 0x0 0x1000>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&crg_ctrl HI3670_CLK_GATE_UART0>,
+			 <&crg_ctrl HI3670_PCLK>;
+		clock-names = "uartclk", "apb_pclk";
+	};
diff --git a/Bindings/clock/hi6220-clock.txt b/Bindings/clock/hi6220-clock.txt
new file mode 100644
index 0000000..17ac4a3
--- /dev/null
+++ b/Bindings/clock/hi6220-clock.txt
@@ -0,0 +1,52 @@
+* Hisilicon Hi6220 Clock Controller
+
+Clock control registers reside in different Hi6220 system controllers,
+please refer the following document to know more about the binding rules
+for these system controllers:
+
+Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
+
+Required Properties:
+
+- compatible: the compatible should be one of the following strings to
+	indicate the clock controller functionality.
+
+	- "hisilicon,hi6220-acpu-sctrl"
+	- "hisilicon,hi6220-aoctrl"
+	- "hisilicon,hi6220-sysctrl"
+	- "hisilicon,hi6220-mediactrl"
+	- "hisilicon,hi6220-pmctrl"
+	- "hisilicon,hi6220-stub-clk"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Optional Properties:
+
+- hisilicon,hi6220-clk-sram: phandle to the syscon managing the SoC internal sram;
+  the driver need use the sram to pass parameters for frequency change.
+
+- mboxes: use the label reference for the mailbox as the first parameter, the
+  second parameter is the channel number.
+
+Example 1:
+	sys_ctrl: sys_ctrl@f7030000 {
+		compatible = "hisilicon,hi6220-sysctrl", "syscon";
+		reg = <0x0 0xf7030000 0x0 0x2000>;
+		#clock-cells = <1>;
+	};
+
+Example 2:
+	stub_clock: stub_clock {
+		compatible = "hisilicon,hi6220-stub-clk";
+		hisilicon,hi6220-clk-sram = <&sram>;
+		#clock-cells = <1>;
+		mboxes = <&mailbox 1>;
+	};
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi6220-clock.h>.
diff --git a/Bindings/clock/hisi-crg.txt b/Bindings/clock/hisi-crg.txt
new file mode 100644
index 0000000..cc60b3d
--- /dev/null
+++ b/Bindings/clock/hisi-crg.txt
@@ -0,0 +1,50 @@
+* HiSilicon Clock and Reset Generator(CRG)
+
+The CRG module provides clock and reset signals to various
+modules within the SoC.
+
+This binding uses the following bindings:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+    Documentation/devicetree/bindings/reset/reset.txt
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "hisilicon,hi3516cv300-crg"
+  - "hisilicon,hi3516cv300-sysctrl"
+  - "hisilicon,hi3519-crg"
+  - "hisilicon,hi3798cv200-crg"
+  - "hisilicon,hi3798cv200-sysctrl"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3519-clock.h>.
+
+- #reset-cells: should be 2.
+
+A reset signal can be controlled by writing a bit register in the CRG module.
+The reset specifier consists of two cells. The first cell represents the
+register offset relative to the base address. The second cell represents the
+bit index in the register.
+
+Example: CRG nodes
+CRG: clock-reset-controller@12010000 {
+	compatible = "hisilicon,hi3519-crg";
+	reg = <0x12010000 0x10000>;
+	#clock-cells = <1>;
+	#reset-cells = <2>;
+};
+
+Example: consumer nodes
+i2c0: i2c@12110000 {
+	compatible = "hisilicon,hi3519-i2c";
+	reg = <0x12110000 0x1000>;
+	clocks = <&CRG HI3519_I2C0_RST>;
+	resets = <&CRG 0xe4 0>;
+};
diff --git a/Bindings/clock/hisilicon,hi3559av100-clock.yaml b/Bindings/clock/hisilicon,hi3559av100-clock.yaml
new file mode 100644
index 0000000..3ceb29c
--- /dev/null
+++ b/Bindings/clock/hisilicon,hi3559av100-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/hisilicon,hi3559av100-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon SOC Clock for HI3559AV100
+
+maintainers:
+  - Dongjiu Geng <gengdongjiu@huawei.com>
+
+description: |
+  Hisilicon SOC clock control module which supports the clocks, resets and
+  power domains on HI3559AV100.
+
+  See also:
+    dt-bindings/clock/hi3559av100-clock.h
+
+properties:
+  compatible:
+    enum:
+      - hisilicon,hi3559av100-clock
+      - hisilicon,hi3559av100-shub-clock
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 2
+    description: |
+      First cell is reset request register offset.
+      Second cell is bit offset in reset request register.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@12010000 {
+            compatible = "hisilicon,hi3559av100-clock";
+            #clock-cells = <1>;
+            #reset-cells = <2>;
+            reg = <0x0 0x12010000 0x0 0x10000>;
+        };
+    };
+...
diff --git a/Bindings/clock/idt,versaclock5.yaml b/Bindings/clock/idt,versaclock5.yaml
new file mode 100644
index 0000000..a2c6eea
--- /dev/null
+++ b/Bindings/clock/idt,versaclock5.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/idt,versaclock5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT VersaClock 5 and 6 programmable I2C clock generators
+
+description: |
+  The IDT VersaClock 5 and VersaClock 6 are programmable I2C
+  clock generators providing from 3 to 12 output clocks.
+
+  When referencing the provided clock in the DT using phandle and clock
+  specifier, the following mapping applies:
+
+  - 5P49V5923:
+    0 -- OUT0_SEL_I2CB
+    1 -- OUT1
+    2 -- OUT2
+
+  - 5P49V5933:
+    0 -- OUT0_SEL_I2CB
+    1 -- OUT1
+    2 -- OUT4
+
+  - other parts:
+    0 -- OUT0_SEL_I2CB
+    1 -- OUT1
+    2 -- OUT2
+    3 -- OUT3
+    4 -- OUT4
+
+  The idt,shutdown and idt,output-enable-active properties control the
+  SH (en_global_shutdown) and SP bits of the Primary Source and Shutdown
+  Register, respectively. Their behavior is summarized by the following
+  table:
+
+  SH SP Output when the SD/OE pin is Low/High
+  == == =====================================
+   0  0 Active/Inactive
+   0  1 Inactive/Active
+   1  0 Active/Shutdown
+   1  1 Inactive/Shutdown
+
+  The case where SH and SP are both 1 is likely not very interesting.
+
+maintainers:
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - idt,5p49v5923
+      - idt,5p49v5925
+      - idt,5p49v5933
+      - idt,5p49v5935
+      - idt,5p49v60
+      - idt,5p49v6901
+      - idt,5p49v6965
+      - idt,5p49v6975
+
+  reg:
+    description: I2C device address
+    enum: [ 0x68, 0x6a ]
+
+  '#clock-cells':
+    const: 1
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum: [ xin, clkin ]
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  idt,xtal-load-femtofarads:
+    minimum: 9000
+    maximum: 22760
+    description: Optional load capacitor for XTAL1 and XTAL2
+
+  idt,shutdown:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      If 1, this enables the shutdown functionality: the chip will be
+      shut down if the SD/OE pin is driven high. If 0, this disables the
+      shutdown functionality: the chip will never be shut down based on
+      the value of the SD/OE pin. This property corresponds to the SH
+      bit of the Primary Source and Shutdown Register.
+
+  idt,output-enable-active:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      If 1, this enables output when the SD/OE pin is high, and disables
+      output when the SD/OE pin is low. If 0, this disables output when
+      the SD/OE pin is high, and enables output when the SD/OE pin is
+      low. This corresponds to the SP bit of the Primary Source and
+      Shutdown Register.
+
+patternProperties:
+  "^OUT[1-4]$":
+    type: object
+    description:
+      Description of one of the outputs (OUT1..OUT4). See "Clock1 Output
+      Configuration" in the Versaclock 5/6/6E Family Register Description
+      and Programming Guide.
+    properties:
+      idt,mode:
+        description:
+          The output drive mode. Values defined in dt-bindings/clock/versaclock.h
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 6
+      idt,voltage-microvolt:
+        description: The output drive voltage.
+        enum: [ 1800000, 2500000, 3300000 ]
+      idt,slew-percent:
+        description: The Slew rate control for CMOS single-ended.
+        enum: [ 80, 85, 90, 100 ]
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - idt,shutdown
+  - idt,output-enable-active
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - idt,5p49v5933
+            - idt,5p49v5935
+            - idt,5p49v6975
+    then:
+      # Devices with builtin crystal + optional external input
+      properties:
+        clock-names:
+          const: clkin
+        clocks:
+          maxItems: 1
+    else:
+      # Devices without builtin crystal
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/versaclock.h>
+
+    /* 25MHz reference crystal */
+    ref25: ref25m {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <25000000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* IDT 5P49V5923 I2C clock generator */
+        vc5: clock-generator@6a {
+            compatible = "idt,5p49v5923";
+            reg = <0x6a>;
+            #clock-cells = <1>;
+
+            /* Connect XIN input to 25MHz reference */
+            clocks = <&ref25m>;
+            clock-names = "xin";
+
+            /* Set the SD/OE pin's settings */
+            idt,shutdown = <0>;
+            idt,output-enable-active = <0>;
+
+            OUT1 {
+                idt,mode = <VC5_CMOSD>;
+                idt,voltage-microvolt = <1800000>;
+                idt,slew-percent = <80>;
+            };
+
+            OUT4 {
+                idt,mode = <VC5_LVDS>;
+            };
+        };
+    };
+
+...
diff --git a/Bindings/clock/img,boston-clock.txt b/Bindings/clock/img,boston-clock.txt
new file mode 100644
index 0000000..7bc5e9f
--- /dev/null
+++ b/Bindings/clock/img,boston-clock.txt
@@ -0,0 +1,31 @@
+Binding for Imagination Technologies MIPS Boston clock sources.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The device node must be a child node of the syscon node corresponding to the
+Boston system's platform registers.
+
+Required properties:
+- compatible : Should be "img,boston-clock".
+- #clock-cells : Should be set to 1.
+  Values available for clock consumers can be found in the header file:
+    <dt-bindings/clock/boston-clock.h>
+
+Example:
+
+	system-controller@17ffd000 {
+		compatible = "img,boston-platform-regs", "syscon";
+		reg = <0x17ffd000 0x1000>;
+
+		clk_boston: clock {
+			compatible = "img,boston-clock";
+			#clock-cells = <1>;
+		};
+	};
+
+	uart0: uart@17ffe000 {
+		/* ... */
+		clocks = <&clk_boston BOSTON_CLK_SYS>;
+	};
diff --git a/Bindings/clock/imx1-clock.yaml b/Bindings/clock/imx1-clock.yaml
new file mode 100644
index 0000000..7ade4c3
--- /dev/null
+++ b/Bindings/clock/imx1-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx1-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX1 CPUs Clock Controller
+
+maintainers:
+  - Alexander Shiyan <shc_work@mail.ru>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+  for the full list of i.MX1 clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx1-ccm
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx1-clock.h>
+
+    clock-controller@21b000 {
+        #clock-cells = <1>;
+        compatible = "fsl,imx1-ccm";
+        reg = <0x0021b000 0x1000>;
+    };
diff --git a/Bindings/clock/imx21-clock.yaml b/Bindings/clock/imx21-clock.yaml
new file mode 100644
index 0000000..79cc843
--- /dev/null
+++ b/Bindings/clock/imx21-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx21-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX21 Clock Controller
+
+maintainers:
+  - Alexander Shiyan <shc_work@mail.ru>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
+  for the full list of i.MX21 clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx21-ccm
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx21-clock.h>
+
+    clock-controller@10027000 {
+        compatible = "fsl,imx21-ccm";
+        reg = <0x10027000 0x800>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/imx23-clock.yaml b/Bindings/clock/imx23-clock.yaml
new file mode 100644
index 0000000..5e71c92
--- /dev/null
+++ b/Bindings/clock/imx23-clock.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx23-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX23 Clock Controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX23
+  clocks and IDs.
+
+        Clock		ID
+        ------------------
+        ref_xtal	0
+        pll		1
+        ref_cpu		2
+        ref_emi		3
+        ref_pix		4
+        ref_io		5
+        saif_sel	6
+        lcdif_sel	7
+        gpmi_sel	8
+        ssp_sel		9
+        emi_sel		10
+        cpu		11
+        etm_sel		12
+        cpu_pll		13
+        cpu_xtal	14
+        hbus		15
+        xbus		16
+        lcdif_div	17
+        ssp_div		18
+        gpmi_div	19
+        emi_pll		20
+        emi_xtal	21
+        etm_div		22
+        saif_div	23
+        clk32k_div	24
+        rtc		25
+        adc		26
+        spdif_div	27
+        clk32k		28
+        dri		29
+        pwm		30
+        filt		31
+        uart		32
+        ssp		33
+        gpmi		34
+        spdif		35
+        emi		36
+        saif		37
+        lcdif		38
+        etm		39
+        usb		40
+        usb_phy		41
+
+properties:
+  compatible:
+    const: fsl,imx23-clkctrl
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@80040000 {
+        compatible = "fsl,imx23-clkctrl";
+        reg = <0x80040000 0x2000>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/imx25-clock.yaml b/Bindings/clock/imx25-clock.yaml
new file mode 100644
index 0000000..c626a15
--- /dev/null
+++ b/Bindings/clock/imx25-clock.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx25-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX25 Clock Controller
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX25
+  clocks and IDs.
+
+        Clock			ID
+        --------------------------
+        dummy			0
+        osc			1
+        mpll			2
+        upll			3
+        mpll_cpu_3_4		4
+        cpu_sel			5
+        cpu			6
+        ahb			7
+        usb_div			8
+        ipg			9
+        per0_sel		10
+        per1_sel		11
+        per2_sel		12
+        per3_sel		13
+        per4_sel		14
+        per5_sel		15
+        per6_sel		16
+        per7_sel		17
+        per8_sel		18
+        per9_sel		19
+        per10_sel		20
+        per11_sel		21
+        per12_sel		22
+        per13_sel		23
+        per14_sel		24
+        per15_sel		25
+        per0			26
+        per1			27
+        per2			28
+        per3			29
+        per4			30
+        per5			31
+        per6			32
+        per7			33
+        per8			34
+        per9			35
+        per10			36
+        per11			37
+        per12			38
+        per13			39
+        per14			40
+        per15			41
+        csi_ipg_per		42
+        epit_ipg_per		43
+        esai_ipg_per		44
+        esdhc1_ipg_per		45
+        esdhc2_ipg_per		46
+        gpt_ipg_per		47
+        i2c_ipg_per		48
+        lcdc_ipg_per		49
+        nfc_ipg_per		50
+        owire_ipg_per		51
+        pwm_ipg_per		52
+        sim1_ipg_per		53
+        sim2_ipg_per		54
+        ssi1_ipg_per		55
+        ssi2_ipg_per		56
+        uart_ipg_per		57
+        ata_ahb			58
+        reserved		59
+        csi_ahb			60
+        emi_ahb			61
+        esai_ahb		62
+        esdhc1_ahb		63
+        esdhc2_ahb		64
+        fec_ahb			65
+        lcdc_ahb		66
+        rtic_ahb		67
+        sdma_ahb		68
+        slcdc_ahb		69
+        usbotg_ahb		70
+        reserved		71
+        reserved		72
+        reserved		73
+        reserved		74
+        can1_ipg		75
+        can2_ipg		76
+        csi_ipg			77
+        cspi1_ipg		78
+        cspi2_ipg		79
+        cspi3_ipg		80
+        dryice_ipg		81
+        ect_ipg			82
+        epit1_ipg		83
+        epit2_ipg		84
+        reserved		85
+        esdhc1_ipg		86
+        esdhc2_ipg		87
+        fec_ipg			88
+        reserved		89
+        reserved		90
+        reserved		91
+        gpt1_ipg		92
+        gpt2_ipg		93
+        gpt3_ipg		94
+        gpt4_ipg		95
+        reserved		96
+        reserved		97
+        reserved		98
+        iim_ipg			99
+        reserved		100
+        reserved		101
+        kpp_ipg			102
+        lcdc_ipg		103
+        reserved		104
+        pwm1_ipg		105
+        pwm2_ipg		106
+        pwm3_ipg		107
+        pwm4_ipg		108
+        rngb_ipg		109
+        reserved		110
+        scc_ipg			111
+        sdma_ipg		112
+        sim1_ipg		113
+        sim2_ipg		114
+        slcdc_ipg		115
+        spba_ipg		116
+        ssi1_ipg		117
+        ssi2_ipg		118
+        tsc_ipg			119
+        uart1_ipg		120
+        uart2_ipg		121
+        uart3_ipg		122
+        uart4_ipg		123
+        uart5_ipg		124
+        reserved		125
+        wdt_ipg			126
+        cko_div			127
+        cko_sel			128
+        cko			129
+
+properties:
+  compatible:
+    const: fsl,imx25-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@53f80000 {
+        compatible = "fsl,imx25-ccm";
+        reg = <0x53f80000 0x4000>;
+        interrupts = <31>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/imx27-clock.yaml b/Bindings/clock/imx27-clock.yaml
new file mode 100644
index 0000000..71d78a0
--- /dev/null
+++ b/Bindings/clock/imx27-clock.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx27-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX27 Clock Controller
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
+  for the full list of i.MX27 clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx27-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx27-clock.h>
+
+    clock-controller@10027000 {
+        compatible = "fsl,imx27-ccm";
+        reg = <0x10027000 0x1000>;
+        interrupts = <31>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/imx28-clock.yaml b/Bindings/clock/imx28-clock.yaml
new file mode 100644
index 0000000..4aaad7b
--- /dev/null
+++ b/Bindings/clock/imx28-clock.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx28-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX28 Clock Controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX28
+  clocks and IDs.
+
+        Clock		ID
+        ------------------
+        ref_xtal	0
+        pll0		1
+        pll1		2
+        pll2		3
+        ref_cpu		4
+        ref_emi		5
+        ref_io0		6
+        ref_io1		7
+        ref_pix		8
+        ref_hsadc	9
+        ref_gpmi	10
+        saif0_sel	11
+        saif1_sel	12
+        gpmi_sel	13
+        ssp0_sel	14
+        ssp1_sel	15
+        ssp2_sel	16
+        ssp3_sel	17
+        emi_sel		18
+        etm_sel		19
+        lcdif_sel	20
+        cpu		21
+        ptp_sel		22
+        cpu_pll		23
+        cpu_xtal	24
+        hbus		25
+        xbus		26
+        ssp0_div	27
+        ssp1_div	28
+        ssp2_div	29
+        ssp3_div	30
+        gpmi_div	31
+        emi_pll		32
+        emi_xtal	33
+        lcdif_div	34
+        etm_div		35
+        ptp		36
+        saif0_div	37
+        saif1_div	38
+        clk32k_div	39
+        rtc		40
+        lradc		41
+        spdif_div	42
+        clk32k		43
+        pwm		44
+        uart		45
+        ssp0		46
+        ssp1		47
+        ssp2		48
+        ssp3		49
+        gpmi		50
+        spdif		51
+        emi		52
+        saif0		53
+        saif1		54
+        lcdif		55
+        etm		56
+        fec		57
+        can0		58
+        can1		59
+        usb0		60
+        usb1		61
+        usb0_phy	62
+        usb1_phy	63
+        enet_out	64
+
+properties:
+  compatible:
+    const: fsl,imx28-clkctrl
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@80040000 {
+        compatible = "fsl,imx28-clkctrl";
+        reg = <0x80040000 0x2000>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/imx31-clock.yaml b/Bindings/clock/imx31-clock.yaml
new file mode 100644
index 0000000..50a8498
--- /dev/null
+++ b/Bindings/clock/imx31-clock.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx31-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX31 Clock Controller
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX31
+  clocks and IDs.
+
+        Clock		    ID
+        -----------------------
+        dummy	             0
+        ckih                 1
+        ckil                 2
+        mpll                 3
+        spll                 4
+        upll                 5
+        mcu_main             6
+        hsp                  7
+        ahb                  8
+        nfc                  9
+        ipg                  10
+        per_div              11
+        per                  12
+        csi_sel              13
+        fir_sel              14
+        csi_div              15
+        usb_div_pre          16
+        usb_div_post         17
+        fir_div_pre          18
+        fir_div_post         19
+        sdhc1_gate           20
+        sdhc2_gate           21
+        gpt_gate             22
+        epit1_gate           23
+        epit2_gate           24
+        iim_gate             25
+        ata_gate             26
+        sdma_gate            27
+        cspi3_gate           28
+        rng_gate             29
+        uart1_gate           30
+        uart2_gate           31
+        ssi1_gate            32
+        i2c1_gate            33
+        i2c2_gate            34
+        i2c3_gate            35
+        hantro_gate          36
+        mstick1_gate         37
+        mstick2_gate         38
+        csi_gate             39
+        rtc_gate             40
+        wdog_gate            41
+        pwm_gate             42
+        sim_gate             43
+        ect_gate             44
+        usb_gate             45
+        kpp_gate             46
+        ipu_gate             47
+        uart3_gate           48
+        uart4_gate           49
+        uart5_gate           50
+        owire_gate           51
+        ssi2_gate            52
+        cspi1_gate           53
+        cspi2_gate           54
+        gacc_gate            55
+        emi_gate             56
+        rtic_gate            57
+        firi_gate            58
+
+properties:
+  compatible:
+    const: fsl,imx31-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for DVFS when a frequency change is requested, request 2 is
+      to generate interrupt for DPTC when a voltage change is requested.
+    items:
+      - description: CCM DVFS interrupt request 1
+      - description: CCM DPTC interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@53f80000 {
+        compatible = "fsl,imx31-ccm";
+        reg = <0x53f80000 0x4000>;
+        interrupts = <31>, <53>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/imx35-clock.yaml b/Bindings/clock/imx35-clock.yaml
new file mode 100644
index 0000000..c063369
--- /dev/null
+++ b/Bindings/clock/imx35-clock.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx35-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX35 Clock Controller
+
+maintainers:
+  - Steffen Trumtrar <s.trumtrar@pengutronix.de>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX35
+  clocks and IDs.
+
+        Clock			ID
+        ---------------------------
+        ckih			0
+        mpll			1
+        ppll			2
+        mpll_075		3
+        arm			4
+        hsp			5
+        hsp_div			6
+        hsp_sel			7
+        ahb			8
+        ipg			9
+        arm_per_div		10
+        ahb_per_div		11
+        ipg_per			12
+        uart_sel		13
+        uart_div		14
+        esdhc_sel		15
+        esdhc1_div		16
+        esdhc2_div		17
+        esdhc3_div		18
+        spdif_sel		19
+        spdif_div_pre		20
+        spdif_div_post		21
+        ssi_sel			22
+        ssi1_div_pre		23
+        ssi1_div_post		24
+        ssi2_div_pre		25
+        ssi2_div_post		26
+        usb_sel			27
+        usb_div			28
+        nfc_div			29
+        asrc_gate		30
+        pata_gate		31
+        audmux_gate		32
+        can1_gate		33
+        can2_gate		34
+        cspi1_gate		35
+        cspi2_gate		36
+        ect_gate		37
+        edio_gate		38
+        emi_gate		39
+        epit1_gate		40
+        epit2_gate		41
+        esai_gate		42
+        esdhc1_gate		43
+        esdhc2_gate		44
+        esdhc3_gate		45
+        fec_gate		46
+        gpio1_gate		47
+        gpio2_gate		48
+        gpio3_gate		49
+        gpt_gate		50
+        i2c1_gate		51
+        i2c2_gate		52
+        i2c3_gate		53
+        iomuxc_gate		54
+        ipu_gate		55
+        kpp_gate		56
+        mlb_gate		57
+        mshc_gate		58
+        owire_gate		59
+        pwm_gate		60
+        rngc_gate		61
+        rtc_gate		62
+        rtic_gate		63
+        scc_gate		64
+        sdma_gate		65
+        spba_gate		66
+        spdif_gate		67
+        ssi1_gate		68
+        ssi2_gate		69
+        uart1_gate		70
+        uart2_gate		71
+        uart3_gate		72
+        usbotg_gate		73
+        wdog_gate		74
+        max_gate		75
+        admux_gate		76
+        csi_gate		77
+        csi_div			78
+        csi_sel			79
+        iim_gate		80
+        gpu2d_gate		81
+        ckli_gate		82
+
+properties:
+  compatible:
+    const: fsl,imx35-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@53f80000 {
+        compatible = "fsl,imx35-ccm";
+        reg = <0x53f80000 0x4000>;
+        interrupts = <31>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/imx5-clock.yaml b/Bindings/clock/imx5-clock.yaml
new file mode 100644
index 0000000..423c014
--- /dev/null
+++ b/Bindings/clock/imx5-clock.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx5-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX5 Clock Controller
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
+  for the full list of i.MX5 clock IDs.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx53-ccm
+      - fsl,imx51-ccm
+      - fsl,imx50-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@53fd4000{
+        compatible = "fsl,imx53-ccm";
+        reg = <0x53fd4000 0x4000>;
+        interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 72 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/imx6q-clock.yaml b/Bindings/clock/imx6q-clock.yaml
new file mode 100644
index 0000000..bae4fcb
--- /dev/null
+++ b/Bindings/clock/imx6q-clock.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6q-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 Quad Clock Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6q-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 24m osc
+      - description: 32k osc
+      - description: ckih1 clock input
+      - description: anaclk1 clock input
+      - description: anaclk2 clock input
+
+  clock-names:
+    items:
+      - const: osc
+      - const: ckil
+      - const: ckih1
+      - const: anaclk1
+      - const: anaclk2
+
+  fsl,pmic-stby-poweroff:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Use this property if the SoC should be powered off by external power
+      management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+      Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+      be using "syscon-poweroff" driver instead.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6q-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/imx6sl-clock.yaml b/Bindings/clock/imx6sl-clock.yaml
new file mode 100644
index 0000000..c85ff6e
--- /dev/null
+++ b/Bindings/clock/imx6sl-clock.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sl-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 SoloLite Clock Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6sl-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6sl-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/imx6sll-clock.yaml b/Bindings/clock/imx6sll-clock.yaml
new file mode 100644
index 0000000..6b549ed
--- /dev/null
+++ b/Bindings/clock/imx6sll-clock.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sll-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 SLL Clock Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6sll-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ipp_di0 clock input
+      - description: ipp_di1 clock input
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc
+      - const: ipp_di0
+      - const: ipp_di1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6sll-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+        clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+    };
diff --git a/Bindings/clock/imx6sx-clock.yaml b/Bindings/clock/imx6sx-clock.yaml
new file mode 100644
index 0000000..55dcad1
--- /dev/null
+++ b/Bindings/clock/imx6sx-clock.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sx-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 SoloX Clock Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6sx-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ipp_di0 clock input
+      - description: ipp_di1 clock input
+      - description: anaclk1 clock input
+      - description: anaclk2 clock input
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc
+      - const: ipp_di0
+      - const: ipp_di1
+      - const: anaclk1
+      - const: anaclk2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6sx-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>;
+        clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2";
+    };
diff --git a/Bindings/clock/imx6ul-clock.yaml b/Bindings/clock/imx6ul-clock.yaml
new file mode 100644
index 0000000..be54d4d
--- /dev/null
+++ b/Bindings/clock/imx6ul-clock.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6ul-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 UltraLite Clock Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6ul-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ipp_di0 clock input
+      - description: ipp_di1 clock input
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc
+      - const: ipp_di0
+      - const: ipp_di1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6ul-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+        clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+    };
diff --git a/Bindings/clock/imx7d-clock.yaml b/Bindings/clock/imx7d-clock.yaml
new file mode 100644
index 0000000..e7d8427
--- /dev/null
+++ b/Bindings/clock/imx7d-clock.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx7d-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7 Dual Clock Controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h
+  for the full list of i.MX7 Dual clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx7d-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@30380000 {
+        compatible = "fsl,imx7d-ccm";
+        reg = <0x30380000 0x10000>;
+        interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc>;
+        clock-names = "ckil", "osc";
+    };
diff --git a/Bindings/clock/imx7ulp-pcc-clock.yaml b/Bindings/clock/imx7ulp-pcc-clock.yaml
new file mode 100644
index 0000000..7684203
--- /dev/null
+++ b/Bindings/clock/imx7ulp-pcc-clock.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx7ulp-pcc-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7ULP Peripheral Clock Control (PCC) modules Clock Controller
+
+maintainers:
+  - A.s. Dong <aisheng.dong@nxp.com>
+
+description: |
+  i.MX7ULP Clock functions are under joint control of the System
+  Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
+  modules, and Core Mode Controller (CMC)1 blocks
+
+  The clocking scheme provides clear separation between M4 domain
+  and A7 domain. Except for a few clock sources shared between two
+  domains, such as the System Oscillator clock, the Slow IRC (SIRC),
+  and and the Fast IRC clock (FIRCLK), clock sources and clock
+  management are separated and contained within each domain.
+
+  M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
+  A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.
+
+  Note: this binding doc is only for A7 clock domain.
+
+  The Peripheral Clock Control (PCC) is responsible for clock selection,
+  optional division and clock gating mode for peripherals in their
+  respected power domain.
+
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell.
+  See include/dt-bindings/clock/imx7ulp-clock.h for the full list of
+  i.MX7ULP clock IDs of each module.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx7ulp-pcc2
+      - fsl,imx7ulp-pcc3
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: nic1 bus clock
+      - description: nic1 clock
+      - description: ddr clock
+      - description: apll pfd2
+      - description: apll pfd1
+      - description: apll pfd0
+      - description: usb pll
+      - description: system osc bus clock
+      - description: fast internal reference clock bus
+      - description: rtc osc
+      - description: system pll bus clock
+
+  clock-names:
+    items:
+      - const: nic1_bus_clk
+      - const: nic1_clk
+      - const: ddr_clk
+      - const: apll_pfd2
+      - const: apll_pfd1
+      - const: apll_pfd0
+      - const: upll
+      - const: sosc_bus_clk
+      - const: firc_bus_clk
+      - const: rosc
+      - const: spll_bus_clk
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@403f0000 {
+        compatible = "fsl,imx7ulp-pcc2";
+        reg = <0x403f0000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+                 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
+                 <&scg1 IMX7ULP_CLK_DDR_DIV>,
+                 <&scg1 IMX7ULP_CLK_APLL_PFD2>,
+                 <&scg1 IMX7ULP_CLK_APLL_PFD1>,
+                 <&scg1 IMX7ULP_CLK_APLL_PFD0>,
+                 <&scg1 IMX7ULP_CLK_UPLL>,
+                 <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
+                 <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
+                 <&scg1 IMX7ULP_CLK_ROSC>,
+                 <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
+         clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
+                       "apll_pfd2", "apll_pfd1", "apll_pfd0",
+                       "upll", "sosc_bus_clk", "firc_bus_clk",
+                       "rosc", "spll_bus_clk";
+    };
diff --git a/Bindings/clock/imx7ulp-scg-clock.yaml b/Bindings/clock/imx7ulp-scg-clock.yaml
new file mode 100644
index 0000000..5e25bc6
--- /dev/null
+++ b/Bindings/clock/imx7ulp-scg-clock.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx7ulp-scg-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7ULP System Clock Generation (SCG) modules Clock Controller
+
+maintainers:
+  - A.s. Dong <aisheng.dong@nxp.com>
+
+description: |
+  i.MX7ULP Clock functions are under joint control of the System
+  Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
+  modules, and Core Mode Controller (CMC)1 blocks
+
+  The clocking scheme provides clear separation between M4 domain
+  and A7 domain. Except for a few clock sources shared between two
+  domains, such as the System Oscillator clock, the Slow IRC (SIRC),
+  and and the Fast IRC clock (FIRCLK), clock sources and clock
+  management are separated and contained within each domain.
+
+  M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
+  A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.
+
+  Note: this binding doc is only for A7 clock domain.
+
+  The System Clock Generation (SCG) is responsible for clock generation
+  and distribution across this device. Functions performed by the SCG
+  include: clock reference selection, generation of clock used to derive
+  processor, system, peripheral bus and external memory interface clocks,
+  source selection for peripheral clocks and control of power saving
+  clock gating mode.
+
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell.
+  See include/dt-bindings/clock/imx7ulp-clock.h for the full list of
+  i.MX7ULP clock IDs of each module.
+
+properties:
+  compatible:
+    const: fsl,imx7ulp-scg1
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: rtc osc
+      - description: system osc
+      - description: slow internal reference clock
+      - description: fast internal reference clock
+      - description: usb PLL
+
+  clock-names:
+    items:
+      - const: rosc
+      - const: sosc
+      - const: sirc
+      - const: firc
+      - const: upll
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@403e0000 {
+        compatible = "fsl,imx7ulp-scg1";
+        reg = <0x403e0000 0x10000>;
+        clocks = <&rosc>, <&sosc>, <&sirc>,
+                 <&firc>, <&upll>;
+        clock-names = "rosc", "sosc", "sirc",
+                      "firc", "upll";
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/imx8m-clock.yaml b/Bindings/clock/imx8m-clock.yaml
new file mode 100644
index 0000000..80539f8
--- /dev/null
+++ b/Bindings/clock/imx8m-clock.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8m-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Family Clock Control Module
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  NXP i.MX8M Mini/Nano/Plus/Quad clock control module is an integrated clock
+  controller, which generates and supplies to all modules.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mm-ccm
+      - fsl,imx8mn-ccm
+      - fsl,imx8mp-ccm
+      - fsl,imx8mq-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  clocks:
+    minItems: 6
+    maxItems: 7
+
+  clock-names:
+    minItems: 6
+    maxItems: 7
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8m-clock.h
+      for the full list of i.MX8M clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mq-ccm
+    then:
+      properties:
+        clocks:
+          items:
+            - description: 32k osc
+            - description: 25m osc
+            - description: 27m osc
+            - description: ext1 clock input
+            - description: ext2 clock input
+            - description: ext3 clock input
+            - description: ext4 clock input
+        clock-names:
+          items:
+            - const: ckil
+            - const: osc_25m
+            - const: osc_27m
+            - const: clk_ext1
+            - const: clk_ext2
+            - const: clk_ext3
+            - const: clk_ext4
+    else:
+      properties:
+        clocks:
+          items:
+            - description: 32k osc
+            - description: 24m osc
+            - description: ext1 clock input
+            - description: ext2 clock input
+            - description: ext3 clock input
+            - description: ext4 clock input
+
+        clock-names:
+          items:
+            - const: osc_32k
+            - const: osc_24m
+            - const: clk_ext1
+            - const: clk_ext2
+            - const: clk_ext3
+            - const: clk_ext4
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    clock-controller@30380000 {
+        compatible = "fsl,imx8mm-ccm";
+        reg = <0x30380000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+                 <&clk_ext3>, <&clk_ext4>;
+        clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+                      "clk_ext3", "clk_ext4";
+    };
+
+  - |
+    clock-controller@30380000 {
+        compatible = "fsl,imx8mq-ccm";
+        reg = <0x30380000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc_25m>, <&osc_27m>, <&clk_ext1>,
+                 <&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
+        clock-names = "ckil", "osc_25m", "osc_27m", "clk_ext1",
+                      "clk_ext2", "clk_ext3", "clk_ext4";
+    };
+
+...
diff --git a/Bindings/clock/imx8mp-audiomix.yaml b/Bindings/clock/imx8mp-audiomix.yaml
new file mode 100644
index 0000000..0a6dc1a
--- /dev/null
+++ b/Bindings/clock/imx8mp-audiomix.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8mp-audiomix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP AudioMIX Block Control
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  NXP i.MX8M Plus AudioMIX is dedicated clock muxing and gating IP
+  used to control Audio related clock on the SoC.
+
+properties:
+  compatible:
+    const: fsl,imx8mp-audio-blk-ctrl
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 7
+    maxItems: 7
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: sai1
+      - const: sai2
+      - const: sai3
+      - const: sai5
+      - const: sai6
+      - const: sai7
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mp-clock.h
+      for the full list of i.MX8MP IMX8MP_CLK_AUDIOMIX_ clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    clock-controller@30e20000 {
+        compatible = "fsl,imx8mp-audio-blk-ctrl";
+        reg = <0x30e20000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
+                 <&clk IMX8MP_CLK_SAI1>,
+                 <&clk IMX8MP_CLK_SAI2>,
+                 <&clk IMX8MP_CLK_SAI3>,
+                 <&clk IMX8MP_CLK_SAI5>,
+                 <&clk IMX8MP_CLK_SAI6>,
+                 <&clk IMX8MP_CLK_SAI7>;
+        clock-names = "ahb",
+                      "sai1", "sai2", "sai3",
+                      "sai5", "sai6", "sai7";
+        power-domains = <&pgc_audio>;
+    };
+
+...
diff --git a/Bindings/clock/imx8qxp-lpcg.yaml b/Bindings/clock/imx8qxp-lpcg.yaml
new file mode 100644
index 0000000..b207f95
--- /dev/null
+++ b/Bindings/clock/imx8qxp-lpcg.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8qxp-lpcg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock
+
+maintainers:
+  - Aisheng Dong <aisheng.dong@nxp.com>
+
+description: |
+  The Low-Power Clock Gate (LPCG) modules contain a local programming
+  model to control the clock gates for the peripherals. An LPCG module
+  is used to locally gate the clocks for the associated peripheral.
+
+  This level of clock gating is provided after the clocks are generated
+  by the SCU resources and clock controls. Thus even if the clock is
+  enabled by these control bits, it might still not be running based
+  on the base resource.
+
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See the full list of clock IDs from:
+  include/dt-bindings/clock/imx8-lpcg.h
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx8qxp-lpcg
+      - items:
+          - enum:
+              - fsl,imx8qm-lpcg
+          - const: fsl,imx8qxp-lpcg
+      - enum:
+          - fsl,imx8qxp-lpcg-adma
+          - fsl,imx8qxp-lpcg-conn
+          - fsl,imx8qxp-lpcg-dc
+          - fsl,imx8qxp-lpcg-dsp
+          - fsl,imx8qxp-lpcg-gpu
+          - fsl,imx8qxp-lpcg-hsio
+          - fsl,imx8qxp-lpcg-img
+          - fsl,imx8qxp-lpcg-lsio
+          - fsl,imx8qxp-lpcg-vpu
+        deprecated: true
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    description: |
+      Input parent clocks phandle array for each clock
+    minItems: 1
+    maxItems: 8
+
+  clock-indices:
+    description: |
+      An integer array indicating the bit offset for each clock.
+      Refer to <include/dt-bindings/clock/imx8-lpcg.h> for the
+      supported LPCG clock indices.
+    minItems: 1
+    maxItems: 8
+
+  clock-output-names:
+    description: |
+      Shall be the corresponding names of the outputs.
+      NOTE this property must be specified in the same order
+      as the clock-indices property.
+    minItems: 1
+    maxItems: 8
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sdhc0_lpcg: clock-controller@5b200000 {
+        compatible = "fsl,imx8qxp-lpcg";
+        reg = <0x5b200000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&sdhc0_clk IMX_SC_PM_CLK_PER>,
+                 <&conn_ipg_clk>,
+                 <&conn_axi_clk>;
+        clock-indices = <IMX_LPCG_CLK_0>,
+                        <IMX_LPCG_CLK_4>,
+                        <IMX_LPCG_CLK_5>;
+        clock-output-names = "sdhc0_lpcg_per_clk",
+                             "sdhc0_lpcg_ipg_clk",
+                             "sdhc0_lpcg_ahb_clk";
+        power-domains = <&pd IMX_SC_R_SDHC_0>;
+    };
diff --git a/Bindings/clock/imx8ulp-cgc-clock.yaml b/Bindings/clock/imx8ulp-cgc-clock.yaml
new file mode 100644
index 0000000..68a60cd
--- /dev/null
+++ b/Bindings/clock/imx8ulp-cgc-clock.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8ulp-cgc-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8ULP Clock Generation & Control(CGC) Module
+
+maintainers:
+  - Jacky Bai <ping.bai@nxp.com>
+
+description: |
+  On i.MX8ULP, The clock sources generation, distribution and management is
+  under the control of several CGCs & PCCs modules. The CGC modules generate
+  and distribute clocks on the device.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8ulp-cgc1
+      - fsl,imx8ulp-cgc2
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Generation & Control Module node:
+  - |
+    clock-controller@292c0000 {
+        compatible = "fsl,imx8ulp-cgc1";
+        reg = <0x292c0000 0x10000>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/imx8ulp-pcc-clock.yaml b/Bindings/clock/imx8ulp-pcc-clock.yaml
new file mode 100644
index 0000000..d0b0792
--- /dev/null
+++ b/Bindings/clock/imx8ulp-pcc-clock.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8ulp-pcc-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8ULP Peripheral Clock Controller(PCC) Module
+
+maintainers:
+  - Jacky Bai <ping.bai@nxp.com>
+
+description: |
+  On i.MX8ULP, The clock sources generation, distribution and management is
+  under the control of several CGCs & PCCs modules. The PCC modules control
+  software reset, clock selection, optional division and clock gating mode
+  for peripherals.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8ulp-pcc3
+      - fsl,imx8ulp-pcc4
+      - fsl,imx8ulp-pcc5
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  # Peripheral Clock Control Module node:
+  - |
+    clock-controller@292d0000 {
+        compatible = "fsl,imx8ulp-pcc3";
+        reg = <0x292d0000 0x10000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/imx93-clock.yaml b/Bindings/clock/imx93-clock.yaml
new file mode 100644
index 0000000..ccb53c6
--- /dev/null
+++ b/Bindings/clock/imx93-clock.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx93-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 Clock Control Module
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  i.MX93 clock control module is an integrated clock controller, which
+  includes clock generator, clock gate and supplies to all modules.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx93-ccm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      specify the external clocks used by the CCM module.
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ext1 clock input
+
+  clock-names:
+    description:
+      specify the external clocks names used by the CCM module.
+    items:
+      - const: osc_32k
+      - const: osc_24m
+      - const: clk_ext1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See include/dt-bindings/clock/imx93-clock.h for the full list of
+      i.MX93 clock IDs.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    clock-controller@44450000 {
+        compatible = "fsl,imx93-ccm";
+        reg = <0x44450000 0x10000>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/imxrt1050-clock.yaml b/Bindings/clock/imxrt1050-clock.yaml
new file mode 100644
index 0000000..777af4a
--- /dev/null
+++ b/Bindings/clock/imxrt1050-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imxrt1050-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MXRT Clock Controller
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+  - Jesse Taube <Mr.Bossman075@gmail.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imxrt*-clock.h
+  for the full list of i.MXRT clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imxrt1050-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  clocks:
+    description: 24m osc
+    maxItems: 1
+
+  clock-names:
+    const: osc
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imxrt1050-clock.h>
+
+    clks: clock-controller@400fc000 {
+        compatible = "fsl,imxrt1050-ccm";
+        reg = <0x400fc000 0x4000>;
+        interrupts = <95>, <96>;
+        clocks = <&osc>;
+        clock-names = "osc";
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/ingenic,cgu.yaml b/Bindings/clock/ingenic,cgu.yaml
new file mode 100644
index 0000000..509df06
--- /dev/null
+++ b/Bindings/clock/ingenic,cgu.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ingenic,cgu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs CGU
+
+description: |
+  The CGU in an Ingenic SoC provides all the clocks generated on-chip. It
+  typically includes a variety of PLLs, multiplexers, dividers & gates in order
+  to provide many different clock signals derived from only 2 external source
+  clocks.
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ingenic,jz4740-cgu
+          - ingenic,jz4725b-cgu
+          - ingenic,jz4755-cgu
+          - ingenic,jz4760-cgu
+          - ingenic,jz4760b-cgu
+          - ingenic,jz4770-cgu
+          - ingenic,jz4780-cgu
+          - ingenic,x1000-cgu
+          - ingenic,x1830-cgu
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^clock-controller@[0-9a-f]+$"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  "#clock-cells":
+    const: 1
+
+  ranges: true
+
+  compatible:
+    items:
+      - enum:
+          - ingenic,jz4740-cgu
+          - ingenic,jz4725b-cgu
+          - ingenic,jz4755-cgu
+          - ingenic,jz4760-cgu
+          - ingenic,jz4760b-cgu
+          - ingenic,jz4770-cgu
+          - ingenic,jz4780-cgu
+          - ingenic,x1000-cgu
+          - ingenic,x1830-cgu
+      - const: simple-mfd
+    minItems: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: External oscillator clock
+      - description: Internal 32 kHz RTC clock
+
+  clock-names:
+    items:
+      - const: ext
+      - enum:
+          - rtc
+          - osc32k # Different name, same clock
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 64
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 64
+
+  assigned-clock-rates:
+    minItems: 1
+    maxItems: 64
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+patternProperties:
+  "^usb-phy@[a-f0-9]+$":
+    $ref: /schemas/phy/ingenic,phy-usb.yaml#
+  "^mac-phy-ctrl@[a-f0-9]+$":
+    $ref: /schemas/net/ingenic,mac.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
+    cgu: clock-controller@10000000 {
+      compatible = "ingenic,jz4770-cgu", "simple-mfd";
+      reg = <0x10000000 0x100>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0x0 0x10000000 0x100>;
+
+      clocks = <&ext>, <&osc32k>;
+      clock-names = "ext", "osc32k";
+
+      #clock-cells = <1>;
+
+      otg_phy: usb-phy@3c {
+        compatible = "ingenic,jz4770-phy";
+        reg = <0x3c 0x10>;
+
+        clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+
+        vcc-supply = <&ldo5>;
+
+        #phy-cells = <0>;
+      };
+    };
diff --git a/Bindings/clock/intel,agilex.yaml b/Bindings/clock/intel,agilex.yaml
new file mode 100644
index 0000000..3745ba8
--- /dev/null
+++ b/Bindings/clock/intel,agilex.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,agilex.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA Agilex platform clock controller
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+description:
+  The Intel Agilex Clock controller is an integrated clock controller, which
+  generates and supplies to all modules.
+
+properties:
+  compatible:
+    const: intel,agilex-clkmgr
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock controller node:
+  - |
+    clkmgr: clock-controller@ffd10000 {
+      compatible = "intel,agilex-clkmgr";
+      reg = <0xffd10000 0x1000>;
+      clocks = <&osc1>;
+      #clock-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/intel,agilex5-clkmgr.yaml b/Bindings/clock/intel,agilex5-clkmgr.yaml
new file mode 100644
index 0000000..d120b0d
--- /dev/null
+++ b/Bindings/clock/intel,agilex5-clkmgr.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,agilex5-clkmgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA Agilex5 clock manager
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+description:
+  The Intel Agilex5 Clock Manager is an integrated clock controller, which
+  generates and supplies clock to all the modules.
+
+properties:
+  compatible:
+    const: intel,agilex5-clkmgr
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clkmgr: clock-controller@10d10000 {
+      compatible = "intel,agilex5-clkmgr";
+      reg = <0x10d10000 0x1000>;
+      #clock-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/intel,cgu-lgm.yaml b/Bindings/clock/intel,cgu-lgm.yaml
new file mode 100644
index 0000000..76609a3
--- /dev/null
+++ b/Bindings/clock/intel,cgu-lgm.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,cgu-lgm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain SoC's Clock Controller(CGU)
+
+maintainers:
+  - Rahul Tanwar <rahul.tanwar@linux.intel.com>
+
+description: |
+  Lightning Mountain(LGM) SoC's Clock Generation Unit(CGU) driver provides
+  all means to access the CGU hardware module in order to generate a series
+  of clocks for the whole system and individual peripherals.
+
+  Please refer to include/dt-bindings/clock/intel,lgm-clk.h header file, it
+  defines all available clocks as macros. These macros can be used in device
+  tree sources.
+
+properties:
+  compatible:
+    const: intel,cgu-lgm
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    cgu: clock-controller@e0200000 {
+        compatible = "intel,cgu-lgm";
+        reg = <0xe0200000 0x33c>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/intel,easic-n5x.yaml b/Bindings/clock/intel,easic-n5x.yaml
new file mode 100644
index 0000000..e000116
--- /dev/null
+++ b/Bindings/clock/intel,easic-n5x.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,easic-n5x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA eASIC N5X platform clock controller
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+description:
+  The Intel eASIC N5X Clock controller is an integrated clock controller, which
+  generates and supplies to all modules.
+
+properties:
+  compatible:
+    const: intel,easic-n5x-clkmgr
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock controller node:
+  - |
+    clkmgr: clock-controller@ffd10000 {
+      compatible = "intel,easic-n5x-clkmgr";
+      reg = <0xffd10000 0x1000>;
+      clocks = <&osc1>;
+      #clock-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/intel,stratix10.yaml b/Bindings/clock/intel,stratix10.yaml
new file mode 100644
index 0000000..b4a8be2
--- /dev/null
+++ b/Bindings/clock/intel,stratix10.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,stratix10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA Stratix10 platform clock controller
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  compatible:
+    const: intel,stratix10-clkmgr
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@ffd10000 {
+        compatible = "intel,stratix10-clkmgr";
+        reg = <0xffd10000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/keystone-gate.txt b/Bindings/clock/keystone-gate.txt
new file mode 100644
index 0000000..c5aa187
--- /dev/null
+++ b/Bindings/clock/keystone-gate.txt
@@ -0,0 +1,29 @@
+Status: Unstable - ABI compatibility may be broken in the future
+
+Binding for Keystone gate control driver which uses PSC controller IP.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,keystone,psc-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : parent clock phandle
+- reg :	psc control and domain address address space
+- reg-names : psc control and domain registers
+- domain-id : psc domain id needed to check the transition state register
+
+Optional properties:
+- clock-output-names : From common clock binding to override the
+			default output clock name
+Example:
+	clkusb: clkusb {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "usb";
+		reg = <0x02350008 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
diff --git a/Bindings/clock/keystone-pll.txt b/Bindings/clock/keystone-pll.txt
new file mode 100644
index 0000000..9a3fbc6
--- /dev/null
+++ b/Bindings/clock/keystone-pll.txt
@@ -0,0 +1,84 @@
+Status: Unstable - ABI compatibility may be broken in the future
+
+Binding for keystone PLLs. The main PLL IP typically has a multiplier,
+a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL
+and PAPLL are controlled by the memory mapped register where as the Main
+PLL is controlled by a PLL controller registers along with memory mapped
+registers.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock"
+- clocks : parent clock phandle
+- reg - pll control0 and pll multiplier registers
+- reg-names : control, multiplier and post-divider. The multiplier and
+		post-divider registers are applicable only for main pll clock
+- fixed-postdiv : fixed post divider value. If absent, use clkod register bits
+		for postdiv
+
+Example:
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclksys>;
+		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+		reg-names = "control", "multiplier", "post-divider";
+		fixed-postdiv = <2>;
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkpass>;
+		clock-output-names = "pa-pll-clk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+	};
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,pll-mux-clock"
+- clocks : link phandles of parent clocks
+- reg - pll mux register
+- bit-shift : number of bits to shift the bit-mask
+- bit-mask : arbitrary bitmask for programming the mux
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	mainmuxclk: mainmuxclk@2310108 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-mux-clock";
+		clocks = <&mainpllclk>, <&refclkmain>;
+		reg = <0x02310108 4>;
+		bit-shift = <23>;
+		bit-mask = <1>;
+		clock-output-names = "mainmuxclk";
+	};
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,pll-divider-clock"
+- clocks : parent clock phandle
+- reg - pll mux register
+- bit-shift : number of bits to shift the bit-mask
+- bit-mask : arbitrary bitmask for programming the divider
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	gemtraceclk: gemtraceclk@2310120 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-divider-clock";
+		clocks = <&mainmuxclk>;
+		reg = <0x02310120 4>;
+		bit-shift = <0>;
+		bit-mask = <8>;
+		clock-output-names = "gemtraceclk";
+	};
diff --git a/Bindings/clock/loongson,ls1x-clk.yaml b/Bindings/clock/loongson,ls1x-clk.yaml
new file mode 100644
index 0000000..01561a0
--- /dev/null
+++ b/Bindings/clock/loongson,ls1x-clk.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/loongson,ls1x-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 Clock Controller
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls1b-clk
+      - loongson,ls1c-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clkc: clock-controller@1fe78030 {
+        compatible = "loongson,ls1b-clk";
+        reg = <0x1fe78030 0x8>;
+
+        clocks = <&xtal>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/loongson,ls2k-clk.yaml b/Bindings/clock/loongson,ls2k-clk.yaml
new file mode 100644
index 0000000..63a5901
--- /dev/null
+++ b/Bindings/clock/loongson,ls2k-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/loongson,ls2k-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 SoC Clock Control Module
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+description: |
+  Loongson-2 SoC clock control module is an integrated clock controller, which
+  generates and supplies to all modules.
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls2k-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: 100m ref
+
+  clock-names:
+    items:
+      - const: ref_100m
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/loongson,ls2k-clk.h
+      for the full list of Loongson-2 SoC clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ref_100m: clock-ref-100m {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <100000000>;
+        clock-output-names = "ref_100m";
+    };
+
+    clk: clock-controller@1fe00480 {
+        compatible = "loongson,ls2k-clk";
+        reg = <0x1fe00480 0x58>;
+        #clock-cells = <1>;
+        clocks = <&ref_100m>;
+        clock-names = "ref_100m";
+    };
diff --git a/Bindings/clock/lpc1850-ccu.txt b/Bindings/clock/lpc1850-ccu.txt
new file mode 100644
index 0000000..8cf8f0e
--- /dev/null
+++ b/Bindings/clock/lpc1850-ccu.txt
@@ -0,0 +1,77 @@
+* NXP LPC1850 Clock Control Unit (CCU)
+
+Each CGU base clock has several clock branches which can be turned on
+or off independently by the Clock Control Units CCU1 or CCU2. The
+branch clocks are distributed between CCU1 and CCU2.
+
+ - Above text taken from NXP LPC1850 User Manual.
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible:
+	Should be "nxp,lpc1850-ccu"
+- reg:
+	Shall define the base and range of the address space
+	containing clock control registers
+- #clock-cells:
+	Shall have value <1>.  The permitted clock-specifier values
+	are the branch clock names defined in table below.
+- clocks:
+	Shall contain a list of phandles for the base clocks routed
+	from the CGU to the specific CCU. See mapping of base clocks
+	and CCU in table below.
+- clock-names:
+	Shall contain a list of names for the base clock routed
+	from the CGU to the specific CCU. Valid CCU clock names:
+	"base_usb0_clk",  "base_periph_clk", "base_usb1_clk",
+	"base_cpu_clk",   "base_spifi_clk",  "base_spi_clk",
+	"base_apb1_clk",  "base_apb3_clk",   "base_adchs_clk",
+	"base_sdio_clk",  "base_ssp0_clk",   "base_ssp1_clk",
+	"base_uart0_clk", "base_uart1_clk",  "base_uart2_clk",
+	"base_uart3_clk", "base_audio_clk"
+
+Which branch clocks that are available on the CCU depends on the
+specific LPC part. Check the user manual for your specific part.
+
+A list of CCU clocks can be found in dt-bindings/clock/lpc18xx-ccu.h.
+
+Example board file:
+
+soc {
+	ccu1: clock-controller@40051000 {
+		compatible = "nxp,lpc1850-ccu";
+		reg = <0x40051000 0x1000>;
+		#clock-cells = <1>;
+		clocks = <&cgu BASE_APB3_CLK>,   <&cgu BASE_APB1_CLK>,
+			 <&cgu BASE_SPIFI_CLK>,  <&cgu BASE_CPU_CLK>,
+			 <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>,
+			 <&cgu BASE_USB1_CLK>,   <&cgu BASE_SPI_CLK>;
+		clock-names = "base_apb3_clk",   "base_apb1_clk",
+			      "base_spifi_clk",  "base_cpu_clk",
+			      "base_periph_clk", "base_usb0_clk",
+			      "base_usb1_clk",   "base_spi_clk";
+	};
+
+	ccu2: clock-controller@40052000 {
+		compatible = "nxp,lpc1850-ccu";
+		reg = <0x40052000 0x1000>;
+		#clock-cells = <1>;
+		clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>,
+			 <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>,
+			 <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>,
+			 <&cgu BASE_SSP0_CLK>,  <&cgu BASE_SDIO_CLK>;
+		clock-names = "base_audio_clk", "base_uart3_clk",
+			      "base_uart2_clk", "base_uart1_clk",
+			      "base_uart0_clk", "base_ssp1_clk",
+			      "base_ssp0_clk",  "base_sdio_clk";
+	};
+
+	/* A user of CCU branch clocks */
+	uart1: serial@40082000 {
+		...
+		clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
+		...
+	};
+};
diff --git a/Bindings/clock/lpc1850-cgu.txt b/Bindings/clock/lpc1850-cgu.txt
new file mode 100644
index 0000000..2cc32a9
--- /dev/null
+++ b/Bindings/clock/lpc1850-cgu.txt
@@ -0,0 +1,131 @@
+* NXP LPC1850 Clock Generation Unit (CGU)
+
+The CGU generates multiple independent clocks for the core and the
+peripheral blocks of the LPC18xx. Each independent clock is called
+a base clock and itself is one of the inputs to the two Clock
+Control Units (CCUs) which control the branch clocks to the
+individual peripherals.
+
+The CGU selects the inputs to the clock generators from multiple
+clock sources, controls the clock generation, and routes the outputs
+of the clock generators through the clock source bus to the output
+stages. Each output stage provides an independent clock source and
+corresponds to one of the base clocks for the LPC18xx.
+
+ - Above text taken from NXP LPC1850 User Manual.
+
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible:
+	Should be "nxp,lpc1850-cgu"
+- reg:
+	Shall define the base and range of the address space
+	containing clock control registers
+- #clock-cells:
+	Shall have value <1>.  The permitted clock-specifier values
+	are the base clock numbers defined below.
+- clocks:
+	Shall contain a list of phandles for the external input
+	sources to the CGU. The list shall be in the following
+	order: xtal, 32khz, enet_rx_clk, enet_tx_clk, gp_clkin.
+- clock-indices:
+	Shall be an ordered list of numbers defining the base clock
+	number provided by the CGU.
+- clock-output-names:
+	Shall be an ordered list of strings defining the names of
+	the clocks provided by the CGU.
+
+Which base clocks that are available on the CGU depends on the
+specific LPC part. Base clocks are numbered from 0 to 27.
+
+Number:		Name:			Description:
+ 0		BASE_SAFE_CLK		Base safe clock (always on) for WWDT
+ 1		BASE_USB0_CLK		Base clock for USB0
+ 2		BASE_PERIPH_CLK		Base clock for Cortex-M0SUB subsystem,
+					SPI, and SGPIO
+ 3		BASE_USB1_CLK		Base clock for USB1
+ 4		BASE_CPU_CLK		System base clock for ARM Cortex-M core
+					and APB peripheral blocks #0 and #2
+ 5		BASE_SPIFI_CLK		Base clock for SPIFI
+ 6		BASE_SPI_CLK		Base clock for SPI
+ 7		BASE_PHY_RX_CLK		Base clock for Ethernet PHY Receive clock
+ 8		BASE_PHY_TX_CLK		Base clock for Ethernet PHY Transmit clock
+ 9		BASE_APB1_CLK		Base clock for APB peripheral block # 1
+10		BASE_APB3_CLK		Base clock for APB peripheral block # 3
+11		BASE_LCD_CLK		Base clock for LCD
+12		BASE_ADCHS_CLK		Base clock for ADCHS
+13		BASE_SDIO_CLK		Base clock for SD/MMC
+14		BASE_SSP0_CLK		Base clock for SSP0
+15		BASE_SSP1_CLK		Base clock for SSP1
+16		BASE_UART0_CLK		Base clock for UART0
+17		BASE_UART1_CLK		Base clock for UART1
+18		BASE_UART2_CLK		Base clock for UART2
+19		BASE_UART3_CLK		Base clock for UART3
+20		BASE_OUT_CLK		Base clock for CLKOUT pin
+24-21		-			Reserved
+25		BASE_AUDIO_CLK		Base clock for audio system (I2S)
+26 		BASE_CGU_OUT0_CLK	Base clock for CGU_OUT0 clock output
+27 		BASE_CGU_OUT1_CLK	Base clock for CGU_OUT1 clock output
+
+BASE_PERIPH_CLK and BASE_SPI_CLK is only available on LPC43xx.
+BASE_ADCHS_CLK is only available on LPC4370.
+
+
+Example board file:
+
+/ {
+	clocks {
+		xtal: xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <12000000>;
+		};
+
+		xtal32: xtal32 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		enet_rx_clk: enet_rx_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "enet_rx_clk";
+		};
+
+		enet_tx_clk: enet_tx_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "enet_tx_clk";
+		};
+
+		gp_clkin: gp_clkin {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "gp_clkin";
+		};
+	};
+
+	soc {
+		cgu: clock-controller@40050000 {
+			compatible = "nxp,lpc1850-cgu";
+			reg = <0x40050000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>;
+		};
+
+		/* A CGU and CCU clock consumer */
+		lcdc: lcdc@40008000 {
+			...
+			clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
+			clock-names = "clcdclk", "apb_pclk";
+			...
+		};
+	};
+};
diff --git a/Bindings/clock/lpc1850-creg-clk.txt b/Bindings/clock/lpc1850-creg-clk.txt
new file mode 100644
index 0000000..b6b2547
--- /dev/null
+++ b/Bindings/clock/lpc1850-creg-clk.txt
@@ -0,0 +1,52 @@
+* NXP LPC1850 CREG clocks
+
+The NXP LPC18xx/43xx CREG (Configuration Registers) block contains
+control registers for two low speed clocks. One of the clocks is a
+32 kHz oscillator driver with power up/down and clock gating. Next
+is a fixed divider that creates a 1 kHz clock from the 32 kHz osc.
+
+These clocks are used by the RTC and the Event Router peripherals.
+The 32 kHz can also be routed to other peripherals to enable low
+power modes.
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible:
+	Should be "nxp,lpc1850-creg-clk"
+- #clock-cells:
+	Shall have value <1>.
+- clocks:
+	Shall contain a phandle to the fixed 32 kHz crystal.
+
+The creg-clk node must be a child of the creg syscon node.
+
+The following clocks are available from the clock node.
+
+Clock ID	Name
+   0		 1 kHz clock
+   1		32 kHz Oscillator
+
+Example:
+soc {
+	creg: syscon@40043000 {
+		compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
+		reg = <0x40043000 0x1000>;
+
+		creg_clk: clock-controller {
+			compatible = "nxp,lpc1850-creg-clk";
+			clocks = <&xtal32>;
+			#clock-cells = <1>;
+		};
+
+		...
+	};
+
+	rtc: rtc@40046000 {
+		...
+		clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
+		clock-names = "rtc", "reg";
+		...
+	};
+};
diff --git a/Bindings/clock/lsi,axm5516-clks.txt b/Bindings/clock/lsi,axm5516-clks.txt
new file mode 100644
index 0000000..3ce97cf
--- /dev/null
+++ b/Bindings/clock/lsi,axm5516-clks.txt
@@ -0,0 +1,29 @@
+AXM5516 clock driver bindings
+-----------------------------
+
+Required properties :
+- compatible : shall contain "lsi,axm5516-clks"
+- reg : shall contain base register location and length
+- #clock-cells : shall contain 1
+
+The consumer specifies the desired clock by having the clock ID in its "clocks"
+phandle cell. See <dt-bindings/clock/lsi,axxia-clock.h> for the list of
+supported clock IDs.
+
+Example:
+
+	clks: clock-controller@2010020000 {
+		compatible = "lsi,axm5516-clks";
+		#clock-cells = <1>;
+		reg = <0x20 0x10020000 0 0x20000>;
+	};
+
+	serial0: uart@2010080000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x20 0x10080000 0 0x1000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks AXXIA_CLK_PER>;
+		clock-names = "apb_pclk";
+	};
+																																};
+
diff --git a/Bindings/clock/marvell,armada-3700-uart-clock.yaml b/Bindings/clock/marvell,armada-3700-uart-clock.yaml
new file mode 100644
index 0000000..175f5c8
--- /dev/null
+++ b/Bindings/clock/marvell,armada-3700-uart-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,armada-3700-uart-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Marvell Armada 3720 UART clocks
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+
+properties:
+  compatible:
+    const: marvell,armada-3700-uart-clock
+
+  reg:
+    items:
+      - description: UART Clock Control Register
+      - description: UART 2 Baud Rate Divisor Register
+
+  clocks:
+    description: |
+      List of parent clocks suitable for UART from following set:
+        "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal"
+      UART clock can use one from this set and when more are provided
+      then kernel would choose and configure the most suitable one.
+      It is suggest to specify at least one TBG clock to achieve
+      baudrates above 230400 and also to specify clock which bootloader
+      used for UART (most probably xtal) for smooth boot log on UART.
+
+  clock-names:
+    items:
+      - const: TBG-A-P
+      - const: TBG-B-P
+      - const: TBG-A-S
+      - const: TBG-B-S
+      - const: xtal
+    minItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    uartclk: clock-controller@12010 {
+      compatible = "marvell,armada-3700-uart-clock";
+      reg = <0x12010 0x4>, <0x12210 0x4>;
+      clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>, <&xtalclk>;
+      clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal";
+      #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/marvell,berlin.txt b/Bindings/clock/marvell,berlin.txt
new file mode 100644
index 0000000..c611c49
--- /dev/null
+++ b/Bindings/clock/marvell,berlin.txt
@@ -0,0 +1,31 @@
+Device Tree Clock bindings for Marvell Berlin
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Clock related registers are spread among the chip control registers. Berlin
+clock node should be a sub-node of the chip controller node. Marvell Berlin2
+(BG2, BG2CD, BG2Q) SoCs share the same IP for PLLs and clocks, with some
+minor differences in features and register layout.
+
+Required properties:
+- compatible: must be "marvell,berlin2-clk" or "marvell,berlin2q-clk"
+- #clock-cells: must be 1
+- clocks: must be the input parent clock phandle
+- clock-names: name of the input parent clock
+	Allowed clock-names for the reference clocks are
+	"refclk" for the SoCs oscillator input on all SoCs,
+	and SoC-specific input clocks for
+	BG2/BG2CD: "video_ext0" for the external video clock input
+
+
+Example:
+
+chip_clk: clock {
+	compatible = "marvell,berlin2q-clk";
+
+	#clock-cells = <1>;
+	clocks = <&refclk>;
+	clock-names = "refclk";
+};
diff --git a/Bindings/clock/marvell,mmp2-audio-clock.yaml b/Bindings/clock/marvell,mmp2-audio-clock.yaml
new file mode 100644
index 0000000..dffa734
--- /dev/null
+++ b/Bindings/clock/marvell,mmp2-audio-clock.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,mmp2-audio-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP2 Audio Clock Controller
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+description: |
+  The audio clock controller generates and supplies the clocks to the audio
+  codec.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify the clock which they consume.
+
+  All these identifiers could be found in
+  <dt-bindings/clock/marvell,mmp2-audio.h>.
+
+properties:
+  compatible:
+    enum:
+      - marvell,mmp2-audio-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Audio subsystem clock
+      - description: The crystal oscillator clock
+      - description: First I2S clock
+      - description: Second I2S clock
+
+  clock-names:
+    items:
+      - const: audio
+      - const: vctcxo
+      - const: i2s0
+      - const: i2s1
+
+  '#clock-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/marvell,mmp2-audio.h>
+    #include <dt-bindings/clock/marvell,mmp2.h>
+    #include <dt-bindings/power/marvell,mmp2.h>
+
+    clock-controller@d42a0c30 {
+      compatible = "marvell,mmp2-audio-clock";
+      reg = <0xd42a0c30 0x10>;
+      clock-names = "audio", "vctcxo", "i2s0", "i2s1";
+      clocks = <&soc_clocks MMP2_CLK_AUDIO>,
+               <&soc_clocks MMP2_CLK_VCTCXO>,
+               <&soc_clocks MMP2_CLK_I2S0>,
+               <&soc_clocks MMP2_CLK_I2S1>;
+      power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
+      #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/marvell,mmp2-clock.yaml b/Bindings/clock/marvell,mmp2-clock.yaml
new file mode 100644
index 0000000..d68f0d1
--- /dev/null
+++ b/Bindings/clock/marvell,mmp2-clock.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,mmp2-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP2 and MMP3 Clock Controller
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+description: |
+  The clock subsystem on MMP2 or MMP3 generates and supplies clock to various
+  controllers within the SoC.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify the clock which they consume.
+
+  All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>.
+
+properties:
+  compatible:
+    enum:
+      - marvell,mmp2-clock # controller compatible with MMP2 SoC
+      - marvell,mmp3-clock # controller compatible with MMP3 SoC
+
+  reg:
+    items:
+      - description: MPMU register region
+      - description: APMU register region
+      - description: APBC register region
+
+  reg-names:
+    items:
+      - const: mpmu
+      - const: apmu
+      - const: apbc
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@d4050000 {
+      compatible = "marvell,mmp2-clock";
+      reg = <0xd4050000 0x1000>,
+            <0xd4282800 0x400>,
+            <0xd4015000 0x1000>;
+      reg-names = "mpmu", "apmu", "apbc";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
diff --git a/Bindings/clock/marvell,pxa168.txt b/Bindings/clock/marvell,pxa168.txt
new file mode 100644
index 0000000..c62eb1d
--- /dev/null
+++ b/Bindings/clock/marvell,pxa168.txt
@@ -0,0 +1,21 @@
+* Marvell PXA168 Clock Controller
+
+The PXA168 clock subsystem generates and supplies clock to various
+controllers within the PXA168 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "marvell,pxa168-clock" - controller compatible with PXA168 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+  region. There are 3 places in SOC has clock control logic:
+  "mpmu", "apmu", "apbc". So three reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell,pxa168.h>.
diff --git a/Bindings/clock/marvell,pxa1928.txt b/Bindings/clock/marvell,pxa1928.txt
new file mode 100644
index 0000000..809c5a2
--- /dev/null
+++ b/Bindings/clock/marvell,pxa1928.txt
@@ -0,0 +1,21 @@
+* Marvell PXA1928 Clock Controllers
+
+The PXA1928 clock subsystem generates and supplies clock to various
+controllers within the PXA1928 SoC. The PXA1928 contains 3 clock controller
+blocks called APMU, MPMU, and APBC roughly corresponding to internal buses.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "marvell,pxa1928-apmu" - APMU controller compatible
+  - "marvell,pxa1928-mpmu" - MPMU controller compatible
+  - "marvell,pxa1928-apbc" - APBC controller compatible
+- reg: physical base address of the clock controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use the clock controller
+phandle and this identifier to specify the clock which they consume.
+
+All these identifiers can be found in <dt-bindings/clock/marvell,pxa1928.h>.
diff --git a/Bindings/clock/marvell,pxa910.txt b/Bindings/clock/marvell,pxa910.txt
new file mode 100644
index 0000000..d9f41f3
--- /dev/null
+++ b/Bindings/clock/marvell,pxa910.txt
@@ -0,0 +1,21 @@
+* Marvell PXA910 Clock Controller
+
+The PXA910 clock subsystem generates and supplies clock to various
+controllers within the PXA910 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "marvell,pxa910-clock" - controller compatible with PXA910 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+  region. There are 4 places in SOC has clock control logic:
+  "mpmu", "apmu", "apbc", "apbcp". So four reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell-pxa910.h>.
diff --git a/Bindings/clock/maxim,max77686.txt b/Bindings/clock/maxim,max77686.txt
new file mode 100644
index 0000000..c10849e
--- /dev/null
+++ b/Bindings/clock/maxim,max77686.txt
@@ -0,0 +1,114 @@
+Binding for Maxim MAX77686/MAX77802/MAX77620 32k clock generator block
+
+This is a part of device tree bindings of MAX77686/MAX77802/MAX77620
+multi-function device. More information can be found in MFD DT binding
+doc as follows:
+	bindings/mfd/max77686.txt for MAX77686 and
+	bindings/mfd/max77802.txt for MAX77802 and
+	bindings/mfd/max77620.txt for MAX77620.
+
+The MAX77686 contains three 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
+dt-bindings/clock/maxim,max77686.h.
+
+
+The MAX77802 contains two 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
+dt-bindings/clock/maxim,max77802.h.
+
+The MAX77686 contains one 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
+dt-bindings/clock/maxim,max77620.h.
+
+Following properties should be presend in main device node of the MFD chip.
+
+Required properties:
+
+- #clock-cells: from common clock binding; shall be set to 1.
+
+Optional properties:
+- clock-output-names: From common clock binding.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Following indices are allowed:
+    - 0: 32khz_ap clock (max77686, max77802), 32khz_out0 (max77620)
+    - 1: 32khz_cp clock (max77686, max77802),
+    - 2: 32khz_pmic clock (max77686).
+
+Clocks are defined as preprocessor macros in above dt-binding header for
+respective chips.
+
+Example:
+
+1. With MAX77686:
+
+#include <dt-bindings/clock/maxim,max77686.h>
+/* ... */
+
+	Node of the MFD chip
+		max77686: max77686@9 {
+			compatible = "maxim,max77686";
+			interrupt-parent = <&wakeup_eint>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+			reg = <0x09>;
+			#clock-cells = <1>;
+
+			/* ... */
+		};
+
+	Clock consumer node
+
+		foo@0 {
+			compatible = "bar,foo";
+			/* ... */
+			clock-names = "my-clock";
+			clocks = <&max77686 MAX77686_CLK_PMIC>;
+		};
+
+2. With MAX77802:
+
+#include <dt-bindings/clock/maxim,max77802.h>
+/* ... */
+
+	Node of the MFD chip
+		max77802: max77802@9 {
+			compatible = "maxim,max77802";
+			interrupt-parent = <&wakeup_eint>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+			reg = <0x09>;
+			#clock-cells = <1>;
+
+			/* ... */
+		};
+
+	Clock consumer node
+
+		foo@0 {
+			compatible = "bar,foo";
+			/* ... */
+			clock-names = "my-clock";
+			clocks = <&max77802 MAX77802_CLK_32K_AP>;
+		};
+
+
+3. With MAX77620:
+
+#include <dt-bindings/clock/maxim,max77620.h>
+/* ... */
+
+	Node of the MFD chip
+		max77620: max77620@3c {
+			compatible = "maxim,max77620";
+			reg = <0x3c>;
+			#clock-cells = <1>;
+			/* ... */
+		};
+
+	Clock consumer node
+
+		foo@0 {
+			compatible = "bar,foo";
+			/* ... */
+			clock-names = "my-clock";
+			clocks = <&max77620 MAX77620_CLK_32K_OUT0>;
+		};
diff --git a/Bindings/clock/maxim,max9485.txt b/Bindings/clock/maxim,max9485.txt
new file mode 100644
index 0000000..b8f5c3b
--- /dev/null
+++ b/Bindings/clock/maxim,max9485.txt
@@ -0,0 +1,59 @@
+Devicetree bindings for Maxim MAX9485 Programmable Audio Clock Generator
+
+This device exposes 4 clocks in total:
+
+- MAX9485_MCLKOUT: 	A gated, buffered output of the input clock of 27 MHz
+- MAX9485_CLKOUT:	A PLL that can be configured to 16 different discrete
+			frequencies
+- MAX9485_CLKOUT[1,2]:	Two gated outputs for MAX9485_CLKOUT
+
+MAX9485_CLKOUT[1,2] are children of MAX9485_CLKOUT which upchain all rate set
+requests.
+
+Required properties:
+- compatible:	"maxim,max9485"
+- clocks:	Input clock, must provide 27.000 MHz
+- clock-names:	Must be set to "xclk"
+- #clock-cells: From common clock binding; shall be set to 1
+
+Optional properties:
+- reset-gpios:		GPIO descriptor connected to the #RESET input pin
+- vdd-supply:		A regulator node for Vdd
+- clock-output-names:	Name of output clocks, as defined in common clock
+			bindings
+
+If not explicitly set, the output names are "mclkout", "clkout", "clkout1"
+and "clkout2".
+
+Clocks are defined as preprocessor macros in the dt-binding header.
+
+Example:
+
+	#include <dt-bindings/clock/maxim,max9485.h>
+
+	xo-27mhz: xo-27mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	&i2c0 {
+		max9485: audio-clock@63 {
+			reg = <0x63>;
+			compatible = "maxim,max9485";
+			clock-names = "xclk";
+			clocks = <&xo-27mhz>;
+			reset-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+			vdd-supply = <&3v3-reg>;
+			#clock-cells = <1>;
+		};
+	};
+
+	// Clock consumer node
+
+	foo@0 {
+		compatible = "bar,foo";
+		/* ... */
+		clock-names = "foo-input-clk";
+		clocks = <&max9485 MAX9485_CLKOUT1>;
+	};
diff --git a/Bindings/clock/mediatek,apmixedsys.yaml b/Bindings/clock/mediatek,apmixedsys.yaml
new file mode 100644
index 0000000..372c1d7
--- /dev/null
+++ b/Bindings/clock/mediatek,apmixedsys.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,apmixedsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek AP Mixedsys Controller
+
+maintainers:
+  - Michael Turquette <mturquette@baylibre.com>
+  - Stephen Boyd <sboyd@kernel.org>
+
+description:
+  The Mediatek apmixedsys controller provides PLLs to the system.
+  The clock values can be found in <dt-bindings/clock/mt*-clk.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6797-apmixedsys
+          - mediatek,mt7622-apmixedsys
+          - mediatek,mt7981-apmixedsys
+          - mediatek,mt7986-apmixedsys
+          - mediatek,mt8135-apmixedsys
+          - mediatek,mt8173-apmixedsys
+          - mediatek,mt8516-apmixedsys
+      - items:
+          - const: mediatek,mt7623-apmixedsys
+          - const: mediatek,mt2701-apmixedsys
+          - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt2701-apmixedsys
+              - mediatek,mt2712-apmixedsys
+              - mediatek,mt6765-apmixedsys
+              - mediatek,mt6779-apmixedsys
+              - mediatek,mt6795-apmixedsys
+              - mediatek,mt7629-apmixedsys
+              - mediatek,mt8167-apmixedsys
+              - mediatek,mt8183-apmixedsys
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    apmixedsys: clock-controller@10209000 {
+        compatible = "mediatek,mt8173-apmixedsys";
+        reg = <0x10209000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/mediatek,mt6795-clock.yaml b/Bindings/clock/mediatek,mt6795-clock.yaml
new file mode 100644
index 0000000..04469ea
--- /dev/null
+++ b/Bindings/clock/mediatek,mt6795-clock.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt6795-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT6795
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6795-mfgcfg
+      - mediatek,mt6795-vdecsys
+      - mediatek,mt6795-vencsys
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mfgcfg: clock-controller@13000000 {
+            compatible = "mediatek,mt6795-mfgcfg";
+            reg = <0 0x13000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+
+        vdecsys: clock-controller@16000000 {
+            compatible = "mediatek,mt6795-vdecsys";
+            reg = <0 0x16000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+
+        vencsys: clock-controller@18000000 {
+            compatible = "mediatek,mt6795-vencsys";
+            reg = <0 0x18000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
diff --git a/Bindings/clock/mediatek,mt6795-sys-clock.yaml b/Bindings/clock/mediatek,mt6795-sys-clock.yaml
new file mode 100644
index 0000000..378b761
--- /dev/null
+++ b/Bindings/clock/mediatek,mt6795-sys-clock.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt6795-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT6795
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description:
+  The Mediatek system clock controller provides various clocks and system
+  configuration like reset and bus protection on MT6795.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt6795-apmixedsys
+          - mediatek,mt6795-infracfg
+          - mediatek,mt6795-pericfg
+          - mediatek,mt6795-topckgen
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        topckgen: clock-controller@10000000 {
+            compatible = "mediatek,mt6795-topckgen", "syscon";
+            reg = <0 0x10000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
diff --git a/Bindings/clock/mediatek,mt7621-sysc.yaml b/Bindings/clock/mediatek,mt7621-sysc.yaml
new file mode 100644
index 0000000..b42f0f5
--- /dev/null
+++ b/Bindings/clock/mediatek,mt7621-sysc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7621-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT7621 Clock
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  The MT7621 has a PLL controller from where the cpu clock is provided
+  as well as derived clocks for the bus and the peripherals. It also
+  can gate SoC device clocks.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify the clock which they consume.
+
+  All these identifiers could be found in:
+  [1]: <include/dt-bindings/clock/mt7621-clk.h>.
+
+  The clocks are provided inside a system controller node.
+
+  This node is also a reset provider for all the peripherals.
+
+  Reset related bits are defined in:
+  [2]: <include/dt-bindings/reset/mt7621-reset.h>.
+
+properties:
+  compatible:
+    items:
+      - const: mediatek,mt7621-sysc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    description:
+      The first cell indicates the clock number, see [1] for available
+      clocks.
+    const: 1
+
+  "#reset-cells":
+    description:
+      The first cell indicates the reset bit within the register, see
+      [2] for available resets.
+    const: 1
+
+  ralink,memctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of syscon used to control memory registers
+
+  clock-output-names:
+    maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - ralink,memctl
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7621-clk.h>
+
+    sysc: sysc@0 {
+      compatible = "mediatek,mt7621-sysc", "syscon";
+      reg = <0x0 0x100>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      ralink,memctl = <&memc>;
+      clock-output-names = "xtal", "cpu", "bus",
+                           "50m", "125m", "150m",
+                           "250m", "270m";
+    };
diff --git a/Bindings/clock/mediatek,mt8186-fhctl.yaml b/Bindings/clock/mediatek,mt8186-fhctl.yaml
new file mode 100644
index 0000000..d00327d
--- /dev/null
+++ b/Bindings/clock/mediatek,mt8186-fhctl.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8186-fhctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek frequency hopping and spread spectrum clocking control
+
+maintainers:
+  - Edward-JW Yang <edward-jw.yang@mediatek.com>
+
+description: |
+  Frequency hopping control (FHCTL) is a piece of hardware that control
+  some PLLs to adopt "hopping" mechanism to adjust their frequency.
+  Spread spectrum clocking (SSC) is another function provided by this hardware.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6795-fhctl
+      - mediatek,mt8173-fhctl
+      - mediatek,mt8186-fhctl
+      - mediatek,mt8192-fhctl
+      - mediatek,mt8195-fhctl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Phandles of the PLL with FHCTL hardware capability.
+    minItems: 1
+    maxItems: 30
+
+  mediatek,hopping-ssc-percent:
+    description: The percentage of spread spectrum clocking for one PLL.
+    minItems: 1
+    maxItems: 30
+    items:
+      default: 0
+      minimum: 0
+      maximum: 8
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8186-clk.h>
+    fhctl: fhctl@1000ce00 {
+        compatible = "mediatek,mt8186-fhctl";
+        reg = <0x1000ce00 0x200>;
+        clocks = <&apmixedsys CLK_APMIXED_MSDCPLL>;
+        mediatek,hopping-ssc-percent = <3>;
+    };
diff --git a/Bindings/clock/mediatek,mt8188-clock.yaml b/Bindings/clock/mediatek,mt8188-clock.yaml
new file mode 100644
index 0000000..d7214d9
--- /dev/null
+++ b/Bindings/clock/mediatek,mt8188-clock.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8188-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8188
+
+maintainers:
+  - Garmin Chang <garmin.chang@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8188-adsp-audio26m
+      - mediatek,mt8188-camsys
+      - mediatek,mt8188-camsys-rawa
+      - mediatek,mt8188-camsys-rawb
+      - mediatek,mt8188-camsys-yuva
+      - mediatek,mt8188-camsys-yuvb
+      - mediatek,mt8188-ccusys
+      - mediatek,mt8188-imgsys
+      - mediatek,mt8188-imgsys-wpe1
+      - mediatek,mt8188-imgsys-wpe2
+      - mediatek,mt8188-imgsys-wpe3
+      - mediatek,mt8188-imgsys1-dip-nr
+      - mediatek,mt8188-imgsys1-dip-top
+      - mediatek,mt8188-imp-iic-wrap-c
+      - mediatek,mt8188-imp-iic-wrap-en
+      - mediatek,mt8188-imp-iic-wrap-w
+      - mediatek,mt8188-ipesys
+      - mediatek,mt8188-mfgcfg
+      - mediatek,mt8188-vdecsys
+      - mediatek,mt8188-vdecsys-soc
+      - mediatek,mt8188-vencsys
+      - mediatek,mt8188-vppsys0
+      - mediatek,mt8188-vppsys1
+      - mediatek,mt8188-wpesys
+      - mediatek,mt8188-wpesys-vpp0
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@11283000 {
+        compatible = "mediatek,mt8188-imp-iic-wrap-c";
+        reg = <0x11283000 0x1000>;
+        #clock-cells = <1>;
+    };
+
diff --git a/Bindings/clock/mediatek,mt8188-sys-clock.yaml b/Bindings/clock/mediatek,mt8188-sys-clock.yaml
new file mode 100644
index 0000000..4cf8d3a
--- /dev/null
+++ b/Bindings/clock/mediatek,mt8188-sys-clock.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8188-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8188
+
+maintainers:
+  - Garmin Chang <garmin.chang@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The apmixedsys provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provide the clock source to other IP blocks.
+  The infracfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+  The mcusys provides mux control to select the clock source in AP MCU.
+  The device nodes also provide the system control capacity for configuration.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8188-apmixedsys
+          - mediatek,mt8188-infracfg-ao
+          - mediatek,mt8188-pericfg-ao
+          - mediatek,mt8188-topckgen
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@10000000 {
+        compatible = "mediatek,mt8188-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/mediatek,mt8365-clock.yaml b/Bindings/clock/mediatek,mt8365-clock.yaml
new file mode 100644
index 0000000..b327ecb
--- /dev/null
+++ b/Bindings/clock/mediatek,mt8365-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8365-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8365
+
+maintainers:
+  - Markus Schneider-Pargmann <msp@baylibre.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8365-apu
+          - mediatek,mt8365-imgsys
+          - mediatek,mt8365-mfgcfg
+          - mediatek,mt8365-vdecsys
+          - mediatek,mt8365-vencsys
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    apu: clock-controller@19020000 {
+        compatible = "mediatek,mt8365-apu", "syscon";
+        reg = <0x19020000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/mediatek,mt8365-sys-clock.yaml b/Bindings/clock/mediatek,mt8365-sys-clock.yaml
new file mode 100644
index 0000000..643f846
--- /dev/null
+++ b/Bindings/clock/mediatek,mt8365-sys-clock.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8365-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8365
+
+maintainers:
+  - Markus Schneider-Pargmann <msp@baylibre.com>
+
+description:
+  The apmixedsys module provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provides the clock source to other IP blocks.
+  The infracfg_ao and pericfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8365-topckgen
+          - mediatek,mt8365-infracfg
+          - mediatek,mt8365-apmixedsys
+          - mediatek,mt8365-pericfg
+          - mediatek,mt8365-mcucfg
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: clock-controller@10000000 {
+        compatible = "mediatek,mt8365-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/mediatek,mtmips-sysc.yaml b/Bindings/clock/mediatek,mtmips-sysc.yaml
new file mode 100644
index 0000000..ba7ffc5
--- /dev/null
+++ b/Bindings/clock/mediatek,mtmips-sysc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mtmips-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MTMIPS SoCs System Controller
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  MediaTek MIPS and Ralink SoCs provides a system controller to allow
+  to access to system control registers. These registers include clock
+  and reset related ones so this node is both clock and reset provider
+  for the rest of the world.
+
+  These SoCs have an XTAL from where the cpu clock is
+  provided as well as derived clocks for the bus and the peripherals.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ralink,mt7620-sysc
+          - ralink,mt7628-sysc
+          - ralink,mt7688-sysc
+          - ralink,rt2880-sysc
+          - ralink,rt3050-sysc
+          - ralink,rt3052-sysc
+          - ralink,rt3352-sysc
+          - ralink,rt3883-sysc
+          - ralink,rt5350-sysc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      The first cell indicates the clock number.
+    const: 1
+
+  '#reset-cells':
+    description:
+      The first cell indicates the reset bit within the register.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@0 {
+      compatible = "ralink,rt5350-sysc", "syscon";
+      reg = <0x0 0x100>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/mediatek,topckgen.yaml b/Bindings/clock/mediatek,topckgen.yaml
new file mode 100644
index 0000000..6d087de
--- /dev/null
+++ b/Bindings/clock/mediatek,topckgen.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,topckgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Top Clock Generator Controller
+
+maintainers:
+  - Michael Turquette <mturquette@baylibre.com>
+  - Stephen Boyd <sboyd@kernel.org>
+
+description:
+  The Mediatek topckgen controller provides various clocks to the system.
+  The clock values can be found in <dt-bindings/clock/mt*-clk.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6797-topckgen
+          - mediatek,mt7622-topckgen
+          - mediatek,mt8135-topckgen
+          - mediatek,mt8173-topckgen
+          - mediatek,mt8516-topckgen
+      - items:
+          - const: mediatek,mt7623-topckgen
+          - const: mediatek,mt2701-topckgen
+          - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt2701-topckgen
+              - mediatek,mt2712-topckgen
+              - mediatek,mt6765-topckgen
+              - mediatek,mt6779-topckgen
+              - mediatek,mt6795-topckgen
+              - mediatek,mt7629-topckgen
+              - mediatek,mt7981-topckgen
+              - mediatek,mt7986-topckgen
+              - mediatek,mt8167-topckgen
+              - mediatek,mt8183-topckgen
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: clock-controller@10000000 {
+        compatible = "mediatek,mt8173-topckgen";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/microchip,lan966x-gck.yaml b/Bindings/clock/microchip,lan966x-gck.yaml
new file mode 100644
index 0000000..df2bec1
--- /dev/null
+++ b/Bindings/clock/microchip,lan966x-gck.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,lan966x-gck.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN966X Generic Clock Controller
+
+maintainers:
+  - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+
+description: |
+  The LAN966X Generic clock controller contains 3 PLLs - cpu_clk,
+  ddr_clk and sys_clk. This clock controller generates and supplies
+  clock to various peripherals within the SoC.
+
+properties:
+  compatible:
+    const: microchip,lan966x-gck
+
+  reg:
+    minItems: 1
+    items:
+      - description: Generic clock registers
+      - description: Optional gate clock registers
+
+  clocks:
+    items:
+      - description: CPU clock source
+      - description: DDR clock source
+      - description: System clock source
+
+  clock-names:
+    items:
+      - const: cpu
+      - const: ddr
+      - const: sys
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clks: clock-controller@e00c00a8 {
+        compatible = "microchip,lan966x-gck";
+        #clock-cells = <1>;
+        clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
+        clock-names = "cpu", "ddr", "sys";
+        reg = <0xe00c00a8 0x38>;
+    };
+...
diff --git a/Bindings/clock/microchip,mpfs-ccc.yaml b/Bindings/clock/microchip,mpfs-ccc.yaml
new file mode 100644
index 0000000..f177036
--- /dev/null
+++ b/Bindings/clock/microchip,mpfs-ccc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,mpfs-ccc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC Fabric Clock Conditioning Circuitry
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  Microchip PolarFire SoC has 4 Clock Conditioning Circuitry blocks. Each of
+  these blocks contains two PLLs and 2 DLLs & are located in the four corners of
+  the FPGA. For more information see "PolarFire SoC FPGA Clocking Resources" at:
+  https://onlinedocs.microchip.com/pr/GUID-8F0CC4C0-0317-4262-89CA-CE7773ED1931-en-US-1/index.html
+
+properties:
+  compatible:
+    const: microchip,mpfs-ccc
+
+  reg:
+    items:
+      - description: PLL0's control registers
+      - description: PLL1's control registers
+      - description: DLL0's control registers
+      - description: DLL1's control registers
+
+  clocks:
+    description:
+      The CCC PLL's have two input clocks. It is required that even if the input
+      clocks are identical that both are provided.
+    minItems: 2
+    items:
+      - description: PLL0's refclk0
+      - description: PLL0's refclk1
+      - description: PLL1's refclk0
+      - description: PLL1's refclk1
+      - description: DLL0's refclk
+      - description: DLL1's refclk
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pll0_ref0
+      - const: pll0_ref1
+      - const: pll1_ref0
+      - const: pll1_ref1
+      - const: dll0_ref
+      - const: dll1_ref
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@38100000 {
+        compatible = "microchip,mpfs-ccc";
+        reg = <0x38010000 0x1000>, <0x38020000 0x1000>,
+              <0x39010000 0x1000>, <0x39020000 0x1000>;
+        #clock-cells = <1>;
+        clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+                  <&refclk_ccc>, <&refclk_ccc>;
+        clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+                      "dll0_ref", "dll1_ref";
+    };
diff --git a/Bindings/clock/microchip,mpfs-clkcfg.yaml b/Bindings/clock/microchip,mpfs-clkcfg.yaml
new file mode 100644
index 0000000..e4e1c31
--- /dev/null
+++ b/Bindings/clock/microchip,mpfs-clkcfg.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,mpfs-clkcfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire Clock Control Module
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+description: |
+  Microchip PolarFire clock control (CLKCFG) is an integrated clock controller,
+  which gates and enables all peripheral clocks.
+
+  This device tree binding describes 33 gate clocks.  Clocks are referenced by
+  user nodes by the CLKCFG node phandle and the clock index in the group, from
+  0 to 32.
+
+properties:
+  compatible:
+    const: microchip,mpfs-clkcfg
+
+  reg:
+    items:
+      - description: |
+          clock config registers:
+          These registers contain enable, reset & divider tables for the, cpu,
+          axi, ahb and rtc/mtimer reference clocks as well as enable and reset
+          for the peripheral clocks.
+      - description: |
+          mss pll dri registers:
+          Block of registers responsible for dynamic reconfiguration of the mss
+          pll
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+
+  resets:
+    maxItems: 1
+
+  '#reset-cells':
+    description:
+      The AHB/AXI peripherals on the PolarFire SoC have reset support, so from
+      CLK_ENVM to CLK_CFM. The reset consumer should specify the desired
+      peripheral via the clock ID in its "resets" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Config node:
+  - |
+    #include <dt-bindings/clock/microchip,mpfs-clock.h>
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            clkcfg: clock-controller@20002000 {
+                compatible = "microchip,mpfs-clkcfg";
+                reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
+                clocks = <&ref>;
+                #clock-cells = <1>;
+        };
+    };
diff --git a/Bindings/clock/microchip,pic32.txt b/Bindings/clock/microchip,pic32.txt
new file mode 100644
index 0000000..c93d88f
--- /dev/null
+++ b/Bindings/clock/microchip,pic32.txt
@@ -0,0 +1,39 @@
+Microchip PIC32 Clock Controller Binding
+----------------------------------------
+Microchip clock controller is consists of few oscillators, PLL, multiplexer
+and few divider modules.
+
+This binding uses common clock bindings.
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: shall be "microchip,pic32mzda-clk".
+- reg: shall contain base address and length of clock registers.
+- #clock-cells: shall be 1.
+
+Optional properties:
+- microchip,pic32mzda-sosc: shall be added only if platform has
+  secondary oscillator connected.
+
+Example:
+	rootclk: clock-controller@1f801200 {
+		compatible = "microchip,pic32mzda-clk";
+		reg = <0x1f801200 0x200>;
+		#clock-cells = <1>;
+		/* optional */
+		microchip,pic32mzda-sosc;
+	};
+
+
+The clock consumer shall specify the desired clock-output of the clock
+controller (as defined in [2]) by specifying output-id in its "clock"
+phandle cell.
+[2] include/dt-bindings/clock/microchip,pic32-clock.h
+
+For example for UART2:
+uart2: serial@2 {
+	compatible = "microchip,pic32mzda-uart";
+	reg = <>;
+	interrupts = <>;
+	clocks = <&rootclk PB2CLK>;
+};
diff --git a/Bindings/clock/microchip,sparx5-dpll.yaml b/Bindings/clock/microchip,sparx5-dpll.yaml
new file mode 100644
index 0000000..39559a0
--- /dev/null
+++ b/Bindings/clock/microchip,sparx5-dpll.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,sparx5-dpll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 DPLL Clock
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  The Sparx5 DPLL clock controller generates and supplies clock to
+  various peripherals within the SoC.
+
+properties:
+  compatible:
+    const: microchip,sparx5-dpll
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock provider for eMMC:
+  - |
+    lcpll_clk: lcpll-clk {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <2500000000>;
+    };
+    clks: clock-controller@61110000c {
+        compatible = "microchip,sparx5-dpll";
+        #clock-cells = <1>;
+        clocks = <&lcpll_clk>;
+        reg = <0x1110000c 0x24>;
+    };
+
+...
diff --git a/Bindings/clock/milbeaut-clock.yaml b/Bindings/clock/milbeaut-clock.yaml
new file mode 100644
index 0000000..0af1c56
--- /dev/null
+++ b/Bindings/clock/milbeaut-clock.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/milbeaut-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Milbeaut SoCs Clock Controller
+
+maintainers:
+  - Taichi Sugaya <sugaya.taichi@socionext.com>
+
+description: |
+  Milbeaut SoCs Clock controller is an integrated clock controller, which
+  generates and supplies to all modules.
+
+  This binding uses common clock bindings
+  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+properties:
+  compatible:
+    enum:
+      - socionext,milbeaut-m10v-ccu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: external clock
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock controller node:
+  - |
+    m10v-clk-ctrl@1d021000 {
+        compatible = "socionext,milbeaut-m10v-ccu";
+        reg = <0x1d021000 0x4000>;
+        #clock-cells = <1>;
+        clocks = <&clki40mhz>;
+    };
+
+  # Required an external clock for Clock controller node:
+  - |
+    clocks {
+        clki40mhz: clki40mhz {
+            compatible = "fixed-clock";
+            #clock-cells = <0>;
+            clock-frequency = <40000000>;
+        };
+        /* other clocks */
+    };
+
+  # The clock consumer shall specify the desired clock-output of the clock
+  # controller as below by specifying output-id in its "clk" phandle cell.
+  # 2: uart
+  # 4: 32-bit timer
+  # 7: UHS-I/II
+  - |
+    serial@1e700010 {
+        compatible = "socionext,milbeaut-usio-uart";
+        reg = <0x1e700010 0x10>;
+        interrupts = <0 141 0x4>, <0 149 0x4>;
+        interrupt-names = "rx", "tx";
+        clocks = <&clk 2>;
+    };
+
+...
diff --git a/Bindings/clock/moxa,moxart-clock.txt b/Bindings/clock/moxa,moxart-clock.txt
new file mode 100644
index 0000000..fedea84
--- /dev/null
+++ b/Bindings/clock/moxa,moxart-clock.txt
@@ -0,0 +1,48 @@
+Device Tree Clock bindings for arch-moxart
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+MOXA ART SoCs allow to determine PLL output and APB frequencies
+by reading registers holding multiplier and divisor information.
+
+
+PLL:
+
+Required properties:
+- compatible : Must be "moxa,moxart-pll-clock"
+- #clock-cells : Should be 0
+- reg : Should contain registers location and length
+- clocks : Should contain phandle + clock-specifier for the parent clock
+
+Optional properties:
+- clock-output-names : Should contain clock name
+
+
+APB:
+
+Required properties:
+- compatible : Must be "moxa,moxart-apb-clock"
+- #clock-cells : Should be 0
+- reg : Should contain registers location and length
+- clocks : Should contain phandle + clock-specifier for the parent clock
+
+Optional properties:
+- clock-output-names : Should contain clock name
+
+
+For example:
+
+	clk_pll: clk_pll@98100000 {
+		compatible = "moxa,moxart-pll-clock";
+		#clock-cells = <0>;
+		reg = <0x98100000 0x34>;
+	};
+
+	clk_apb: clk_apb@98100000 {
+		compatible = "moxa,moxart-apb-clock";
+		#clock-cells = <0>;
+		reg = <0x98100000 0x34>;
+		clocks = <&clk_pll>;
+	};
diff --git a/Bindings/clock/mstar,msc313-cpupll.yaml b/Bindings/clock/mstar,msc313-cpupll.yaml
new file mode 100644
index 0000000..a9ad7ab
--- /dev/null
+++ b/Bindings/clock/mstar,msc313-cpupll.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mstar,msc313-cpupll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar/Sigmastar MSC313 CPU PLL
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+description: |
+  The MStar/SigmaStar MSC313 and later ARMv7 chips have a scalable
+  PLL that can be used as the clock source for the CPU(s).
+
+properties:
+  compatible:
+    const: mstar,msc313-cpupll
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mstar-msc313-mpll.h>
+    cpupll: cpupll@206400 {
+        compatible = "mstar,msc313-cpupll";
+        reg = <0x206400 0x200>;
+        #clock-cells = <1>;
+        clocks = <&mpll MSTAR_MSC313_MPLL_DIV2>;
+    };
diff --git a/Bindings/clock/mstar,msc313-mpll.yaml b/Bindings/clock/mstar,msc313-mpll.yaml
new file mode 100644
index 0000000..0df5d75
--- /dev/null
+++ b/Bindings/clock/mstar,msc313-mpll.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mstar,msc313-mpll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar/Sigmastar MSC313 MPLL
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+description: |
+  The MStar/SigmaStar MSC313 and later ARMv7 chips have an MPLL block that
+  takes the external xtal input and multiplies it to create a high
+  frequency clock and divides that down into a number of clocks that
+  peripherals use.
+
+properties:
+  compatible:
+    const: mstar,msc313-mpll
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    mpll@206000 {
+        compatible = "mstar,msc313-mpll";
+        reg = <0x206000 0x200>;
+        #clock-cells = <1>;
+        clocks = <&xtal>;
+    };
diff --git a/Bindings/clock/mvebu-core-clock.txt b/Bindings/clock/mvebu-core-clock.txt
new file mode 100644
index 0000000..d8f5c49
--- /dev/null
+++ b/Bindings/clock/mvebu-core-clock.txt
@@ -0,0 +1,87 @@
+* Core Clock bindings for Marvell MVEBU SoCs
+
+Marvell MVEBU SoCs usually allow to determine core clock frequencies by
+reading the Sample-At-Reset (SAR) register. The core clock consumer should
+specify the desired clock by having the clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs and clock names on Armada 370/XP:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = nbclk   (L2 Cache clock)
+ 3 = hclk    (DRAM control clock)
+ 4 = dramclk (DDR clock)
+
+The following is a list of provided IDs and clock names on Armada 375:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = l2clk   (L2 Cache clock)
+ 3 = ddrclk  (DDR clock)
+
+The following is a list of provided IDs and clock names on Armada 380/385:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = l2clk   (L2 Cache clock)
+ 3 = ddrclk  (DDR clock)
+
+The following is a list of provided IDs and clock names on Armada 39x:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = nbclk   (Coherent Fabric clock)
+ 3 = hclk    (SDRAM Controller Internal Clock)
+ 4 = dclk    (SDRAM Interface Clock)
+ 5 = refclk  (Reference Clock)
+
+The following is a list of provided IDs and clock names on 98dx3236:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = ddrclk   (DDR clock)
+ 3 = mpll    (MPLL Clock)
+
+The following is a list of provided IDs and clock names on Kirkwood and Dove:
+ 0 = tclk   (Internal Bus clock)
+ 1 = cpuclk (CPU0 clock)
+ 2 = l2clk  (L2 Cache clock derived from CPU0 clock)
+ 3 = ddrclk (DDR controller clock derived from CPU0 clock)
+
+The following is a list of provided IDs and clock names on Orion5x:
+ 0 = tclk   (Internal Bus clock)
+ 1 = cpuclk (CPU0 clock)
+ 2 = ddrclk (DDR controller clock derived from CPU0 clock)
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,armada-370-core-clock" - For Armada 370 SoC core clocks
+	"marvell,armada-375-core-clock" - For Armada 375 SoC core clocks
+	"marvell,armada-380-core-clock" - For Armada 380/385 SoC core clocks
+	"marvell,armada-390-core-clock" - For Armada 39x SoC core clocks
+	"marvell,armada-xp-core-clock" - For Armada XP SoC core clocks
+	"marvell,mv98dx3236-core-clock" - For 98dx3236 family SoC core clocks
+	"marvell,dove-core-clock" - for Dove SoC core clocks
+	"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
+	"marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
+	"marvell,mv98dx1135-core-clock" - for Kirkwood 98dx1135 SoC
+	"marvell,mv88f5181-core-clock" - for Orion MV88F5181 SoC
+	"marvell,mv88f5182-core-clock" - for Orion MV88F5182 SoC
+	"marvell,mv88f5281-core-clock" - for Orion MV88F5281 SoC
+	"marvell,mv88f6183-core-clock" - for Orion MV88F6183 SoC
+- reg : shall be the register address of the Sample-At-Reset (SAR) register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clock-output-names : from common clock binding; allows overwrite default clock
+	output names ("tclk", "cpuclk", "l2clk", "ddrclk")
+
+Example:
+
+core_clk: core-clocks@d0214 {
+	compatible = "marvell,dove-core-clock";
+	reg = <0xd0214 0x4>;
+	#clock-cells = <1>;
+};
+
+spi0: spi@10600 {
+	compatible = "marvell,orion-spi";
+	/* ... */
+	/* get tclk from core clock provider */
+	clocks = <&core_clk 0>;
+};
diff --git a/Bindings/clock/mvebu-corediv-clock.txt b/Bindings/clock/mvebu-corediv-clock.txt
new file mode 100644
index 0000000..c7b4e3a
--- /dev/null
+++ b/Bindings/clock/mvebu-corediv-clock.txt
@@ -0,0 +1,23 @@
+* Core Divider Clock bindings for Marvell MVEBU SoCs
+
+The following is a list of provided IDs and clock names on Armada 370/XP:
+ 0 = nand (NAND clock)
+
+Required properties:
+- compatible : must be "marvell,armada-370-corediv-clock",
+		       "marvell,armada-375-corediv-clock",
+		       "marvell,armada-380-corediv-clock",
+                       "marvell,mv98dx3236-corediv-clock",
+
+- reg : must be the register address of Core Divider control register
+- #clock-cells : from common clock binding; shall be set to 1
+- clocks : must be set to the parent's phandle
+
+Example:
+
+corediv_clk: corediv-clocks@18740 {
+	compatible = "marvell,armada-370-corediv-clock";
+	reg = <0x18740 0xc>;
+	#clock-cells = <1>;
+	clocks = <&pll>;
+};
diff --git a/Bindings/clock/mvebu-cpu-clock.txt b/Bindings/clock/mvebu-cpu-clock.txt
new file mode 100644
index 0000000..7f28506
--- /dev/null
+++ b/Bindings/clock/mvebu-cpu-clock.txt
@@ -0,0 +1,23 @@
+Device Tree Clock bindings for cpu clock of Marvell EBU platforms
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP
+	"marvell,mv98dx3236-cpu-clock" - cpu clocks for 98DX3236 SoC
+- reg : Address and length of the clock complex register set, followed
+        by address and length of the PMU DFS registers
+- #clock-cells : should be set to 1.
+- clocks : shall be the input parent clock phandle for the clock.
+
+cpuclk: clock-complex@d0018700 {
+	#clock-cells = <1>;
+	compatible = "marvell,armada-xp-cpu-clock";
+	reg = <0xd0018700 0xA0>, <0x1c054 0x10>;
+	clocks = <&coreclk 1>;
+}
+
+cpu@0 {
+	compatible = "marvell,sheeva-v7";
+	reg = <0>;
+	clocks = <&cpuclk 0>;
+};
diff --git a/Bindings/clock/mvebu-gated-clock.txt b/Bindings/clock/mvebu-gated-clock.txt
new file mode 100644
index 0000000..de562da
--- /dev/null
+++ b/Bindings/clock/mvebu-gated-clock.txt
@@ -0,0 +1,205 @@
+* Gated Clock bindings for Marvell EBU SoCs
+
+Marvell Armada 370/375/380/385/39x/XP, Dove and Kirkwood allow some
+peripheral clocks to be gated to save some power. The clock consumer
+should specify the desired clock by having the clock ID in its
+"clocks" phandle cell. The clock ID is directly mapped to the
+corresponding clock gating control bit in HW to ease manual clock
+lookup in datasheet.
+
+The following is a list of provided IDs for Armada 370:
+ID	Clock	Peripheral
+-----------------------------------
+0	Audio	AC97 Cntrl
+1	pex0_en	PCIe 0 Clock out
+2	pex1_en	PCIe 1 Clock out
+3	ge1	Gigabit Ethernet 1
+4	ge0	Gigabit Ethernet 0
+5	pex0	PCIe Cntrl 0
+9	pex1	PCIe Cntrl 1
+15	sata0	SATA Host 0
+17	sdio	SDHCI Host
+23	crypto	CESA (crypto engine)
+25	tdm	Time Division Mplx
+28	ddr	DDR Cntrl
+30	sata1	SATA Host 0
+
+The following is a list of provided IDs for Armada 375:
+ID	Clock		Peripheral
+-----------------------------------
+2	mu		Management Unit
+3	pp		Packet Processor
+4	ptp		PTP
+5	pex0		PCIe 0 Clock out
+6	pex1		PCIe 1 Clock out
+8	audio		Audio Cntrl
+11	nd_clk		Nand Flash Cntrl
+14	sata0_link	SATA 0 Link
+15	sata0_core	SATA 0 Core
+16	usb3		USB3 Host
+17	sdio		SDHCI Host
+18	usb		USB Host
+19	gop		Gigabit Ethernet MAC
+20	sata1_link	SATA 1 Link
+21	sata1_core	SATA 1 Core
+22	xor0		XOR DMA 0
+23	xor1		XOR DMA 0
+24	copro		Coprocessor
+25	tdm		Time Division Mplx
+28	crypto0_enc	Cryptographic Unit Port 0 Encryption
+29	crypto0_core	Cryptographic Unit Port 0 Core
+30	crypto1_enc	Cryptographic Unit Port 1 Encryption
+31	crypto1_core	Cryptographic Unit Port 1 Core
+
+The following is a list of provided IDs for Armada 380/385:
+ID	Clock		Peripheral
+-----------------------------------
+0	audio		Audio
+2	ge2		Gigabit Ethernet 2
+3	ge1		Gigabit Ethernet 1
+4	ge0		Gigabit Ethernet 0
+5	pex1		PCIe 1
+6	pex2		PCIe 2
+7	pex3		PCIe 3
+8	pex0		PCIe 0
+9	usb3h0		USB3 Host 0
+10	usb3h1		USB3 Host 1
+11	usb3d		USB3 Device
+13	bm		Buffer Management
+14	crypto0z	Cryptographic 0 Z
+15	sata0		SATA 0
+16	crypto1z	Cryptographic 1 Z
+17	sdio		SDIO
+18	usb2		USB 2
+21	crypto1		Cryptographic 1
+22	xor0		XOR 0
+23	crypto0		Cryptographic 0
+25	tdm		Time Division Multiplexing
+28	xor1		XOR 1
+30	sata1		SATA 1
+
+The following is a list of provided IDs for Armada 39x:
+ID	Clock		Peripheral
+-----------------------------------
+5	pex1		PCIe 1
+6	pex2		PCIe 2
+7	pex3		PCIe 3
+8	pex0		PCIe 0
+9	usb3h0		USB3 Host 0
+10	usb3h1		USB3 Host 1
+15	sata0		SATA 0
+17	sdio		SDIO
+22	xor0		XOR 0
+28	xor1		XOR 1
+
+The following is a list of provided IDs for Armada XP:
+ID	Clock	Peripheral
+-----------------------------------
+0	audio	Audio Cntrl
+1	ge3	Gigabit Ethernet 3
+2	ge2	Gigabit Ethernet 2
+3	ge1	Gigabit Ethernet 1
+4	ge0	Gigabit Ethernet 0
+5	pex0	PCIe Cntrl 0
+6	pex1	PCIe Cntrl 1
+7	pex2	PCIe Cntrl 2
+8	pex3	PCIe Cntrl 3
+13	bp
+14	sata0lnk
+15	sata0	SATA Host 0
+16	lcd	LCD Cntrl
+17	sdio	SDHCI Host
+18	usb0	USB Host 0
+19	usb1	USB Host 1
+20	usb2	USB Host 2
+22	xor0	XOR DMA 0
+23	crypto	CESA engine
+25	tdm	Time Division Mplx
+28	xor1	XOR DMA 1
+29	sata1lnk
+30	sata1	SATA Host 1
+
+The following is a list of provided IDs for 98dx3236:
+ID	Clock	Peripheral
+-----------------------------------
+3	ge1	Gigabit Ethernet 1
+4	ge0	Gigabit Ethernet 0
+5	pex0	PCIe Cntrl 0
+17	sdio	SDHCI Host
+18	usb0	USB Host 0
+22	xor0	XOR DMA 0
+
+The following is a list of provided IDs for Dove:
+ID	Clock	Peripheral
+-----------------------------------
+0	usb0	USB Host 0
+1	usb1	USB Host 1
+2	ge	Gigabit Ethernet
+3	sata	SATA Host
+4	pex0	PCIe Cntrl 0
+5	pex1	PCIe Cntrl 1
+8	sdio0	SDHCI Host 0
+9	sdio1	SDHCI Host 1
+10	nand	NAND Cntrl
+11	camera	Camera Cntrl
+12	i2s0	I2S Cntrl 0
+13	i2s1	I2S Cntrl 1
+15	crypto	CESA engine
+21	ac97	AC97 Cntrl
+22	pdma	Peripheral DMA
+23	xor0	XOR DMA 0
+24	xor1	XOR DMA 1
+30	gephy	Gigabit Ethernel PHY
+Note: gephy(30) is implemented as a parent clock of ge(2)
+
+The following is a list of provided IDs for Kirkwood:
+ID	Clock	Peripheral
+-----------------------------------
+0	ge0	Gigabit Ethernet 0
+2	pex0	PCIe Cntrl 0
+3	usb0	USB Host 0
+4	sdio	SDIO Cntrl
+5	tsu	Transp. Stream Unit
+6	dunit	SDRAM Cntrl
+7	runit	Runit
+8	xor0	XOR DMA 0
+9	audio	I2S Cntrl 0
+14	sata0	SATA Host 0
+15	sata1	SATA Host 1
+16	xor1	XOR DMA 1
+17	crypto	CESA engine
+18	pex1	PCIe Cntrl 1
+19	ge1	Gigabit Ethernet 1
+20	tdm	Time Division Mplx
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating
+	"marvell,armada-375-gating-clock" - for Armada 375 SoC clock gating
+	"marvell,armada-380-gating-clock" - for Armada 380/385 SoC clock gating
+	"marvell,armada-390-gating-clock" - for Armada 39x SoC clock gating
+	"marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating
+	"marvell,mv98dx3236-gating-clock" - for 98dx3236 SoC clock gating
+	"marvell,dove-gating-clock" - for Dove SoC clock gating
+	"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
+- reg : shall be the register address of the Clock Gating Control register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clocks : default parent clock phandle (e.g. tclk)
+
+Example:
+
+gate_clk: clock-gating-control@d0038 {
+	compatible = "marvell,dove-gating-clock";
+	reg = <0xd0038 0x4>;
+	/* default parent clock is tclk */
+	clocks = <&core_clk 0>;
+	#clock-cells = <1>;
+};
+
+sdio0: sdio@92000 {
+	compatible = "marvell,dove-sdhci";
+	/* get clk gate bit 8 (sdio0) */
+	clocks = <&gate_clk 8>;
+};
diff --git a/Bindings/clock/nspire-clock.txt b/Bindings/clock/nspire-clock.txt
new file mode 100644
index 0000000..7c3bc8b
--- /dev/null
+++ b/Bindings/clock/nspire-clock.txt
@@ -0,0 +1,24 @@
+TI-NSPIRE Clocks
+
+Required properties:
+- compatible: Valid compatible properties include:
+	"lsi,nspire-cx-ahb-divider" for the AHB divider in the CX model
+	"lsi,nspire-classic-ahb-divider" for the AHB divider in the older model
+	"lsi,nspire-cx-clock" for the base clock in the CX model
+	"lsi,nspire-classic-clock" for the base clock in the older model
+
+- reg: Physical base address of the controller and length of memory mapped
+	region.
+
+Optional:
+- clocks: For the "nspire-*-ahb-divider" compatible clocks, this is the parent
+	clock where it divides the rate from.
+
+Example:
+
+ahb_clk {
+	#clock-cells = <0>;
+	compatible = "lsi,nspire-cx-clock";
+	reg = <0x900B0000 0x4>;
+	clocks = <&base_clk>;
+};
diff --git a/Bindings/clock/nuvoton,ma35d1-clk.yaml b/Bindings/clock/nuvoton,ma35d1-clk.yaml
new file mode 100644
index 0000000..8f0c436
--- /dev/null
+++ b/Bindings/clock/nuvoton,ma35d1-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,ma35d1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Clock Controller Module
+
+maintainers:
+  - Chi-Fang Li <cfli0@nuvoton.com>
+  - Jacky Huang <ychuang3@nuvoton.com>
+
+description: |
+  The MA35D1 clock controller generates clocks for the whole chip,
+  including system clocks and all peripheral clocks.
+
+  See also:
+    include/dt-bindings/clock/ma35d1-clk.h
+
+properties:
+  compatible:
+    items:
+      - const: nuvoton,ma35d1-clk
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  nuvoton,pll-mode:
+    description:
+      A list of PLL operation mode corresponding to CAPLL, DDRPLL, APLL,
+      EPLL, and VPLL in sequential.
+    maxItems: 5
+    items:
+      enum:
+        - integer
+        - fractional
+        - spread-spectrum
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+
+    clock-controller@40460200 {
+        compatible = "nuvoton,ma35d1-clk";
+        reg = <0x40460200 0x100>;
+        #clock-cells = <1>;
+        clocks = <&clk_hxt>;
+    };
+...
diff --git a/Bindings/clock/nuvoton,npcm750-clk.txt b/Bindings/clock/nuvoton,npcm750-clk.txt
new file mode 100644
index 0000000..f820645
--- /dev/null
+++ b/Bindings/clock/nuvoton,npcm750-clk.txt
@@ -0,0 +1,100 @@
+* Nuvoton NPCM7XX Clock Controller
+
+Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which
+generates and supplies clocks to all modules within the BMC.
+
+External clocks:
+
+There are six fixed clocks that are generated outside the BMC. All clocks are of
+a known fixed value that cannot be changed. clk_refclk, clk_mcbypck and
+clk_sysbypck are inputs to the clock controller.
+clk_rg1refck, clk_rg2refck and clk_xin are external clocks suppling the
+network. They are set on the device tree, but not used by the clock module. The
+network devices use them directly.
+Example can be found below.
+
+All available clocks are defined as preprocessor macros in:
+dt-bindings/clock/nuvoton,npcm7xx-clock.h
+and can be reused as DT sources.
+
+Required Properties of clock controller:
+
+	- compatible: "nuvoton,npcm750-clk" : for clock controller of Nuvoton
+		  Poleg BMC NPCM750
+
+	- reg: physical base address of the clock controller and length of
+		memory mapped region.
+
+	- #clock-cells: should be 1.
+
+Example: Clock controller node:
+
+	clk: clock-controller@f0801000 {
+		compatible = "nuvoton,npcm750-clk";
+		#clock-cells = <1>;
+		reg = <0xf0801000 0x1000>;
+		clock-names = "refclk", "sysbypck", "mcbypck";
+		clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
+	};
+
+Example: Required external clocks for network:
+
+	/* external reference clock */
+	clk_refclk: clk-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "refclk";
+	};
+
+	/* external reference clock for cpu. float in normal operation */
+	clk_sysbypck: clk-sysbypck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <800000000>;
+		clock-output-names = "sysbypck";
+	};
+
+	/* external reference clock for MC. float in normal operation */
+	clk_mcbypck: clk-mcbypck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <800000000>;
+		clock-output-names = "mcbypck";
+	};
+
+	 /* external clock signal rg1refck, supplied by the phy */
+	clk_rg1refck: clk-rg1refck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "clk_rg1refck";
+	};
+
+	 /* external clock signal rg2refck, supplied by the phy */
+	clk_rg2refck: clk-rg2refck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "clk_rg2refck";
+	};
+
+	clk_xin: clk-xin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "clk_xin";
+	};
+
+
+Example: GMAC controller node that consumes two clocks: a generated clk by the
+clock controller and a fixed clock from DT (clk_rg1refck).
+
+	ethernet0: ethernet@f0802000 {
+		compatible = "snps,dwmac";
+		reg = <0xf0802000 0x2000>;
+		interrupts = <0 14 4>;
+		interrupt-names = "macirq";
+		clocks	= <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
+		clock-names = "stmmaceth", "clk_gmac";
+	};
diff --git a/Bindings/clock/nuvoton,npcm845-clk.yaml b/Bindings/clock/nuvoton,npcm845-clk.yaml
new file mode 100644
index 0000000..b901ca1
--- /dev/null
+++ b/Bindings/clock/nuvoton,npcm845-clk.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,npcm845-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM8XX Clock Controller
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description: |
+  Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller, which
+  generates and supplies clocks to all modules within the BMC.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm845-clk
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See include/dt-bindings/clock/nuvoton,npcm8xx-clock.h for the full
+      list of NPCM8XX clock IDs.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ahb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@f0801000 {
+            compatible = "nuvoton,npcm845-clk";
+            reg = <0x0 0xf0801000 0x0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
+...
diff --git a/Bindings/clock/nvidia,tegra124-car.yaml b/Bindings/clock/nvidia,tegra124-car.yaml
new file mode 100644
index 0000000..a9ba211
--- /dev/null
+++ b/Bindings/clock/nvidia,tegra124-car.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nvidia,tegra124-car.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Clock and Reset Controller
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The Clock and Reset (CAR) is the HW module responsible for muxing and gating
+  Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units.
+
+  CLKGEN provides the registers to program the PLLs. It controls most of
+  the clock source programming and most of the clock dividers.
+
+  CLKGEN input signals include the external clock for the reference frequency
+  (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz).
+
+  Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system.
+
+  RSTGEN provides the registers needed to control resetting of each block in
+  the Tegra system.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra124-car
+      - nvidia,tegra132-car
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  nvidia,external-memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of the external memory controller node
+
+patternProperties:
+  "^emc-timings-[0-9]+$":
+    type: object
+    properties:
+      nvidia,ram-code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          value of the RAM_CODE field in the PMC_STRAPPING_OPT_A register that
+          this timing set is used for
+
+    patternProperties:
+      "^timing-[0-9]+$":
+        type: object
+        properties:
+          clock-frequency:
+            description:
+              external memory clock rate in Hz
+            minimum: 1000000
+            maximum: 1000000000
+
+          nvidia,parent-clock-frequency:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              rate of parent clock in Hz
+            minimum: 1000000
+            maximum: 1000000000
+
+          clocks:
+            items:
+              - description: parent clock of EMC
+
+          clock-names:
+            items:
+              - const: emc-parent
+
+        required:
+          - clock-frequency
+          - nvidia,parent-clock-frequency
+          - clocks
+          - clock-names
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+
+    car: clock-controller@60006000 {
+        compatible = "nvidia,tegra124-car";
+        reg = <0x60006000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/nvidia,tegra124-dfll.txt b/Bindings/clock/nvidia,tegra124-dfll.txt
new file mode 100644
index 0000000..f7d3473
--- /dev/null
+++ b/Bindings/clock/nvidia,tegra124-dfll.txt
@@ -0,0 +1,155 @@
+NVIDIA Tegra124 DFLL FCPU clocksource
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The DFLL IP block on Tegra is a root clocksource designed for clocking
+the fast CPU cluster. It consists of a free-running voltage controlled
+oscillator connected to the CPU voltage rail (VDD_CPU), and a closed loop
+control module that will automatically adjust the VDD_CPU voltage by
+communicating with an off-chip PMIC either via an I2C bus or via PWM signals.
+
+Required properties:
+- compatible : should be one of:
+  - "nvidia,tegra124-dfll": for Tegra124
+  - "nvidia,tegra210-dfll": for Tegra210
+- reg : Defines the following set of registers, in the order listed:
+        - registers for the DFLL control logic.
+        - registers for the I2C output logic.
+        - registers for the integrated I2C master controller.
+        - look-up table RAM for voltage register values.
+- interrupts: Should contain the DFLL block interrupt.
+- clocks: Must contain an entry for each entry in clock-names.
+  See clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - soc: Clock source for the DFLL control logic.
+  - ref: The closed loop reference clock
+  - i2c: Clock source for the integrated I2C master.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - dvco: Reset control for the DFLL DVCO.
+- #clock-cells: Must be 0.
+- clock-output-names: Name of the clock output.
+- vdd-cpu-supply: Regulator for the CPU voltage rail that the DFLL
+  hardware will start controlling. The regulator will be queried for
+  the I2C register, control values and supported voltages.
+
+Required properties for the control loop parameters:
+- nvidia,sample-rate: Sample rate of the DFLL control loop.
+- nvidia,droop-ctrl: See the register CL_DVFS_DROOP_CTRL in the TRM.
+- nvidia,force-mode: See the field DFLL_PARAMS_FORCE_MODE in the TRM.
+- nvidia,cf: Numeric value, see the field DFLL_PARAMS_CF_PARAM in the TRM.
+- nvidia,ci: Numeric value, see the field DFLL_PARAMS_CI_PARAM in the TRM.
+- nvidia,cg: Numeric value, see the field DFLL_PARAMS_CG_PARAM in the TRM.
+
+Optional properties for the control loop parameters:
+- nvidia,cg-scale: Boolean value, see the field DFLL_PARAMS_CG_SCALE in the TRM.
+
+Optional properties for mode selection:
+- nvidia,pwm-to-pmic: Use PWM to control regulator rather then I2C.
+
+Required properties for I2C mode:
+- nvidia,i2c-fs-rate: I2C transfer rate, if using full speed mode.
+
+Required properties for PWM mode:
+- nvidia,pwm-period-nanoseconds: period of PWM square wave in nanoseconds.
+- nvidia,pwm-tristate-microvolts: Regulator voltage in micro volts when PWM
+  control is disabled and the PWM output is tristated. Note that this voltage is
+  configured in hardware, typically via a resistor divider.
+- nvidia,pwm-min-microvolts: Regulator voltage in micro volts when PWM control
+  is enabled and PWM output is low. Hence, this is the minimum output voltage
+  that the regulator supports when PWM control is enabled.
+- nvidia,pwm-voltage-step-microvolts: Voltage increase in micro volts
+  corresponding to a 1/33th increase in duty cycle. Eg the voltage for 2/33th
+  duty cycle would be: nvidia,pwm-min-microvolts +
+  nvidia,pwm-voltage-step-microvolts * 2.
+- pinctrl-0: I/O pad configuration when PWM control is enabled.
+- pinctrl-1: I/O pad configuration when PWM control is disabled.
+- pinctrl-names: must include the following entries:
+  - dvfs_pwm_enable: I/O pad configuration when PWM control is enabled.
+  - dvfs_pwm_disable: I/O pad configuration when PWM control is disabled.
+
+Example for I2C:
+
+clock@70110000 {
+        compatible = "nvidia,tegra124-dfll";
+        reg = <0 0x70110000 0 0x100>, /* DFLL control */
+              <0 0x70110000 0 0x100>, /* I2C output control */
+              <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+              <0 0x70110200 0 0x100>; /* Look-up table RAM */
+        interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>,
+                 <&tegra_car TEGRA124_CLK_DFLL_REF>,
+                 <&tegra_car TEGRA124_CLK_I2C5>;
+        clock-names = "soc", "ref", "i2c";
+        resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+        reset-names = "dvco";
+        #clock-cells = <0>;
+        clock-output-names = "dfllCPU_out";
+        vdd-cpu-supply = <&vdd_cpu>;
+
+        nvidia,sample-rate = <12500>;
+        nvidia,droop-ctrl = <0x00000f00>;
+        nvidia,force-mode = <1>;
+        nvidia,cf = <10>;
+        nvidia,ci = <0>;
+        nvidia,cg = <2>;
+
+        nvidia,i2c-fs-rate = <400000>;
+};
+
+Example for PWM:
+
+clock@70110000 {
+	compatible = "nvidia,tegra124-dfll";
+	reg = <0 0x70110000 0 0x100>, /* DFLL control */
+	      <0 0x70110000 0 0x100>, /* I2C output control */
+	      <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+	      <0 0x70110200 0 0x100>; /* Look-up table RAM */
+	interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&tegra_car TEGRA210_CLK_DFLL_SOC>,
+	         <&tegra_car TEGRA210_CLK_DFLL_REF>,
+		 <&tegra_car TEGRA124_CLK_I2C5>;;
+	clock-names = "soc", "ref", "i2c";
+	resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+	reset-names = "dvco";
+	#clock-cells = <0>;
+	clock-output-names = "dfllCPU_out";
+
+	nvidia,sample-rate = <25000>;
+	nvidia,droop-ctrl = <0x00000f00>;
+	nvidia,force-mode = <1>;
+	nvidia,cf = <6>;
+	nvidia,ci = <0>;
+	nvidia,cg = <2>;
+
+	nvidia,pwm-min-microvolts = <708000>; /* 708mV */
+	nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */
+	nvidia,pwm-to-pmic;
+	nvidia,pwm-tristate-microvolts = <1000000>;
+	nvidia,pwm-voltage-step-microvolts = <19200>; /* 19.2mV */
+
+	pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable";
+	pinctrl-0 = <&dvfs_pwm_active_state>;
+	pinctrl-1 = <&dvfs_pwm_inactive_state>;
+};
+
+/* pinmux nodes added for completeness. Binding doc can be found in:
+ * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml
+ */
+
+pinmux: pinmux@700008d4 {
+	dvfs_pwm_active_state: dvfs_pwm_active {
+		dvfs_pwm_pbb1 {
+			nvidia,pins = "dvfs_pwm_pbb1";
+			nvidia,tristate = <TEGRA_PIN_DISABLE>;
+		};
+	};
+	dvfs_pwm_inactive_state: dvfs_pwm_inactive {
+		dvfs_pwm_pbb1 {
+			nvidia,pins = "dvfs_pwm_pbb1";
+			nvidia,tristate = <TEGRA_PIN_ENABLE>;
+		};
+	};
+};
diff --git a/Bindings/clock/nvidia,tegra20-car.yaml b/Bindings/clock/nvidia,tegra20-car.yaml
new file mode 100644
index 0000000..bee2dd4
--- /dev/null
+++ b/Bindings/clock/nvidia,tegra20-car.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nvidia,tegra20-car.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Clock and Reset Controller
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The Clock and Reset (CAR) is the HW module responsible for muxing and gating
+  Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units.
+
+  CLKGEN provides the registers to program the PLLs. It controls most of
+  the clock source programming and most of the clock dividers.
+
+  CLKGEN input signals include the external clock for the reference frequency
+  (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz).
+
+  Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system.
+
+  RSTGEN provides the registers needed to control resetting of each block in
+  the Tegra system.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-car
+      - nvidia,tegra30-car
+      - nvidia,tegra114-car
+      - nvidia,tegra210-car
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+patternProperties:
+  "^(sclk)|(pll-[cem])$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - nvidia,tegra20-sclk
+          - nvidia,tegra30-sclk
+          - nvidia,tegra30-pllc
+          - nvidia,tegra30-plle
+          - nvidia,tegra30-pllm
+
+      operating-points-v2: true
+
+      clocks:
+        items:
+          - description: node's clock
+
+      power-domains:
+        maxItems: 1
+        description: phandle to the core SoC power domain
+
+    required:
+      - compatible
+      - operating-points-v2
+      - clocks
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    car: clock-controller@60006000 {
+        compatible = "nvidia,tegra20-car";
+        reg = <0x60006000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        sclk {
+            compatible = "nvidia,tegra20-sclk";
+            operating-points-v2 = <&opp_table>;
+            clocks = <&tegra_car TEGRA20_CLK_SCLK>;
+            power-domains = <&domain>;
+        };
+    };
diff --git a/Bindings/clock/nxp,lpc3220-clk.txt b/Bindings/clock/nxp,lpc3220-clk.txt
new file mode 100644
index 0000000..20cbca3
--- /dev/null
+++ b/Bindings/clock/nxp,lpc3220-clk.txt
@@ -0,0 +1,30 @@
+NXP LPC32xx Clock Controller
+
+Required properties:
+- compatible: should be "nxp,lpc3220-clk"
+- reg:  should contain clock controller registers location and length
+- #clock-cells: must be 1, the cell holds id of a clock provided by the
+  clock controller
+- clocks: phandles of external oscillators, the list must contain one
+  32768 Hz oscillator and may have one optional high frequency oscillator
+- clock-names: list of external oscillator clock names, must contain
+  "xtal_32k" and may have optional "xtal"
+
+Examples:
+
+	/* System Control Block */
+	scb {
+		compatible = "simple-bus";
+		ranges = <0x0 0x040004000 0x00001000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		clk: clock-controller@0 {
+			compatible = "nxp,lpc3220-clk";
+			reg = <0x00 0x114>;
+			#clock-cells = <1>;
+
+			clocks = <&xtal_32k>, <&xtal>;
+			clock-names = "xtal_32k", "xtal";
+		};
+	};
diff --git a/Bindings/clock/nxp,lpc3220-usb-clk.txt b/Bindings/clock/nxp,lpc3220-usb-clk.txt
new file mode 100644
index 0000000..0aa2494
--- /dev/null
+++ b/Bindings/clock/nxp,lpc3220-usb-clk.txt
@@ -0,0 +1,22 @@
+NXP LPC32xx USB Clock Controller
+
+Required properties:
+- compatible: should be "nxp,lpc3220-usb-clk"
+- reg:  should contain clock controller registers location and length
+- #clock-cells: must be 1, the cell holds id of a clock provided by the
+  USB clock controller
+
+Examples:
+
+	usb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x0 0x31020000 0x00001000>;
+
+		usbclk: clock-controller@f00 {
+			compatible = "nxp,lpc3220-usb-clk";
+			reg = <0xf00 0x100>;
+			#clock-cells = <1>;
+		};
+	};
diff --git a/Bindings/clock/pistachio-clock.txt b/Bindings/clock/pistachio-clock.txt
new file mode 100644
index 0000000..868db49
--- /dev/null
+++ b/Bindings/clock/pistachio-clock.txt
@@ -0,0 +1,123 @@
+Imagination Technologies Pistachio SoC clock controllers
+========================================================
+
+Pistachio has four clock controllers (core clock, peripheral clock, peripheral
+general control, and top general control) which are instantiated individually
+from the device-tree.
+
+External clocks:
+----------------
+
+There are three external inputs to the clock controllers which should be
+defined with the following clock-output-names:
+- "xtal": External 52Mhz oscillator (required)
+- "audio_clk_in": Alternate audio reference clock (optional)
+- "enet_clk_in": Alternate ethernet PHY clock (optional)
+
+Core clock controller:
+----------------------
+
+The core clock controller generates clocks for the CPU, RPU (WiFi + BT
+co-processor), audio, and several peripherals.
+
+Required properties:
+- compatible: Must be "img,pistachio-clk".
+- reg: Must contain the base address and length of the core clock controller.
+- #clock-cells: Must be 1.  The single cell is the clock identifier.
+  See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
+- clocks: Must contain an entry for each clock in clock-names.
+- clock-names: Must include "xtal" (see "External clocks") and
+  "audio_clk_in_gate", "enet_clk_in_gate" which are generated by the
+  top-level general control.
+
+Example:
+	clk_core: clock-controller@18144000 {
+		compatible = "img,pistachio-clk";
+		reg = <0x18144000 0x800>;
+		clocks = <&xtal>, <&cr_top EXT_CLK_AUDIO_IN>,
+			 <&cr_top EXT_CLK_ENET_IN>;
+		clock-names = "xtal", "audio_clk_in_gate", "enet_clk_in_gate";
+
+		#clock-cells = <1>;
+	};
+
+Peripheral clock controller:
+----------------------------
+
+The peripheral clock controller generates clocks for the DDR, ROM, and other
+peripherals.  The peripheral system clock ("periph_sys") generated by the core
+clock controller is the input clock to the peripheral clock controller.
+
+Required properties:
+- compatible: Must be "img,pistachio-periph-clk".
+- reg: Must contain the base address and length of the peripheral clock
+  controller.
+- #clock-cells: Must be 1.  The single cell is the clock identifier.
+  See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
+- clocks: Must contain an entry for each clock in clock-names.
+- clock-names: Must include "periph_sys", the peripheral system clock generated
+  by the core clock controller.
+
+Example:
+	clk_periph: clock-controller@18144800 {
+		compatible = "img,pistachio-clk-periph";
+		reg = <0x18144800 0x800>;
+		clocks = <&clk_core CLK_PERIPH_SYS>;
+		clock-names = "periph_sys";
+
+		#clock-cells = <1>;
+	};
+
+Peripheral general control:
+---------------------------
+
+The peripheral general control block generates system interface clocks and
+resets for various peripherals.  It also contains miscellaneous peripheral
+control registers.  The system clock ("sys") generated by the peripheral clock
+controller is the input clock to the system clock controller.
+
+Required properties:
+- compatible: Must include "img,pistachio-periph-cr" and "syscon".
+- reg: Must contain the base address and length of the peripheral general
+  control registers.
+- #clock-cells: Must be 1.  The single cell is the clock identifier.
+  See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
+- clocks: Must contain an entry for each clock in clock-names.
+- clock-names: Must include "sys", the system clock generated by the peripheral
+  clock controller.
+
+Example:
+	cr_periph: syscon@18144800 {
+		compatible = "img,pistachio-cr-periph", "syscon";
+		reg = <0x18148000 0x1000>;
+		clocks = <&clock_periph PERIPH_CLK_PERIPH_SYS>;
+		clock-names = "sys";
+
+		#clock-cells = <1>;
+	};
+
+Top-level general control:
+--------------------------
+
+The top-level general control block contains miscellaneous control registers and
+gates for the external clocks "audio_clk_in" and "enet_clk_in".
+
+Required properties:
+- compatible: Must include "img,pistachio-cr-top" and "syscon".
+- reg: Must contain the base address and length of the top-level
+  control registers.
+- clocks: Must contain an entry for each clock in clock-names.
+- clock-names: Two optional clocks, "audio_clk_in" and "enet_clk_in" (see
+  "External clocks").
+- #clock-cells: Must be 1.  The single cell is the clock identifier.
+  See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
+
+Example:
+	cr_top: syscon@18144800 {
+		compatible = "img,pistachio-cr-top", "syscon";
+		reg = <0x18149000 0x200>;
+		clocks = <&audio_refclk>, <&ext_enet_in>;
+		clock-names = "audio_clk_in", "enet_clk_in";
+
+		#clock-cells = <1>;
+	};
diff --git a/Bindings/clock/pwm-clock.yaml b/Bindings/clock/pwm-clock.yaml
new file mode 100644
index 0000000..f88ecb2
--- /dev/null
+++ b/Bindings/clock/pwm-clock.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/pwm-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: An external clock signal driven by a PWM pin.
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+properties:
+  compatible:
+    const: pwm-clock
+
+  '#clock-cells':
+    const: 0
+
+  clock-frequency:
+    description: Exact output frequency, in case the PWM period is not exact
+      but was rounded to nanoseconds.
+
+  clock-output-names:
+    maxItems: 1
+
+  pwms:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    clock {
+        compatible = "pwm-clock";
+        #clock-cells = <0>;
+        clock-frequency = <25000000>;
+        clock-output-names = "mipi_mclk";
+        pwms = <&pwm2 0 40>; /* 1 / 40 ns = 25 MHz */
+    };
+...
diff --git a/Bindings/clock/pxa-clock.txt b/Bindings/clock/pxa-clock.txt
new file mode 100644
index 0000000..8f67239
--- /dev/null
+++ b/Bindings/clock/pxa-clock.txt
@@ -0,0 +1,15 @@
+* Clock bindings for Marvell PXA chips
+
+Required properties:
+- compatible: Should be "marvell,pxa-clocks"
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell (see include/.../pxa-clock.h).
+
+Examples:
+
+pxa2xx_clks: pxa2xx_clks@41300004 {
+        compatible = "marvell,pxa-clocks";
+        #clock-cells = <1>;
+};
diff --git a/Bindings/clock/qca,ath79-pll.txt b/Bindings/clock/qca,ath79-pll.txt
new file mode 100644
index 0000000..241fb05
--- /dev/null
+++ b/Bindings/clock/qca,ath79-pll.txt
@@ -0,0 +1,33 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX PLL controller
+
+The PPL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB.
+
+Required Properties:
+- compatible: has to be "qca,<soctype>-pll" and one of the following
+  fallbacks:
+  - "qca,ar7100-pll"
+  - "qca,ar7240-pll"
+  - "qca,ar9130-pll"
+  - "qca,ar9330-pll"
+  - "qca,ar9340-pll"
+  - "qca,qca9550-pll"
+- reg: Base address and size of the controllers memory area
+- clock-names: Name of the input clock, has to be "ref"
+- clocks: phandle of the external reference clock
+- #clock-cells: has to be one
+
+Optional properties:
+- clock-output-names: should be "cpu", "ddr", "ahb"
+
+Example:
+
+	pll-controller@18050000 {
+		compatible = "qca,ar9132-pll", "qca,ar9130-pll";
+		reg = <0x18050000 0x20>;
+
+		clock-names = "ref";
+		clocks = <&extosc>;
+
+		#clock-cells = <1>;
+		clock-output-names = "cpu", "ddr", "ahb";
+	};
diff --git a/Bindings/clock/qcom,a53pll.yaml b/Bindings/clock/qcom,a53pll.yaml
new file mode 100644
index 0000000..9436266
--- /dev/null
+++ b/Bindings/clock/qcom,a53pll.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,a53pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm A53 PLL clock
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  The A53 PLL on few Qualcomm platforms is the main CPU PLL used used for
+  frequencies above 1GHz.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq5332-a53pll
+      - qcom,ipq6018-a53pll
+      - qcom,ipq8074-a53pll
+      - qcom,ipq9574-a73pll
+      - qcom,msm8916-a53pll
+      - qcom,msm8939-a53pll
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    items:
+      - description: board XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  operating-points-v2: true
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Example 1 - A53 PLL found on MSM8916 devices
+  - |
+    a53pll: clock@b016000 {
+        compatible = "qcom,msm8916-a53pll";
+        reg = <0xb016000 0x40>;
+        #clock-cells = <0>;
+    };
+  # Example 2 - A53 PLL found on IPQ6018 devices
+  - |
+    a53pll_ipq: clock-controller@b116000 {
+        compatible = "qcom,ipq6018-a53pll";
+        reg = <0x0b116000 0x40>;
+        #clock-cells = <0>;
+        clocks = <&xo>;
+        clock-names = "xo";
+    };
diff --git a/Bindings/clock/qcom,a7pll.yaml b/Bindings/clock/qcom,a7pll.yaml
new file mode 100644
index 0000000..809c34e
--- /dev/null
+++ b/Bindings/clock/qcom,a7pll.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,a7pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm A7 PLL clock
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  The A7 PLL on the Qualcomm platforms like SDX55, SDX65 is used to provide high
+  frequency clock to the CPU.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdx55-a7pll
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    items:
+      - description: board XO clock
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    a7pll: clock@17808000 {
+        compatible = "qcom,sdx55-a7pll";
+        reg = <0x17808000 0x1000>;
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "bi_tcxo";
+        #clock-cells = <0>;
+    };
diff --git a/Bindings/clock/qcom,aoncc-sm8250.yaml b/Bindings/clock/qcom,aoncc-sm8250.yaml
new file mode 100644
index 0000000..8b8932b
--- /dev/null
+++ b/Bindings/clock/qcom,aoncc-sm8250.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,aoncc-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPASS Always ON Clock Controller on SM8250 SoCs
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell.
+  See include/dt-bindings/clock/qcom,sm8250-lpass-aoncc.h for the full list
+  of Audio Clock controller clock IDs.
+
+properties:
+  compatible:
+    const: qcom,sm8250-lpass-aoncc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio codec voting clock
+      - description: Glitch Free Mux register clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+      - const: bus
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h>
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    clock-controller@3800000 {
+      #clock-cells = <1>;
+      compatible = "qcom,sm8250-lpass-aoncc";
+      reg = <0x03380000 0x40000>;
+      clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+      clock-names = "core", "audio", "bus";
+    };
diff --git a/Bindings/clock/qcom,audiocc-sm8250.yaml b/Bindings/clock/qcom,audiocc-sm8250.yaml
new file mode 100644
index 0000000..cfca888
--- /dev/null
+++ b/Bindings/clock/qcom,audiocc-sm8250.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,audiocc-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPASS Audio Clock Controller on SM8250 SoCs
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell.
+  See include/dt-bindings/clock/qcom,sm8250-lpass-audiocc.h for the full list
+  of Audio Clock controller clock IDs.
+
+properties:
+  compatible:
+    const: qcom,sm8250-lpass-audiocc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio codec voting clock
+      - description: Glitch Free Mux register clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+      - const: bus
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h>
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    clock-controller@3300000 {
+      #clock-cells = <1>;
+      compatible = "qcom,sm8250-lpass-audiocc";
+      reg = <0x03300000 0x30000>;
+      clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+      clock-names = "core", "audio", "bus";
+    };
diff --git a/Bindings/clock/qcom,camcc-sm8250.yaml b/Bindings/clock/qcom,camcc-sm8250.yaml
new file mode 100644
index 0000000..426335a
--- /dev/null
+++ b/Bindings/clock/qcom,camcc-sm8250.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,camcc-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM8250
+
+maintainers:
+  - Jonathan Marek <jonathan@marek.ca>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and
+  power domains on SM8250.
+
+  See also:: include/dt-bindings/clock/qcom,camcc-sm8250.h
+
+properties:
+  compatible:
+    const: qcom,sm8250-camcc
+
+  clocks:
+    items:
+      - description: AHB
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    items:
+      - description: MMCX power domain
+
+  reg:
+    maxItems: 1
+
+  required-opps:
+    maxItems: 1
+    description:
+      OPP node describing required MMCX performance point.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sm8250-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,dispcc-sc8280xp.yaml b/Bindings/clock/qcom,dispcc-sc8280xp.yaml
new file mode 100644
index 0000000..3cb996b
--- /dev/null
+++ b/Bindings/clock/qcom,dispcc-sc8280xp.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SC8280XP
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains for the two MDSS instances on SC8280XP.
+
+  See also:
+    include/dt-bindings/clock/qcom,dispcc-sc8280xp.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-dispcc0
+      - qcom,sc8280xp-dispcc1
+
+  clocks:
+    items:
+      - description: AHB interface clock,
+      - description: SoC CXO clock
+      - description: SoC sleep clock
+      - description: DisplayPort 0 link clock
+      - description: DisplayPort 0 VCO div clock
+      - description: DisplayPort 1 link clock
+      - description: DisplayPort 1 VCO div clock
+      - description: DisplayPort 2 link clock
+      - description: DisplayPort 2 VCO div clock
+      - description: DisplayPort 3 link clock
+      - description: DisplayPort 3 VCO div clock
+      - description: DSI 0 PLL byte clock
+      - description: DSI 0 PLL DSI clock
+      - description: DSI 1 PLL byte clock
+      - description: DSI 1 PLL DSI clock
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: MMCX power domain
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sc8280xp-dispcc0";
+      reg = <0x0af00000 0x20000>;
+      clocks = <&gcc GCC_DISP_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>,
+               <&mdss0_dp_phy0 0>,
+               <&mdss0_dp_phy0 1>,
+               <&mdss0_dp_phy1 0>,
+               <&mdss0_dp_phy1 1>,
+               <&mdss0_dp_phy2 0>,
+               <&mdss0_dp_phy2 1>,
+               <&mdss0_dp_phy3 0>,
+               <&mdss0_dp_phy3 1>,
+               <&mdss0_dsi0_phy 0>,
+               <&mdss0_dsi0_phy 1>,
+               <&mdss0_dsi1_phy 0>,
+               <&mdss0_dsi1_phy 1>;
+      power-domains = <&rpmhpd SC8280XP_MMCX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,dispcc-sm6125.yaml b/Bindings/clock/qcom,dispcc-sm6125.yaml
new file mode 100644
index 0000000..0a3ef7f
--- /dev/null
+++ b/Bindings/clock/qcom,dispcc-sm6125.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6125.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock Controller on SM6125
+
+maintainers:
+  - Martin Botka <martin.botka@somainline.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks and power domains
+  on SM6125.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-sm6125.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6125-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+      - description: AHB config clock from GCC
+      - description: GPLL0 div source from GCC
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dsi1_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+      - const: cfg_ahb_clk
+      - const: gcc_disp_gpll0_div_clk_src
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the CX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing the power domain's performance point.
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6125.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6125-dispcc";
+      reg = <0x5f00000 0x20000>;
+
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+      clock-names = "bi_tcxo",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dsi1_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk",
+                    "cfg_ahb_clk",
+                    "gcc_disp_gpll0_div_clk_src";
+
+      required-opps = <&rpmhpd_opp_ret>;
+      power-domains = <&rpmpd SM6125_VDDCX>;
+
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,dispcc-sm6350.yaml b/Bindings/clock/qcom,dispcc-sm6350.yaml
new file mode 100644
index 0000000..8efac3f
--- /dev/null
+++ b/Bindings/clock/qcom,dispcc-sm6350.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SM6350
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM6350.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-sm6350.h
+
+properties:
+  compatible:
+    const: qcom,sm6350-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm6350-dispcc";
+      reg = <0x0af00000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,dispcc-sm8x50.yaml b/Bindings/clock/qcom,dispcc-sm8x50.yaml
new file mode 100644
index 0000000..59cc88a
--- /dev/null
+++ b/Bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SM8150/SM8250/SM8350
+
+maintainers:
+  - Jonathan Marek <jonathan@marek.ca>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM8150/SM8250/SM8350.
+
+  See also::
+    include/dt-bindings/clock/qcom,dispcc-sm8150.h
+    include/dt-bindings/clock/qcom,dispcc-sm8250.h
+    include/dt-bindings/clock/qcom,dispcc-sm8350.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8180x-dispcc
+      - qcom,sm8150-dispcc
+      - qcom,sm8250-dispcc
+      - qcom,sm8350-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dsi1_phy_pll_out_byteclk
+      - const: dsi1_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm8250-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dsi1_phy_pll_out_byteclk",
+                    "dsi1_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-apq8064.yaml b/Bindings/clock/qcom,gcc-apq8064.yaml
new file mode 100644
index 0000000..1921117
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-apq8064.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-apq8064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on APQ8064/MSM8960
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on APQ8064.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8960.h
+    include/dt-bindings/reset/qcom,gcc-msm8960.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,gcc-apq8064
+              - qcom,gcc-msm8960
+          - const: syscon
+      - enum:
+          - qcom,gcc-apq8064
+          - qcom,gcc-msm8960
+        deprecated: true
+
+  thermal-sensor:
+    description: child tsens device
+    $ref: /schemas/thermal/qcom-tsens.yaml#
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: cxo
+      - const: pxo
+      - const: pll4
+
+  nvmem-cells:
+    minItems: 1
+    maxItems: 2
+    deprecated: true
+    description:
+      Qualcomm TSENS (thermal sensor device) on some devices can
+      be part of GCC and hence the TSENS properties can also be part
+      of the GCC/clock-controller node.
+      For more details on the TSENS properties please refer
+      Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+
+  nvmem-cell-names:
+    minItems: 1
+    deprecated: true
+    items:
+      - const: calib
+      - const: calib_backup
+
+  '#thermal-sensor-cells':
+    const: 1
+    deprecated: true
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-apq8064", "syscon";
+      reg = <0x00900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+
+      thermal-sensor {
+        compatible = "qcom,msm8960-tsens";
+
+        nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <0 178 4>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
+      };
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-apq8084.yaml b/Bindings/clock/qcom,gcc-apq8084.yaml
new file mode 100644
index 0000000..d846082
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-apq8084.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-apq8084.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on APQ8084
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on APQ8084.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-apq8084.h
+    include/dt-bindings/reset/qcom,gcc-apq8084.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,gcc-apq8084
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: UFS RX symbol 0 clock
+      - description: UFS RX symbol 1 clock
+      - description: UFS TX symbol 0 clock
+      - description: UFS TX symbol 1 clock
+      - description: SATA ASIC0 clock
+      - description: SATA RX clock
+      - description: PCIe PIPE clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: ufs_rx_symbol_0_clk_src
+      - const: ufs_rx_symbol_1_clk_src
+      - const: ufs_tx_symbol_0_clk_src
+      - const: ufs_tx_symbol_1_clk_src
+      - const: sata_asic0_clk
+      - const: sata_rx_clk
+      - const: pcie_pipe
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /* UFS PHY on APQ8084 is not supported (yet), so these bindings just serve an example */
+    clock-controller@fc400000 {
+        compatible = "qcom,gcc-apq8084";
+        reg = <0xfc400000 0x4000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+
+        clocks = <&xo_board>,
+                 <&sleep_clk>,
+                 <&ufsphy 0>,
+                 <&ufsphy 1>,
+                 <&ufsphy 2>,
+                 <&ufsphy 3>,
+                 <&sata 0>,
+                 <&sata 1>,
+                 <&pcie_phy>;
+        clock-names = "xo",
+                      "sleep_clk",
+                      "ufs_rx_symbol_0_clk_src",
+                      "ufs_rx_symbol_1_clk_src",
+                      "ufs_tx_symbol_0_clk_src",
+                      "ufs_tx_symbol_1_clk_src",
+                      "sata_asic0_clk",
+                      "sata_rx_clk",
+                      "pcie_pipe";
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-ipq4019.yaml b/Bindings/clock/qcom,gcc-ipq4019.yaml
new file mode 100644
index 0000000..fb3957d
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-ipq4019.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq4019.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ4019
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+  - Robert Marko <robert.markoo@sartura.hr>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ4019.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-ipq4019.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,gcc-ipq4019
+
+  clocks:
+    items:
+      - description: board XO clock
+      - description: sleep clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-ipq4019";
+      reg = <0x1800000 0x60000>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+      clocks = <&xo>, <&sleep_clk>;
+      clock-names = "xo", "sleep_clk";
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-ipq8064.yaml b/Bindings/clock/qcom,gcc-ipq8064.yaml
new file mode 100644
index 0000000..93f3084
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-ipq8064.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ8064
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ8064.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+    include/dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,gcc-ipq8064
+      - const: syscon
+
+  clocks:
+    minItems: 2
+    items:
+      - description: PXO source
+      - description: CXO source
+      - description: PLL4 from LCC
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pxo
+      - const: cxo
+      - const: pll4
+
+  thermal-sensor:
+    type: object
+
+    allOf:
+      - $ref: /schemas/thermal/qcom-tsens.yaml#
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gcc: clock-controller@900000 {
+      compatible = "qcom,gcc-ipq8064", "syscon";
+      reg = <0x00900000 0x4000>;
+      clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>;
+      clock-names = "pxo", "cxo", "pll4";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+
+      tsens: thermal-sensor {
+        compatible = "qcom,ipq8064-tsens";
+
+        nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
+      };
+    };
diff --git a/Bindings/clock/qcom,gcc-ipq8074.yaml b/Bindings/clock/qcom,gcc-ipq8074.yaml
new file mode 100644
index 0000000..52e7831
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-ipq8074.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8074.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ8074
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ8074.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-ipq8074.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,gcc-ipq8074
+
+  clocks:
+    items:
+      - description: board XO clock
+      - description: sleep clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-ipq8074";
+      reg = <0x01800000 0x80000>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-msm8660.yaml b/Bindings/clock/qcom,gcc-msm8660.yaml
new file mode 100644
index 0000000..c9e9855
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-msm8660.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8660
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks and resets on
+  MSM8660
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8660.h
+    include/dt-bindings/reset/qcom,gcc-msm8660.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8660
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pxo
+      - const: cxo
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for MSM8974:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-msm8660";
+      reg = <0x900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      clocks = <&pxo_board>, <&cxo_board>;
+      clock-names = "pxo", "cxo";
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-msm8909.yaml b/Bindings/clock/qcom,gcc-msm8909.yaml
new file mode 100644
index 0000000..b914625
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-msm8909.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8909.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8909, MSM8917 and QM215
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8909, MSM8917 or QM215.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8909.h
+    include/dt-bindings/clock/qcom,gcc-msm8917.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8909
+      - qcom,gcc-msm8917
+      - qcom,gcc-qm215
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: dsi0pll
+      - const: dsi0pllbyte
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gcc: clock-controller@1800000 {
+      compatible = "qcom,gcc-msm8909";
+      reg = <0x01800000 0x80000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      clocks = <&xo_board>, <&sleep_clk>, <&dsi0_phy 1>, <&dsi0_phy 0>;
+      clock-names = "xo", "sleep_clk", "dsi0pll", "dsi0pllbyte";
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-msm8916.yaml b/Bindings/clock/qcom,gcc-msm8916.yaml
new file mode 100644
index 0000000..ad84c0f
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-msm8916.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8916.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8916 and MSM8939
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8916 or MSM8939.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8916.h
+    include/dt-bindings/clock/qcom,gcc-msm8939.h
+    include/dt-bindings/reset/qcom,gcc-msm8916.h
+    include/dt-bindings/reset/qcom,gcc-msm8939.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8916
+      - qcom,gcc-msm8939
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+      - description: External MCLK clock
+      - description: External Primary I2S clock
+      - description: External Secondary I2S clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: ext_mclk
+      - const: ext_pri_i2s
+      - const: ext_sec_i2s
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@300000 {
+      compatible = "qcom,gcc-msm8916";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x300000 0x90000>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-msm8953.yaml b/Bindings/clock/qcom,gcc-msm8953.yaml
new file mode 100644
index 0000000..fe9fd4c
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-msm8953.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8953.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8953
+
+maintainers:
+  - Adam Skladowski <a_skl39@protonmail.com>
+  - Sireesh Kodali <sireeshkodali@protonmail.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8953.
+
+  See also: include/dt-bindings/clock/qcom,gcc-msm8953.h
+
+properties:
+  compatible:
+    const: qcom,gcc-msm8953
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: dsi1pll
+      - const: dsi1pllbyte
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    clock-controller@1800000 {
+        compatible = "qcom,gcc-msm8953";
+        reg = <0x01800000 0x80000>;
+        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                 <&sleep_clk>,
+                 <&dsi0_phy 1>,
+                 <&dsi0_phy 0>,
+                 <&dsi1_phy 1>,
+                 <&dsi1_phy 0>;
+        clock-names = "xo",
+                      "sleep",
+                      "dsi0pll",
+                      "dsi0pllbyte",
+                      "dsi1pll",
+                      "dsi1pllbyte";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+    };
diff --git a/Bindings/clock/qcom,gcc-msm8974.yaml b/Bindings/clock/qcom,gcc-msm8974.yaml
new file mode 100644
index 0000000..1927aec
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-msm8974.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8974.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8974 (including Pro) and MSM8226
+  Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8974 (all variants) and MSM8226.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
+    include/dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
+
+$ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8226
+      - qcom,gcc-msm8974
+      - qcom,gcc-msm8974pro
+      - qcom,gcc-msm8974pro-ac
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@fc400000 {
+        compatible = "qcom,gcc-msm8974";
+        reg = <0x00100000 0x94000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+
+        clock-names = "xo", "sleep_clk";
+        clocks = <&xo_board>,
+                 <&sleep_clk>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-msm8976.yaml b/Bindings/clock/qcom,gcc-msm8976.yaml
new file mode 100644
index 0000000..62d6f1f
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-msm8976.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8976.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8976
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8976.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-msm8976.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8976
+      - qcom,gcc-msm8976-v1.1
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Always-on XO source
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY1
+      - description: Byte clock from DSI PHY1
+
+  clock-names:
+    items:
+      - const: xo
+      - const: xo_a
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: dsi1pll
+      - const: dsi1pllbyte
+
+  vdd_gfx-supply:
+    description:
+      Phandle to voltage regulator providing power to the GX domain.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - vdd_gfx-supply
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-msm8976";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x1800000 0x80000>;
+
+      clocks = <&xo_board>,
+               <&xo_board>,
+               <&dsi0_phy 1>,
+               <&dsi0_phy 0>,
+               <&dsi1_phy 1>,
+               <&dsi1_phy 0>;
+
+      clock-names = "xo",
+                    "xo_a",
+                    "dsi0pll",
+                    "dsi0pllbyte",
+                    "dsi1pll",
+                    "dsi1pllbyte";
+
+      vdd_gfx-supply = <&pm8004_s5>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-msm8994.yaml b/Bindings/clock/qcom,gcc-msm8994.yaml
new file mode 100644
index 0000000..8f0f20c
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-msm8994.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8994.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8994
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8994 and MSM8992.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-msm8994.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8992
+      - qcom,gcc-msm8994
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@300000 {
+      compatible = "qcom,gcc-msm8994";
+      reg = <0x00300000 0x90000>;
+      clocks = <&xo_board>, <&sleep_clk>;
+      clock-names = "xo", "sleep";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/qcom,gcc-msm8996.yaml b/Bindings/clock/qcom,gcc-msm8996.yaml
new file mode 100644
index 0000000..97523cc
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-msm8996.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8996.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8996
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which provides the clocks, resets and
+  power domains on MSM8996.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-msm8996.h
+
+properties:
+  compatible:
+    const: qcom,gcc-msm8996
+
+  clocks:
+    minItems: 3
+    items:
+      - description: XO source
+      - description: Second XO source
+      - description: Sleep clock source
+      - description: PCIe 0 PIPE clock (optional)
+      - description: PCIe 1 PIPE clock (optional)
+      - description: PCIe 2 PIPE clock (optional)
+      - description: USB3 PIPE clock (optional)
+      - description: UFS RX symbol 0 clock (optional)
+      - description: UFS RX symbol 1 clock (optional)
+      - description: UFS TX symbol 0 clock (optional)
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: cxo
+      - const: cxo2
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk_src
+      - const: pcie_1_pipe_clk_src
+      - const: pcie_2_pipe_clk_src
+      - const: usb3_phy_pipe_clk_src
+      - const: ufs_rx_symbol_0_clk_src
+      - const: ufs_rx_symbol_1_clk_src
+      - const: ufs_tx_symbol_0_clk_src
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@300000 {
+      compatible = "qcom,gcc-msm8996";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x300000 0x90000>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-msm8998.yaml b/Bindings/clock/qcom,gcc-msm8998.yaml
new file mode 100644
index 0000000..58f7fb2
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-msm8998.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8998.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8998
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8998.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-msm8998.h
+
+properties:
+  compatible:
+    const: qcom,gcc-msm8998
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: Audio reference clock (Optional clock)
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: aud_ref_clk # Optional clock
+    minItems: 2
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-msm8998";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x00100000 0xb0000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&sleep>,
+               <0>;
+      clock-names = "xo",
+                    "sleep_clk",
+                    "aud_ref_clk";
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-other.yaml b/Bindings/clock/qcom,gcc-other.yaml
new file mode 100644
index 0000000..559fc21
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-other.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-other.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-ipq6018.h
+    include/dt-bindings/reset/qcom,gcc-ipq6018.h
+    include/dt-bindings/clock/qcom,gcc-msm8953.h
+    include/dt-bindings/clock/qcom,gcc-mdm9607.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-ipq6018
+      - qcom,gcc-mdm9607
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-mdm9607";
+      reg = <0x900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-qcm2290.yaml b/Bindings/clock/qcom,gcc-qcm2290.yaml
new file mode 100644
index 0000000..c9bec46
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-qcm2290.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-qcm2290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on QCM2290
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on QCM2290.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-qcm2290.h
+
+properties:
+  compatible:
+    const: qcom,gcc-qcm2290
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@1400000 {
+        compatible = "qcom,gcc-qcm2290";
+        reg = <0x01400000 0x1f0000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+        clock-names = "bi_tcxo", "sleep_clk";
+        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-qcs404.yaml b/Bindings/clock/qcom,gcc-qcs404.yaml
new file mode 100644
index 0000000..7bc6c57
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-qcs404.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-qcs404.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on QCS404
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on QCS404.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-qcs404.h
+
+properties:
+  compatible:
+    const: qcom,gcc-qcs404
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: PCIe 0 PIPE clock (optional)
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+      - description: HDMI phy PLL clock
+
+  clock-names:
+    items:
+      - const: cxo
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk_src
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: hdmi_pll
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-qcs404";
+      reg = <0x01800000 0x80000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-sc7180.yaml b/Bindings/clock/qcom,gcc-sc7180.yaml
new file mode 100644
index 0000000..7aae21a
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-sc7180.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sc7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SC7180
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SC7180.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sc7180.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sc7180
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+  power-domains:
+    items:
+      - description: CX domain
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sc7180";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      power-domains = <&rpmhpd SC7180_CX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-sc7280.yaml b/Bindings/clock/qcom,gcc-sc7280.yaml
new file mode 100644
index 0000000..c4ca08d
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-sc7280.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sc7280.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SC7280
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SC7280.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sc7280.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sc7280
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+      - description: PCIE-0 pipe clock source
+      - description: PCIE-1 pipe clock source
+      - description: USF phy rx symbol 0 clock source
+      - description: USF phy rx symbol 1 clock source
+      - description: USF phy tx symbol 0 clock source
+      - description: USB30 phy wrapper pipe clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk
+      - const: pcie_1_pipe_clk
+      - const: ufs_phy_rx_symbol_0_clk
+      - const: ufs_phy_rx_symbol_1_clk
+      - const: ufs_phy_tx_symbol_0_clk
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk
+
+  power-domains:
+    items:
+      - description: CX domain
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sc7280";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>,
+               <&pcie_0_pipe_clk>, <&pcie_1_pipe_clk>,
+               <&ufs_phy_rx_symbol_0_clk>, <&ufs_phy_rx_symbol_1_clk>,
+               <&ufs_phy_tx_symbol_0_clk>,
+               <&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
+
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk",
+                     "pcie_1_pipe_clk", "ufs_phy_rx_symbol_0_clk",
+                     "ufs_phy_rx_symbol_1_clk", "ufs_phy_tx_symbol_0_clk",
+                     "usb3_phy_wrapper_gcc_usb30_pipe_clk";
+      power-domains = <&rpmhpd SC7280_CX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-sc8180x.yaml b/Bindings/clock/qcom,gcc-sc8180x.yaml
new file mode 100644
index 0000000..6c4846b
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-sc8180x.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8180x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SC8180x
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SC8180x.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sc8180x.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sc8180x
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sc8180x";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-sc8280xp.yaml b/Bindings/clock/qcom,gcc-sc8280xp.yaml
new file mode 100644
index 0000000..5681e53
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-sc8280xp.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SC8280xp
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and
+  power domains on SC8280xp.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sc8280xp.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sc8280xp
+
+  clocks:
+    items:
+      - description: XO reference clock
+      - description: Sleep clock
+      - description: UFS memory first RX symbol clock
+      - description: UFS memory second RX symbol clock
+      - description: UFS memory first TX symbol clock
+      - description: UFS card first RX symbol clock
+      - description: UFS card second RX symbol clock
+      - description: UFS card first TX symbol clock
+      - description: Primary USB SuperSpeed pipe clock
+      - description: USB4 PHY pipegmux clock source
+      - description: USB4 PHY DP gmux clock source
+      - description: USB4 PHY sys pipegmux clock source
+      - description: USB4 PHY PCIe pipe clock
+      - description: USB4 PHY router max pipe clock
+      - description: Primary USB4 RX0 clock
+      - description: Primary USB4 RX1 clock
+      - description: Secondary USB SuperSpeed pipe clock
+      - description: Second USB4 PHY pipegmux clock source
+      - description: Second USB4 PHY DP gmux clock source
+      - description: Second USB4 PHY sys pipegmux clock source
+      - description: Second USB4 PHY PCIe pipe clock
+      - description: Second USB4 PHY router max pipe clock
+      - description: Secondary USB4 RX0 clock
+      - description: Secondary USB4 RX1 clock
+      - description: Multiport USB first SuperSpeed pipe clock
+      - description: Multiport USB second SuperSpeed pipe clock
+      - description: PCIe 2a pipe clock
+      - description: PCIe 2b pipe clock
+      - description: PCIe 3a pipe clock
+      - description: PCIe 3b pipe clock
+      - description: PCIe 4 pipe clock
+      - description: First EMAC controller reference clock
+      - description: Second EMAC controller reference clock
+
+  power-domains:
+    items:
+      - description: CX domain
+
+  protected-clocks:
+    maxItems: 389
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sc8280xp";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>,
+               <&ufs_phy_rx_symbol_0_clk>,
+               <&ufs_phy_rx_symbol_1_clk>,
+               <&ufs_phy_tx_symbol_0_clk>,
+               <&ufs_card_rx_symbol_0_clk>,
+               <&ufs_card_rx_symbol_1_clk>,
+               <&ufs_card_tx_symbol_0_clk>,
+               <&usb_0_ssphy>,
+               <&gcc_usb4_phy_pipegmux_clk_src>,
+               <&gcc_usb4_phy_dp_gmux_clk_src>,
+               <&gcc_usb4_phy_sys_pipegmux_clk_src>,
+               <&usb4_phy_gcc_usb4_pcie_pipe_clk>,
+               <&usb4_phy_gcc_usb4rtr_max_pipe_clk>,
+               <&qusb4phy_gcc_usb4_rx0_clk>,
+               <&qusb4phy_gcc_usb4_rx1_clk>,
+               <&usb_1_ssphy>,
+               <&gcc_usb4_1_phy_pipegmux_clk_src>,
+               <&gcc_usb4_1_phy_dp_gmux_clk_src>,
+               <&gcc_usb4_1_phy_sys_pipegmux_clk_src>,
+               <&usb4_1_phy_gcc_usb4_pcie_pipe_clk>,
+               <&usb4_1_phy_gcc_usb4rtr_max_pipe_clk>,
+               <&qusb4phy_1_gcc_usb4_rx0_clk>,
+               <&qusb4phy_1_gcc_usb4_rx1_clk>,
+               <&usb_2_ssphy>,
+               <&usb_3_ssphy>,
+               <&pcie2a_lane>,
+               <&pcie2b_lane>,
+               <&pcie3a_lane>,
+               <&pcie3b_lane>,
+               <&pcie4_lane>,
+               <&rxc0_ref_clk>,
+               <&rxc1_ref_clk>;
+      power-domains = <&rpmhpd SC8280XP_CX>;
+
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-sdm660.yaml b/Bindings/clock/qcom,gcc-sdm660.yaml
new file mode 100644
index 0000000..52e7412
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-sdm660.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdm660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM660/SDM630/SDM636 Global Clock & Reset Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDM630, SDM636 and SDM660
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
+
+$ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-sdm630
+      - qcom,gcc-sdm660
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for SDM660:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+        compatible = "qcom,gcc-sdm660";
+        reg = <0x00100000 0x94000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+
+        clock-names = "xo", "sleep_clk";
+        clocks = <&xo_board>,
+                 <&sleep_clk>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-sdm845.yaml b/Bindings/clock/qcom,gcc-sdm845.yaml
new file mode 100644
index 0000000..0595da0
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-sdm845.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdm845.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SDM670 and SDM845
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDM670 and SDM845
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sdm845.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-sdm670
+      - qcom,gcc-sdm845
+
+  clocks:
+    minItems: 3
+    maxItems: 5
+
+  clock-names:
+    minItems: 3
+    maxItems: 5
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,gcc-sdm670
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+            - description: Sleep clock source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: sleep_clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,gcc-sdm845
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+            - description: Sleep clock source
+            - description: PCIE 0 Pipe clock source
+            - description: PCIE 1 Pipe clock source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: sleep_clk
+            - const: pcie_0_pipe_clk
+            - const: pcie_1_pipe_clk
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for SDM845:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sdm845";
+      reg = <0x100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>,
+               <&pcie0_lane>,
+               <&pcie1_lane>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk", "pcie_1_pipe_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-sdx55.yaml b/Bindings/clock/qcom,gcc-sdx55.yaml
new file mode 100644
index 0000000..428e954
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-sdx55.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdx55.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SDX55
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and
+  power domains on SDX55
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sdx55.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sdx55
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sdx55";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo",
+                    "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/qcom,gcc-sdx65.yaml b/Bindings/clock/qcom,gcc-sdx65.yaml
new file mode 100644
index 0000000..523e18d
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-sdx65.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdx65.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SDX65
+
+maintainers:
+  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDX65
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sdx65.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sdx65
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+      - description: PCIE Pipe clock source
+      - description: USB3 phy wrapper pipe clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+      - const: pcie_pipe_clk
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sdx65";
+      reg = <0x100000 0x1f7400>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
+               <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
+                    "pcie_pipe_clk", "usb3_phy_wrapper_gcc_usb30_pipe_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-sm6115.yaml b/Bindings/clock/qcom,gcc-sm6115.yaml
new file mode 100644
index 0000000..a5ad0a3
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-sm6115.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm6115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM6115 and SM4250
+
+maintainers:
+  - Iskren Chernev <iskren.chernev@gmail.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM4250/6115.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sm6115.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm6115
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@1400000 {
+        compatible = "qcom,gcc-sm6115";
+        reg = <0x01400000 0x1f0000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+        clock-names = "bi_tcxo", "sleep_clk";
+        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-sm6125.yaml b/Bindings/clock/qcom,gcc-sm6125.yaml
new file mode 100644
index 0000000..8e37623
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-sm6125.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm6125.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM6125
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM6125.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sm6125.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm6125
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@1400000 {
+        compatible = "qcom,gcc-sm6125";
+        reg = <0x01400000 0x1f0000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+        clock-names = "bi_tcxo", "sleep_clk";
+        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-sm6350.yaml b/Bindings/clock/qcom,gcc-sm6350.yaml
new file mode 100644
index 0000000..d1b26ab
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-sm6350.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm6350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM6350
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM6350.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sm6350.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm6350
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm6350";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-sm8150.yaml b/Bindings/clock/qcom,gcc-sm8150.yaml
new file mode 100644
index 0000000..58ccb7d
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-sm8150.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8150
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8150.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sm8150.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm8150
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm8150";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-sm8250.yaml b/Bindings/clock/qcom,gcc-sm8250.yaml
new file mode 100644
index 0000000..5d77c09
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-sm8250.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8250
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8250.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sm8250.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm8250
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm8250";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,gcc-sm8350.yaml b/Bindings/clock/qcom,gcc-sm8350.yaml
new file mode 100644
index 0000000..b4fdde7
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-sm8350.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8350
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8350.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sm8350.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm8350
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source (Optional clock)
+      - description: PCIE 1 Pipe clock source (Optional clock)
+      - description: UFS card Rx symbol 0 clock source (Optional clock)
+      - description: UFS card Rx symbol 1 clock source (Optional clock)
+      - description: UFS card Tx symbol 0 clock source (Optional clock)
+      - description: UFS phy Rx symbol 0 clock source (Optional clock)
+      - description: UFS phy Rx symbol 1 clock source (Optional clock)
+      - description: UFS phy Tx symbol 0 clock source (Optional clock)
+      - description: USB3 phy wrapper pipe clock source (Optional clock)
+      - description: USB3 phy sec pipe clock source (Optional clock)
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk # Optional clock
+      - const: pcie_1_pipe_clk # Optional clock
+      - const: ufs_card_rx_symbol_0_clk # Optional clock
+      - const: ufs_card_rx_symbol_1_clk # Optional clock
+      - const: ufs_card_tx_symbol_0_clk # Optional clock
+      - const: ufs_phy_rx_symbol_0_clk # Optional clock
+      - const: ufs_phy_rx_symbol_1_clk # Optional clock
+      - const: ufs_phy_tx_symbol_0_clk # Optional clock
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock
+      - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk # Optional clock
+    minItems: 2
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm8350";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/qcom,gcc-sm8450.yaml b/Bindings/clock/qcom,gcc-sm8450.yaml
new file mode 100644
index 0000000..75259f4
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-sm8450.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8450.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8450
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8450
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sm8450.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm8450
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source (Optional clock)
+      - description: PCIE 1 Pipe clock source (Optional clock)
+      - description: PCIE 1 Phy Auxiliary clock source (Optional clock)
+      - description: UFS Phy Rx symbol 0 clock source (Optional clock)
+      - description: UFS Phy Rx symbol 1 clock source (Optional clock)
+      - description: UFS Phy Tx symbol 0 clock source (Optional clock)
+      - description: USB3 Phy wrapper pipe clock source (Optional clock)
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk # Optional clock
+      - const: pcie_1_pipe_clk # Optional clock
+      - const: pcie_1_phy_aux_clk # Optional clock
+      - const: ufs_phy_rx_symbol_0_clk # Optional clock
+      - const: ufs_phy_rx_symbol_1_clk # Optional clock
+      - const: ufs_phy_tx_symbol_0_clk # Optional clock
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock
+    minItems: 2
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm8450";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+      clock-names = "bi_tcxo", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/qcom,gcc.yaml b/Bindings/clock/qcom,gcc.yaml
new file mode 100644
index 0000000..7888251
--- /dev/null
+++ b/Bindings/clock/qcom,gcc.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Common Properties
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Common bindings for Qualcomm global clock control module providing the
+  clocks, resets and power domains.
+
+properties:
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: true
+
+...
diff --git a/Bindings/clock/qcom,gpucc-sdm660.yaml b/Bindings/clock/qcom,gpucc-sdm660.yaml
new file mode 100644
index 0000000..0518ea9
--- /dev/null
+++ b/Bindings/clock/qcom,gpucc-sdm660.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gpucc-sdm660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SDM630 and SDM660
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  Qualcomm graphics clock control module provides the clocks, resets and
+  power domains on SDM630 and SDM660.
+
+  See also dt-bindings/clock/qcom,gpucc-sdm660.h.
+
+properties:
+  compatible:
+    enum:
+      - qcom,gpucc-sdm630
+      - qcom,gpucc-sdm660
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main gpu branch
+      - description: GPLL0 divider gpu branch
+
+  clock-names:
+    items:
+      - const: xo
+      - const: gcc_gpu_gpll0_clk
+      - const: gcc_gpu_gpll0_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm660.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    clock-controller@5065000 {
+      compatible = "qcom,gpucc-sdm660";
+      reg = <0x05065000 0x9038>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&gcc GCC_GPU_GPLL0_CLK>,
+               <&gcc GCC_GPU_GPLL0_DIV_CLK>;
+      clock-names = "xo", "gcc_gpu_gpll0_clk",
+                    "gcc_gpu_gpll0_div_clk";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,gpucc.yaml b/Bindings/clock/qcom,gpucc.yaml
new file mode 100644
index 0000000..f369fa3
--- /dev/null
+++ b/Bindings/clock/qcom,gpucc.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm graphics clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also::
+    include/dt-bindings/clock/qcom,gpucc-sdm845.h
+    include/dt-bindings/clock/qcom,gpucc-sa8775p.h
+    include/dt-bindings/clock/qcom,gpucc-sc7180.h
+    include/dt-bindings/clock/qcom,gpucc-sc7280.h
+    include/dt-bindings/clock/qcom,gpucc-sc8280xp.h
+    include/dt-bindings/clock/qcom,gpucc-sm6350.h
+    include/dt-bindings/clock/qcom,gpucc-sm8150.h
+    include/dt-bindings/clock/qcom,gpucc-sm8250.h
+    include/dt-bindings/clock/qcom,gpucc-sm8350.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdm845-gpucc
+      - qcom,sa8775p-gpucc
+      - qcom,sc7180-gpucc
+      - qcom,sc7280-gpucc
+      - qcom,sc8180x-gpucc
+      - qcom,sc8280xp-gpucc
+      - qcom,sm6350-gpucc
+      - qcom,sm8150-gpucc
+      - qcom,sm8250-gpucc
+      - qcom,sm8350-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_gpu_gpll0_clk_src
+      - const: gcc_gpu_gpll0_div_clk_src
+
+  power-domains:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@5090000 {
+      compatible = "qcom,sdm845-gpucc";
+      reg = <0x05090000 0x9000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+               <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+      clock-names = "bi_tcxo",
+                    "gcc_gpu_gpll0_clk_src",
+                    "gcc_gpu_gpll0_div_clk_src";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,hfpll.txt b/Bindings/clock/qcom,hfpll.txt
new file mode 100644
index 0000000..5769cbb
--- /dev/null
+++ b/Bindings/clock/qcom,hfpll.txt
@@ -0,0 +1,63 @@
+High-Frequency PLL (HFPLL)
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>:
+		shall contain only one of the following. The generic
+		compatible "qcom,hfpll" should be also included.
+
+                        "qcom,hfpll-ipq8064", "qcom,hfpll"
+                        "qcom,hfpll-apq8064", "qcom,hfpll"
+                        "qcom,hfpll-msm8974", "qcom,hfpll"
+                        "qcom,hfpll-msm8960", "qcom,hfpll"
+                        "qcom,msm8976-hfpll-a53", "qcom,hfpll"
+                        "qcom,msm8976-hfpll-a72", "qcom,hfpll"
+                        "qcom,msm8976-hfpll-cci", "qcom,hfpll"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: address and size of HPLL registers. An optional second
+		    element specifies the address and size of the alias
+		    register region.
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to the xo clock.
+
+- clock-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "xo".
+
+- clock-output-names:
+	Usage: required
+	Value type: <string>
+	Definition: Name of the PLL. Typically hfpllX where X is a CPU number
+		    starting at 0. Otherwise hfpll_Y where Y is more specific
+		    such as "l2".
+
+Example:
+
+1) An HFPLL for the L2 cache.
+
+	clock-controller@f9016000 {
+		compatible = "qcom,hfpll-ipq8064", "qcom,hfpll";
+		reg = <0xf9016000 0x30>;
+		clocks = <&xo_board>;
+		clock-names = "xo";
+		clock-output-names = "hfpll_l2";
+	};
+
+2) An HFPLL for CPU0. This HFPLL has the alias register region.
+
+	clock-controller@f908a000 {
+		compatible = "qcom,hfpll-ipq8064", "qcom,hfpll";
+		reg = <0xf908a000 0x30>, <0xf900a000 0x30>;
+		clocks = <&xo_board>;
+		clock-names = "xo";
+		clock-output-names = "hfpll0";
+	};
diff --git a/Bindings/clock/qcom,ipq5018-gcc.yaml b/Bindings/clock/qcom,ipq5018-gcc.yaml
new file mode 100644
index 0000000..ef84a0c
--- /dev/null
+++ b/Bindings/clock/qcom,ipq5018-gcc.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq5018-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ5018
+
+maintainers:
+  - Sricharan Ramabadhran <quic_srichara@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ5018
+
+  See also::
+    include/dt-bindings/clock/qcom,ipq5018-gcc.h
+    include/dt-bindings/reset/qcom,ipq5018-gcc.h
+
+properties:
+  compatible:
+    const: qcom,gcc-ipq5018
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE20 PHY0 pipe clock source
+      - description: PCIE20 PHY1 pipe clock source
+      - description: USB3 PHY pipe clock source
+      - description: GEPHY RX clock source
+      - description: GEPHY TX clock source
+      - description: UNIPHY RX clock source
+      - description: UNIPHY TX clk source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-ipq5018";
+      reg = <0x01800000 0x80000>;
+      clocks = <&xo_board_clk>,
+               <&sleep_clk>,
+               <&pcie20_phy0_pipe_clk>,
+               <&pcie20_phy1_pipe_clk>,
+               <&usb3_phy0_pipe_clk>,
+               <&gephy_rx_clk>,
+               <&gephy_tx_clk>,
+               <&uniphy_rx_clk>,
+               <&uniphy_tx_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,ipq5332-gcc.yaml b/Bindings/clock/qcom,ipq5332-gcc.yaml
new file mode 100644
index 0000000..718fe06
--- /dev/null
+++ b/Bindings/clock/qcom,ipq5332-gcc.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq5332-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ5332
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ5332.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-ipq5332.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,ipq5332-gcc
+
+  clocks:
+    items:
+      - description: Board XO clock source
+      - description: Sleep clock source
+      - description: PCIE 2lane PHY pipe clock source
+      - description: PCIE 2lane x1 PHY pipe clock source (For second lane)
+      - description: USB PCIE wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,ipq5332-gcc";
+      reg = <0x01800000 0x80000>;
+      clocks = <&xo_board>,
+               <&sleep_clk>,
+               <&pcie_2lane_phy_pipe_clk>,
+               <&pcie_2lane_phy_pipe_clk_x1>,
+               <&usb_pcie_wrapper_pipe_clk>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,ipq9574-gcc.yaml b/Bindings/clock/qcom,ipq9574-gcc.yaml
new file mode 100644
index 0000000..944a0ea
--- /dev/null
+++ b/Bindings/clock/qcom,ipq9574-gcc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq9574-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ9574
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Anusha Rao <quic_anusha@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ9574
+
+  See also::
+    include/dt-bindings/clock/qcom,ipq9574-gcc.h
+    include/dt-bindings/reset/qcom,ipq9574-gcc.h
+
+properties:
+  compatible:
+    const: qcom,ipq9574-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: Bias PLL ubi clock source
+      - description: PCIE30 PHY0 pipe clock source
+      - description: PCIE30 PHY1 pipe clock source
+      - description: PCIE30 PHY2 pipe clock source
+      - description: PCIE30 PHY3 pipe clock source
+      - description: USB3 PHY pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,ipq9574-gcc";
+      reg = <0x01800000 0x80000>;
+      clocks = <&xo_board_clk>,
+               <&sleep_clk>,
+               <&bias_pll_ubi_nc_clk>,
+               <&pcie30_phy0_pipe_clk>,
+               <&pcie30_phy1_pipe_clk>,
+               <&pcie30_phy2_pipe_clk>,
+               <&pcie30_phy3_pipe_clk>,
+               <&usb3phy_0_cc_pipe_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,kpss-acc-v1.yaml b/Bindings/clock/qcom,kpss-acc-v1.yaml
new file mode 100644
index 0000000..5763275
--- /dev/null
+++ b/Bindings/clock/qcom,kpss-acc-v1.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,kpss-acc-v1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Krait Processor Sub-system (KPSS) Application Clock Controller (ACC) v1
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+  The KPSS ACC provides clock, power domain, and reset control to a Krait CPU.
+  There is one ACC register region per CPU within the KPSS remapped region as
+  well as an alias register region that remaps accesses to the ACC associated
+  with the CPU accessing the region. ACC v1 is currently used as a
+  clock-controller for enabling the cpu and handling the aux clocks.
+
+properties:
+  compatible:
+    const: qcom,kpss-acc-v1
+
+  reg:
+    items:
+      - description: Base address and size of the register region
+      - description: Optional base address and size of the alias register region
+    minItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pll8_vote
+      - const: pxo
+
+  clock-output-names:
+    description: Name of the aux clock. Krait can have at most 4 cpu.
+    enum:
+      - acpu0_aux
+      - acpu1_aux
+      - acpu2_aux
+      - acpu3_aux
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-output-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+
+    clock-controller@2088000 {
+      compatible = "qcom,kpss-acc-v1";
+      reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+      clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+      clock-names = "pll8_vote", "pxo";
+      clock-output-names = "acpu0_aux";
+      #clock-cells = <0>;
+    };
+
+...
diff --git a/Bindings/clock/qcom,kpss-gcc.yaml b/Bindings/clock/qcom,kpss-gcc.yaml
new file mode 100644
index 0000000..88b7672
--- /dev/null
+++ b/Bindings/clock/qcom,kpss-gcc.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,kpss-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Krait Processor Sub-system (KPSS) Global Clock Controller (GCC)
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+  Krait Processor Sub-system (KPSS) Global Clock Controller (GCC). Used
+  to control L2 mux (in the current implementation) and provide access
+  to the kpss-gcc registers.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,kpss-gcc-ipq8064
+          - qcom,kpss-gcc-apq8064
+          - qcom,kpss-gcc-msm8974
+          - qcom,kpss-gcc-msm8960
+          - qcom,kpss-gcc-msm8660
+          - qcom,kpss-gcc-mdm9615
+      - const: qcom,kpss-gcc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pll8_vote
+      - const: pxo
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,kpss-gcc-ipq8064
+          - qcom,kpss-gcc-apq8064
+          - qcom,kpss-gcc-msm8974
+          - qcom,kpss-gcc-msm8960
+then:
+  required:
+    - clocks
+    - clock-names
+    - '#clock-cells'
+else:
+  properties:
+    clock: false
+    clock-names: false
+    '#clock-cells': false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+
+    clock-controller@2011000 {
+      compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon";
+      reg = <0x2011000 0x1000>;
+      clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+      clock-names = "pll8_vote", "pxo";
+      #clock-cells = <0>;
+    };
+
+  - |
+    clock-controller@2011000 {
+      compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon";
+      reg = <0x02011000 0x1000>;
+    };
+...
diff --git a/Bindings/clock/qcom,krait-cc.txt b/Bindings/clock/qcom,krait-cc.txt
new file mode 100644
index 0000000..030ba60
--- /dev/null
+++ b/Bindings/clock/qcom,krait-cc.txt
@@ -0,0 +1,34 @@
+Krait Clock Controller
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+			"qcom,krait-cc-v1"
+			"qcom,krait-cc-v2"
+
+- #clock-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 1
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to the clock parents of hfpll, secondary muxes.
+
+- clock-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb".
+
+Example:
+
+	kraitcc: clock-controller {
+		compatible = "qcom,krait-cc-v1";
+		clocks = <&hfpll0>, <&hfpll1>, <&acpu0_aux>, <&acpu1_aux>, <qsb>;
+		clock-names = "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb";
+		#clock-cells = <1>;
+	};
diff --git a/Bindings/clock/qcom,lcc.yaml b/Bindings/clock/qcom,lcc.yaml
new file mode 100644
index 0000000..55985e5
--- /dev/null
+++ b/Bindings/clock/qcom,lcc.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,lcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Clock & Reset Controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,lcc-apq8064
+      - qcom,lcc-ipq8064
+      - qcom,lcc-mdm9615
+      - qcom,lcc-msm8960
+
+  clocks:
+    maxItems: 8
+
+  clock-names:
+    maxItems: 8
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,lcc-apq8064
+              - qcom,lcc-msm8960
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board PXO source
+            - description: PLL 4 Vote clock
+            - description: MI2S codec clock
+            - description: Mic I2S codec clock
+            - description: Mic I2S spare clock
+            - description: Speaker I2S codec clock
+            - description: Speaker I2S spare clock
+            - description: PCM codec clock
+
+        clock-names:
+          items:
+            - const: pxo
+            - const: pll4_vote
+            - const: mi2s_codec_clk
+            - const: codec_i2s_mic_codec_clk
+            - const: spare_i2s_mic_codec_clk
+            - const: codec_i2s_spkr_codec_clk
+            - const: spare_i2s_spkr_codec_clk
+            - const: pcm_codec_clk
+
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,lcc-mdm9615
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board CXO source
+            - description: PLL 4 Vote clock
+            - description: MI2S codec clock
+            - description: Mic I2S codec clock
+            - description: Mic I2S spare clock
+            - description: Speaker I2S codec clock
+            - description: Speaker I2S spare clock
+            - description: PCM codec clock
+
+        clock-names:
+          items:
+            - const: cxo
+            - const: pll4_vote
+            - const: mi2s_codec_clk
+            - const: codec_i2s_mic_codec_clk
+            - const: spare_i2s_mic_codec_clk
+            - const: codec_i2s_spkr_codec_clk
+            - const: spare_i2s_spkr_codec_clk
+            - const: pcm_codec_clk
+
+      required:
+        - clocks
+        - clock-names
+
+examples:
+  - |
+    clock-controller@28000000 {
+        compatible = "qcom,lcc-ipq8064";
+        reg = <0x28000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/qcom,mmcc.yaml b/Bindings/clock/qcom,mmcc.yaml
new file mode 100644
index 0000000..aa35a40
--- /dev/null
+++ b/Bindings/clock/qcom,mmcc.yaml
@@ -0,0 +1,360 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,mmcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Multimedia Clock & Reset Controller
+
+maintainers:
+  - Jeffrey Hugo <quic_jhugo@quicinc.com>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm multimedia clock control module provides the clocks, resets and
+  power domains.
+
+properties:
+  compatible:
+    enum:
+      - qcom,mmcc-apq8064
+      - qcom,mmcc-apq8084
+      - qcom,mmcc-msm8226
+      - qcom,mmcc-msm8660
+      - qcom,mmcc-msm8960
+      - qcom,mmcc-msm8974
+      - qcom,mmcc-msm8992
+      - qcom,mmcc-msm8994
+      - qcom,mmcc-msm8996
+      - qcom,mmcc-msm8998
+      - qcom,mmcc-sdm630
+      - qcom,mmcc-sdm660
+
+  clocks:
+    minItems: 7
+    maxItems: 13
+
+  clock-names:
+    minItems: 7
+    maxItems: 13
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding
+
+  vdd-gfx-supply:
+    description:
+      Regulator supply for the GPU_GX GDSC
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-apq8064
+              - qcom,mmcc-msm8960
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board PXO source
+            - description: PLL 3 clock
+            - description: PLL 3 Vote clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: DSI phy instance 2 dsi clock
+            - description: DSI phy instance 2 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: pxo
+            - const: pll3
+            - const: pll8_vote
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: dsi2pll
+            - const: dsi2pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-msm8226
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: MMSS GPLL0 voted clock
+            - description: GPLL0 voted clock
+            - description: GPLL1 voted clock
+            - description: GFX3D clock source
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: mmss_gpll0_vote
+            - const: gpll0_vote
+            - const: gpll1_vote
+            - const: gfx3d_clk_src
+            - const: dsi0pll
+            - const: dsi0pllbyte
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-msm8974
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: MMSS GPLL0 voted clock
+            - description: GPLL0 voted clock
+            - description: GPLL1 voted clock
+            - description: GFX3D clock source
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+            - description: eDP phy PLL link clock
+            - description: eDP phy PLL vco clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: mmss_gpll0_vote
+            - const: gpll0_vote
+            - const: gpll1_vote
+            - const: gfx3d_clk_src
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+            - const: edp_link_clk
+            - const: edp_vco_div
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-apq8084
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board sleep source
+            - description: MMSS GPLL0 voted clock
+            - description: GPLL0 clock
+            - description: GPLL0 voted clock
+            - description: GPLL1 clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+            - description: eDP phy PLL link clock
+            - description: eDP phy PLL vco clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: sleep_clk
+            - const: mmss_gpll0_vote
+            - const: gpll0
+            - const: gpll0_vote
+            - const: gpll1
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+            - const: edp_link_clk
+            - const: edp_vco_div
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-msm8994
+              - qcom,mmcc-msm8998
+              - qcom,mmcc-sdm630
+              - qcom,mmcc-sdm660
+    then:
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8994
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: MMSS NoC AHB clock
+            - description: GFX3D clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: mmssnoc_ahb
+            - const: oxili_gfx3d_clk_src
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8996
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: MMSS NoC AHB clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: gcc_mmss_noc_cfg_ahb_clk
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8998
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+            - description: DisplayPort phy PLL link clock
+            - description: DisplayPort phy PLL vco clock
+            - description: Global PLL 0 DIV clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: dsi0dsi
+            - const: dsi0byte
+            - const: dsi1dsi
+            - const: dsi1byte
+            - const: hdmipll
+            - const: dplink
+            - const: dpvco
+            - const: gpll0_div
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-sdm630
+              - qcom,mmcc-sdm660
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board sleep source
+            - description: Global PLL 0 clock
+            - description: Global PLL 0 DIV clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: DisplayPort phy PLL link clock
+            - description: DisplayPort phy PLL vco clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: sleep_clk
+            - const: gpll0
+            - const: gpll0_div
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: dp_link_2x_clk_divsel_five
+            - const: dp_vco_divided_clk_src_mux
+
+examples:
+  # Example for MMCC for MSM8960:
+  - |
+    clock-controller@4000000 {
+      compatible = "qcom,mmcc-msm8960";
+      reg = <0x4000000 0x1000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,msm8996-apcc.yaml b/Bindings/clock/qcom,msm8996-apcc.yaml
new file mode 100644
index 0000000..fcace96
--- /dev/null
+++ b/Bindings/clock/qcom,msm8996-apcc.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,msm8996-apcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm clock controller for MSM8996 CPUs
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+description: |
+  Qualcomm CPU clock controller for MSM8996 CPUs, clock 0 is for Power cluster
+  and clock 1 is for Perf cluster.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8996-apcc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: XO source
+      - description: SYS APCS AUX clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sys_apcs_aux
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    kryocc: clock-controller@6400000 {
+        compatible = "qcom,msm8996-apcc";
+        reg = <0x6400000 0x90000>;
+        #clock-cells = <1>;
+
+        clocks = <&xo_board>, <&apcs_glb>;
+        clock-names = "xo", "sys_apcs_aux";
+    };
diff --git a/Bindings/clock/qcom,msm8996-cbf.yaml b/Bindings/clock/qcom,msm8996-cbf.yaml
new file mode 100644
index 0000000..0dfbd8c
--- /dev/null
+++ b/Bindings/clock/qcom,msm8996-cbf.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,msm8996-cbf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8996 Core Bus Fabric (CBF) clock controller
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description: >
+  The clock controller for the Qualcomm MSM8996 CBF clock, which drives the
+  interconnect between two CPU clusters.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8996-cbf
+      - qcom,msm8996pro-cbf
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO source
+      - description: SYS APCS AUX clock
+
+  '#clock-cells':
+    const: 0
+
+  '#interconnect-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#interconnect-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@9a11000 {
+        compatible = "qcom,msm8996-cbf";
+        reg = <0x09a11000 0x10000>;
+        clocks = <&rpmcc RPM_SMD_BB_CLK1>, <&apcs_glb>;
+        #clock-cells = <0>;
+        #interconnect-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,msm8998-gpucc.yaml b/Bindings/clock/qcom,msm8998-gpucc.yaml
new file mode 100644
index 0000000..7b271ae
--- /dev/null
+++ b/Bindings/clock/qcom,msm8998-gpucc.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,msm8998-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on MSM8998
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm graphics clock control module provides the clocks, resets and power
+  domains on MSM8998.
+
+  See also:: include/dt-bindings/clock/qcom,gpucc-msm8998.h
+
+properties:
+  compatible:
+    const: qcom,msm8998-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source (gcc_gpu_gpll0_clk_src)
+
+  clock-names:
+    items:
+      - const: xo
+      - const: gpll0
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@5065000 {
+      compatible = "qcom,msm8998-gpucc";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x05065000 0x9000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0_OUT_MAIN>;
+      clock-names = "xo", "gpll0";
+    };
+...
diff --git a/Bindings/clock/qcom,q6sstopcc.yaml b/Bindings/clock/qcom,q6sstopcc.yaml
new file mode 100644
index 0000000..03fa30f
--- /dev/null
+++ b/Bindings/clock/qcom,q6sstopcc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,q6sstopcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Q6SSTOP clock Controller
+
+maintainers:
+  - Govind Singh <govinds@codeaurora.org>
+
+properties:
+  compatible:
+    const: qcom,qcs404-q6sstopcc
+
+  reg:
+    items:
+      - description: Q6SSTOP clocks register region
+      - description: Q6SSTOP_TCSR register region
+
+  clocks:
+    items:
+      - description: ahb clock for the q6sstopCC
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    q6sstopcc: clock-controller@7500000 {
+      compatible = "qcom,qcs404-q6sstopcc";
+      reg = <0x07500000 0x4e000>, <0x07550000 0x10000>;
+      clocks = <&gcc 141>;
+      #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/qcom,qcm2290-dispcc.yaml b/Bindings/clock/qcom,qcm2290-dispcc.yaml
new file mode 100644
index 0000000..4a00f2d
--- /dev/null
+++ b/Bindings/clock/qcom,qcm2290-dispcc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcm2290-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on QCM2290
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on qcm2290.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-qcm2290.h
+
+properties:
+  compatible:
+    const: qcom,qcm2290-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active-only XO source
+      - description: GPLL0 source from GCC
+      - description: GPLL0 div source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: gcc_disp_gpll0_clk_src
+      - const: gcc_disp_gpll0_div_clk_src
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@5f00000 {
+            compatible = "qcom,qcm2290-dispcc";
+            reg = <0x5f00000 0x20000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+                     <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+                     <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+                     <&dsi0_phy 0>,
+                     <&dsi0_phy 1>;
+            clock-names = "bi_tcxo",
+                          "bi_tcxo_ao",
+                          "gcc_disp_gpll0_clk_src",
+                          "gcc_disp_gpll0_div_clk_src",
+                          "dsi0_phy_pll_out_byteclk",
+                          "dsi0_phy_pll_out_dsiclk";
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,qdu1000-gcc.yaml b/Bindings/clock/qcom,qdu1000-gcc.yaml
new file mode 100644
index 0000000..d712b1a
--- /dev/null
+++ b/Bindings/clock/qcom,qdu1000-gcc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qdu1000-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller for QDU1000 and QRU1000
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+  - Imran Shaik <quic_imrashai@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on QDU1000 and QRU1000
+
+  See also:: include/dt-bindings/clock/qcom,qdu1000-gcc.h
+
+properties:
+  compatible:
+    const: qcom,qdu1000-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source
+      - description: PCIE 0 Phy Auxiliary clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,qdu1000-gcc";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>,
+               <&pcie_0_pipe_clk>, <&pcie_0_phy_aux_clk>,
+               <&usb3_phy_wrapper_pipe_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
diff --git a/Bindings/clock/qcom,rpmcc.yaml b/Bindings/clock/qcom,rpmcc.yaml
new file mode 100644
index 0000000..3665dd3
--- /dev/null
+++ b/Bindings/clock/qcom,rpmcc.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,rpmcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPM Clock Controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> and
+  come in pairs:: FOO_CLK followed by FOO_A_CLK. The latter clock is
+  an "active" clock, which means that the consumer only care that the clock is
+  available when the apps CPU subsystem is active, i.e. not suspended or in
+  deep idle. If it is important that the clock keeps running during system
+  suspend, you need to specify the non-active clock, the one not containing
+  *_A_* in the enumerator name.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,rpmcc-apq8060
+          - qcom,rpmcc-apq8064
+          - qcom,rpmcc-ipq806x
+          - qcom,rpmcc-mdm9607
+          - qcom,rpmcc-msm8226
+          - qcom,rpmcc-msm8660
+          - qcom,rpmcc-msm8909
+          - qcom,rpmcc-msm8916
+          - qcom,rpmcc-msm8917
+          - qcom,rpmcc-msm8936
+          - qcom,rpmcc-msm8953
+          - qcom,rpmcc-msm8974
+          - qcom,rpmcc-msm8976
+          - qcom,rpmcc-msm8992
+          - qcom,rpmcc-msm8994
+          - qcom,rpmcc-msm8996
+          - qcom,rpmcc-msm8998
+          - qcom,rpmcc-qcm2290
+          - qcom,rpmcc-qcs404
+          - qcom,rpmcc-sdm660
+          - qcom,rpmcc-sm6115
+          - qcom,rpmcc-sm6125
+          - qcom,rpmcc-sm6375
+      - const: qcom,rpmcc
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - '#clock-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,rpmcc-apq8060
+              - qcom,rpmcc-ipq806x
+              - qcom,rpmcc-msm8660
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pxo clock
+
+        clock-names:
+          items:
+            - const: pxo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,rpmcc-apq8064
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pxo clock
+            - description: cxo clock
+
+        clock-names:
+          items:
+            - const: pxo
+            - const: cxo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,rpmcc-mdm9607
+              - qcom,rpmcc-msm8226
+              - qcom,rpmcc-msm8916
+              - qcom,rpmcc-msm8917
+              - qcom,rpmcc-msm8936
+              - qcom,rpmcc-msm8953
+              - qcom,rpmcc-msm8974
+              - qcom,rpmcc-msm8976
+              - qcom,rpmcc-msm8992
+              - qcom,rpmcc-msm8994
+              - qcom,rpmcc-msm8996
+              - qcom,rpmcc-msm8998
+              - qcom,rpmcc-qcm2290
+              - qcom,rpmcc-qcs404
+              - qcom,rpmcc-sdm660
+              - qcom,rpmcc-sm6115
+              - qcom,rpmcc-sm6125
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: xo clock
+
+        clock-names:
+          items:
+            - const: xo
+
+additionalProperties: false
+
+examples:
+  - |
+    rpm {
+        rpm-requests {
+            compatible = "qcom,rpm-msm8916";
+            qcom,smd-channels = "rpm_requests";
+
+            clock-controller {
+                compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+                #clock-cells = <1>;
+            };
+        };
+    };
+
+  - |
+    rpm {
+        clock-controller {
+            compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+            #clock-cells = <1>;
+            clocks = <&pxo_board>;
+            clock-names = "pxo";
+        };
+    };
diff --git a/Bindings/clock/qcom,rpmhcc.yaml b/Bindings/clock/qcom,rpmhcc.yaml
new file mode 100644
index 0000000..4eb5e59
--- /dev/null
+++ b/Bindings/clock/qcom,rpmhcc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,rpmhcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. RPMh Clocks
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Resource Power Manager Hardened (RPMh) manages shared resources on
+  some Qualcomm Technologies Inc. SoCs. It accepts clock requests from
+  other hardware subsystems via RSC to control clocks.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qdu1000-rpmh-clk
+      - qcom,sa8775p-rpmh-clk
+      - qcom,sc7180-rpmh-clk
+      - qcom,sc7280-rpmh-clk
+      - qcom,sc8180x-rpmh-clk
+      - qcom,sc8280xp-rpmh-clk
+      - qcom,sdm670-rpmh-clk
+      - qcom,sdm845-rpmh-clk
+      - qcom,sdx55-rpmh-clk
+      - qcom,sdx65-rpmh-clk
+      - qcom,sdx75-rpmh-clk
+      - qcom,sm4450-rpmh-clk
+      - qcom,sm6350-rpmh-clk
+      - qcom,sm8150-rpmh-clk
+      - qcom,sm8250-rpmh-clk
+      - qcom,sm8350-rpmh-clk
+      - qcom,sm8450-rpmh-clk
+      - qcom,sm8550-rpmh-clk
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: xo
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Example for GCC for SDM845: The below node should be defined inside
+  # &apps_rsc node.
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    rpmhcc: clock-controller {
+      compatible = "qcom,sdm845-rpmh-clk";
+      clocks = <&xo_board>;
+      clock-names = "xo";
+      #clock-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sa8775p-gcc.yaml b/Bindings/clock/qcom,sa8775p-gcc.yaml
new file mode 100644
index 0000000..0f641c2
--- /dev/null
+++ b/Bindings/clock/qcom,sa8775p-gcc.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sa8775p-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on sa8775p
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and
+  power domains on sa8775p.
+
+  See also:: include/dt-bindings/clock/qcom,sa8775p-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sa8775p-gcc
+
+  clocks:
+    items:
+      - description: XO reference clock
+      - description: Sleep clock
+      - description: UFS memory first RX symbol clock
+      - description: UFS memory second RX symbol clock
+      - description: UFS memory first TX symbol clock
+      - description: UFS card first RX symbol clock
+      - description: UFS card second RX symbol clock
+      - description: UFS card first TX symbol clock
+      - description: Primary USB3 PHY wrapper pipe clock
+      - description: Secondary USB3 PHY wrapper pipe clock
+      - description: PCIe 0 pipe clock
+      - description: PCIe 1 pipe clock
+      - description: PCIe PHY clock
+      - description: First EMAC controller reference clock
+      - description: Second EMAC controller reference clock
+
+  protected-clocks:
+    maxItems: 240
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    gcc: clock-controller@100000 {
+        compatible = "qcom,sa8775p-gcc";
+        reg = <0x100000 0xc7018>;
+        clocks = <&rpmhcc RPMH_CXO_CLK>,
+                 <&sleep_clk>,
+                 <&ufs_phy_rx_symbol_0_clk>,
+                 <&ufs_phy_rx_symbol_1_clk>,
+                 <&ufs_phy_tx_symbol_0_clk>,
+                 <&ufs_card_rx_symbol_0_clk>,
+                 <&ufs_card_rx_symbol_1_clk>,
+                 <&ufs_card_tx_symbol_0_clk>,
+                 <&usb_0_ssphy>,
+                 <&usb_1_ssphy>,
+                 <&pcie_0_pipe_clk>,
+                 <&pcie_1_pipe_clk>,
+                 <&pcie_phy_pipe_clk>,
+                 <&rxc0_ref_clk>,
+                 <&rxc1_ref_clk>;
+        power-domains = <&rpmhpd SA8775P_CX>;
+
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sc7180-camcc.yaml b/Bindings/clock/qcom,sc7180-camcc.yaml
new file mode 100644
index 0000000..2dfc2a4
--- /dev/null
+++ b/Bindings/clock/qcom,sc7180-camcc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SC7180
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SC7180.
+
+  See also:: include/dt-bindings/clock/qcom,camcc-sc7180.h
+
+properties:
+  compatible:
+    const: qcom,sc7180-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Camera_ahb clock from GCC
+      - description: Camera XO clock from GCC
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: iface
+      - const: xo
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sc7180-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_CAMERA_AHB_CLK>,
+               <&gcc GCC_CAMERA_XO_CLK>;
+      clock-names = "bi_tcxo", "iface", "xo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sc7180-dispcc.yaml b/Bindings/clock/qcom,sc7180-dispcc.yaml
new file mode 100644
index 0000000..1c9ce30
--- /dev/null
+++ b/Bindings/clock/qcom,sc7180-dispcc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SC7180
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SC7180.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-sc7180.h
+
+properties:
+  compatible:
+    const: qcom,sc7180-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk_src
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sc7180-dispcc";
+      reg = <0x0af00000 0x200000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk_src",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sc7180-lpasscorecc.yaml b/Bindings/clock/qcom,sc7180-lpasscorecc.yaml
new file mode 100644
index 0000000..fdfb389
--- /dev/null
+++ b/Bindings/clock/qcom,sc7180-lpasscorecc.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-lpasscorecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core Clock Controller on SC7180
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm LPASS core clock control module provides the clocks and power
+  domains on SC7180.
+
+  See also:: include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-lpasshm
+      - qcom,sc7180-lpasscorecc
+
+  clocks:
+    items:
+      - description: gcc_lpass_sway clock from GCC
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bi_tcxo
+
+  power-domains:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    minItems: 1
+    items:
+      - description: lpass core cc register
+      - description: lpass audio cc register
+
+  reg-names:
+    items:
+      - const: lpass_core_cc
+      - const: lpass_audio_cc
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: qcom,sc7180-lpasshm
+then:
+  properties:
+    reg:
+      maxItems: 1
+
+else:
+  properties:
+    reg:
+      minItems: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
+    clock-controller@63000000 {
+      compatible = "qcom,sc7180-lpasshm";
+      reg = <0x63000000 0x28>;
+      clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "iface", "bi_tcxo";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
+    clock-controller@62d00000 {
+      compatible = "qcom,sc7180-lpasscorecc";
+      reg = <0x62d00000 0x50000>, <0x62780000 0x30000>;
+      reg-names = "lpass_core_cc", "lpass_audio_cc";
+      clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "iface", "bi_tcxo";
+      power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sc7180-mss.yaml b/Bindings/clock/qcom,sc7180-mss.yaml
new file mode 100644
index 0000000..873a2f9
--- /dev/null
+++ b/Bindings/clock/qcom,sc7180-mss.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Modem Clock Controller on SC7180
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm modem clock control module provides the clocks on SC7180.
+
+  See also:: include/dt-bindings/clock/qcom,mss-sc7180.h
+
+properties:
+  compatible:
+    const: qcom,sc7180-mss
+
+  clocks:
+    items:
+      - description: gcc_mss_mfab_axi clock from GCC
+      - description: gcc_mss_nav_axi clock from GCC
+      - description: gcc_mss_cfg_ahb clock from GCC
+
+  clock-names:
+    items:
+      - const: gcc_mss_mfab_axis
+      - const: gcc_mss_nav_axi
+      - const: cfg_ahb
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    clock-controller@41a8000 {
+      compatible = "qcom,sc7180-mss";
+      reg = <0x041a8000 0x8000>;
+      clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+               <&gcc GCC_MSS_NAV_AXI_CLK>,
+               <&gcc GCC_MSS_CFG_AHB_CLK>;
+      clock-names = "gcc_mss_mfab_axis",
+                    "gcc_mss_nav_axi",
+                    "cfg_ahb";
+      #clock-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sc7280-camcc.yaml b/Bindings/clock/qcom,sc7280-camcc.yaml
new file mode 100644
index 0000000..01feef1
--- /dev/null
+++ b/Bindings/clock/qcom,sc7280-camcc.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SC7280
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and
+  power domains on SC7280.
+
+  See also:: include/dt-bindings/clock/qcom,camcc-sc7280.h
+
+properties:
+  compatible:
+    const: qcom,sc7280-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO active source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sc7280-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sc7280-dispcc.yaml b/Bindings/clock/qcom,sc7280-dispcc.yaml
new file mode 100644
index 0000000..c42b0ef
--- /dev/null
+++ b/Bindings/clock/qcom,sc7280-dispcc.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SC7280
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SC7280.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-sc7280.h
+
+properties:
+  compatible:
+    const: qcom,sc7280-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+      - description: Link clock from EDP PHY
+      - description: VCO DIV clock from EDP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+      - const: edp_phy_pll_link_clk
+      - const: edp_phy_pll_vco_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sc7280-dispcc";
+      reg = <0x0af00000 0x200000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>,
+               <&edp_phy 0>,
+               <&edp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk",
+                    "edp_phy_pll_link_clk",
+                    "edp_phy_pll_vco_div_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sc7280-lpasscc.yaml b/Bindings/clock/qcom,sc7280-lpasscc.yaml
new file mode 100644
index 0000000..f44c5c1
--- /dev/null
+++ b/Bindings/clock/qcom,sc7280-lpasscc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core Clock Controller on SC7280
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm LPASS core clock control module provides the clocks and power
+  domains on SC7280.
+
+  See also:: include/dt-bindings/clock/qcom,lpass-sc7280.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-lpasscc
+
+  clocks:
+    items:
+      - description: gcc_cfg_noc_lpass_clk from GCC
+
+  clock-names:
+    items:
+      - const: iface
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    items:
+      - description: LPASS qdsp6ss register
+      - description: LPASS top-cc register
+
+  reg-names:
+    items:
+      - const: qdsp6ss
+      - const: top_cc
+
+  qcom,adsp-pil-mode:
+    description:
+      Indicates if the LPASS would be brought out of reset using
+      remoteproc peripheral loader.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpass-sc7280.h>
+    clock-controller@3000000 {
+      compatible = "qcom,sc7280-lpasscc";
+      reg = <0x03000000 0x40>, <0x03c04000 0x4>;
+      reg-names = "qdsp6ss", "top_cc";
+      clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
+      clock-names = "iface";
+      qcom,adsp-pil-mode;
+      #clock-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sc7280-lpasscorecc.yaml b/Bindings/clock/qcom,sc7280-lpasscorecc.yaml
new file mode 100644
index 0000000..deee542
--- /dev/null
+++ b/Bindings/clock/qcom,sc7280-lpasscorecc.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscorecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core & Audio Clock Controller on SC7280
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm LPASS core and audio clock control module provides the clocks and
+  power domains on SC7280.
+
+  See also::
+    include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h
+    include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h
+
+properties:
+  clocks: true
+
+  clock-names: true
+
+  reg: true
+
+  compatible:
+    enum:
+      - qcom,sc7280-lpassaoncc
+      - qcom,sc7280-lpassaudiocc
+      - qcom,sc7280-lpasscorecc
+      - qcom,sc7280-lpasshm
+
+  power-domains:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  qcom,adsp-pil-mode:
+    description:
+      Indicates if the LPASS would be brought out of reset using
+      peripheral loader.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc7280-lpassaudiocc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: lpass_aon_cc_main_rcg_clk_src
+
+        reg:
+          items:
+            - description: lpass core cc register
+            - description: lpass audio csr register
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-lpassaoncc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board XO active only source
+            - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: iface
+
+        reg:
+          maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-lpasshm
+              - qcom,sc7280-lpasscorecc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+
+        reg:
+          maxItems: 1
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_audiocc: clock-controller@3300000 {
+      compatible = "qcom,sc7280-lpassaudiocc";
+      reg = <0x3300000 0x30000>,
+            <0x32a9000 0x1000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
+      clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";
+      power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_hm: clock-controller@3c00000 {
+      compatible = "qcom,sc7280-lpasshm";
+      reg = <0x3c00000 0x28>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpasscore: clock-controller@3900000 {
+      compatible = "qcom,sc7280-lpasscorecc";
+      reg = <0x3900000 0x50000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_aon: clock-controller@3380000 {
+      compatible = "qcom,sc7280-lpassaoncc";
+      reg = <0x3380000 0x30000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>,
+               <&lpasscore LPASS_CORE_CC_CORE_CLK>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao","iface";
+      qcom,adsp-pil-mode;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/qcom,sc8280xp-lpasscc.yaml b/Bindings/clock/qcom,sc8280xp-lpasscc.yaml
new file mode 100644
index 0000000..3326dcd
--- /dev/null
+++ b/Bindings/clock/qcom,sc8280xp-lpasscc.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc8280xp-lpasscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core & Audio Clock Controller on SC8280XP
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm LPASS core and audio clock control module provides the clocks,
+  and reset on SC8280XP.
+
+  See also::
+    include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-lpassaudiocc
+      - qcom,sc8280xp-lpasscc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+    lpass_audiocc: clock-controller@32a9000 {
+        compatible = "qcom,sc8280xp-lpassaudiocc";
+        reg = <0x032a9000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+    lpasscc: clock-controller@33e0000 {
+        compatible = "qcom,sc8280xp-lpasscc";
+        reg = <0x033e0000 0x12000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sdm845-camcc.yaml b/Bindings/clock/qcom,sdm845-camcc.yaml
new file mode 100644
index 0000000..91d1f79
--- /dev/null
+++ b/Bindings/clock/qcom,sdm845-camcc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SDM845
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SDM845.
+
+  See also:: include/dt-bindings/clock/qcom,camcc-sm845.h
+
+properties:
+  compatible:
+    const: qcom,sdm845-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sdm845-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sdm845-dispcc.yaml b/Bindings/clock/qcom,sdm845-dispcc.yaml
new file mode 100644
index 0000000..719844d
--- /dev/null
+++ b/Bindings/clock/qcom,sdm845-dispcc.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SDM845
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SDM845.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-sdm845.h
+
+properties:
+  compatible:
+    const: qcom,sdm845-dispcc
+
+  # NOTE: sdm845.dtsi existed for quite some time and specified no clocks.
+  # The code had to use hardcoded mechanisms to find the input clocks.
+  # New dts files should have these clocks.
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: GPLL0 div source from GCC
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk_src
+      - const: gcc_disp_gpll0_div_clk_src
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dsi1_phy_pll_out_byteclk
+      - const: dsi1_phy_pll_out_dsiclk
+      - const: dp_link_clk_divsel_ten
+      - const: dp_vco_divided_clk_src_mux
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sdm845-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk_src",
+                    "gcc_disp_gpll0_div_clk_src",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dsi1_phy_pll_out_byteclk",
+                    "dsi1_phy_pll_out_dsiclk",
+                    "dp_link_clk_divsel_ten",
+                    "dp_vco_divided_clk_src_mux";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sdm845-lpasscc.yaml b/Bindings/clock/qcom,sdm845-lpasscc.yaml
new file mode 100644
index 0000000..a96fd83
--- /dev/null
+++ b/Bindings/clock/qcom,sdm845-lpasscc.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-lpasscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 LPASS Clock Controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm SDM845 LPASS (Low Power Audio SubSystem) Clock Controller.
+
+  See also:: include/dt-bindings/clock/qcom,lpass-sdm845.h
+
+properties:
+  compatible:
+    const: qcom,sdm845-lpasscc
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: cc
+      - const: qdsp6ss
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@17014000 {
+        compatible = "qcom,sdm845-lpasscc";
+        reg = <0x17014000 0x1f004>, <0x17300000 0x200>;
+        reg-names = "cc", "qdsp6ss";
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/qcom,sdx75-gcc.yaml b/Bindings/clock/qcom,sdx75-gcc.yaml
new file mode 100644
index 0000000..98921fa
--- /dev/null
+++ b/Bindings/clock/qcom,sdx75-gcc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdx75-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SDX75
+
+maintainers:
+  - Imran Shaik <quic_imrashai@quicinc.com>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDX75
+
+  See also:: include/dt-bindings/clock/qcom,sdx75-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sdx75-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: EMAC0 sgmiiphy mac rclk source
+      - description: EMAC0 sgmiiphy mac tclk source
+      - description: EMAC0 sgmiiphy rclk source
+      - description: EMAC0 sgmiiphy tclk source
+      - description: EMAC1 sgmiiphy mac rclk source
+      - description: EMAC1 sgmiiphy mac tclk source
+      - description: EMAC1 sgmiiphy rclk source
+      - description: EMAC1 sgmiiphy tclk source
+      - description: PCIE20 phy aux clock source
+      - description: PCIE_1 Pipe clock source
+      - description: PCIE_2 Pipe clock source
+      - description: PCIE Pipe clock source
+      - description: USB3 phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@80000 {
+      compatible = "qcom,sdx75-gcc";
+      reg = <0x80000 0x1f7400>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, <&emac0_sgmiiphy_mac_rclk>,
+               <&emac0_sgmiiphy_mac_tclk>, <&emac0_sgmiiphy_rclk>, <&emac0_sgmiiphy_tclk>,
+               <&emac1_sgmiiphy_mac_rclk>, <&emac1_sgmiiphy_mac_tclk>, <&emac1_sgmiiphy_rclk>,
+               <&emac1_sgmiiphy_tclk>, <&pcie20_phy_aux_clk>, <&pcie_1_pipe_clk>,
+               <&pcie_2_pipe_clk>, <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sm4450-gcc.yaml b/Bindings/clock/qcom,sm4450-gcc.yaml
new file mode 100644
index 0000000..5953c8d
--- /dev/null
+++ b/Bindings/clock/qcom,sm4450-gcc.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm4450-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM4450
+
+maintainers:
+  - Ajit Pandey <quic_ajipan@quicinc.com>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM4450
+
+  See also:: include/dt-bindings/clock/qcom,sm4450-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sm4450-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: UFS Phy Rx symbol 0 clock source
+      - description: UFS Phy Rx symbol 1 clock source
+      - description: UFS Phy Tx symbol 0 clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,sm4450-gcc";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>,
+               <&ufs_mem_phy 0>, <&ufs_mem_phy 1>,
+               <&ufs_mem_phy 2>, <&usb_1_qmpphy>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/qcom,sm6115-dispcc.yaml b/Bindings/clock/qcom,sm6115-dispcc.yaml
new file mode 100644
index 0000000..f802a2e
--- /dev/null
+++ b/Bindings/clock/qcom,sm6115-dispcc.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6115-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock Controller for SM6115
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks and power domains
+  on SM6115.
+
+  See also:: include/dt-bindings/clock/qcom,sm6115-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6115-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: GPLL0 DISP DIV clock from GCC
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6115-dispcc";
+      reg = <0x5f00000 0x20000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sm6115-gpucc.yaml b/Bindings/clock/qcom,sm6115-gpucc.yaml
new file mode 100644
index 0000000..cf19f44
--- /dev/null
+++ b/Bindings/clock/qcom,sm6115-gpucc.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6115-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SM6115
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm graphics clock control module provides clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also:: include/dt-bindings/clock/qcom,sm6115-gpucc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6115-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 main div source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        clock-controller@5990000 {
+            compatible = "qcom,sm6115-gpucc";
+            reg = <0x05990000 0x9000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Bindings/clock/qcom,sm6125-gpucc.yaml b/Bindings/clock/qcom,sm6125-gpucc.yaml
new file mode 100644
index 0000000..374a184
--- /dev/null
+++ b/Bindings/clock/qcom,sm6125-gpucc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6125-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SM6125
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm graphics clock control module provides clocks and power domains on
+  Qualcomm SoCs.
+
+  See also:: include/dt-bindings/clock/qcom,sm6125-gpucc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6125-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6125.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        clock-controller@5990000 {
+            compatible = "qcom,sm6125-gpucc";
+            reg = <0x05990000 0x9000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>;
+            #clock-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Bindings/clock/qcom,sm6350-camcc.yaml b/Bindings/clock/qcom,sm6350-camcc.yaml
new file mode 100644
index 0000000..fd6658c
--- /dev/null
+++ b/Bindings/clock/qcom,sm6350-camcc.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6350-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM6350
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and  power
+  domains on SM6350.
+
+  See also:: include/dt-bindings/clock/qcom,sm6350-camcc.h
+
+properties:
+  compatible:
+    const: qcom,sm6350-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sm6350-camcc";
+      reg = <0x0ad00000 0x16000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sm6375-dispcc.yaml b/Bindings/clock/qcom,sm6375-dispcc.yaml
new file mode 100644
index 0000000..183b1c7
--- /dev/null
+++ b/Bindings/clock/qcom,sm6375-dispcc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6375-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SM6375
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM6375.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-sm6375.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+
+required:
+  - compatible
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm6375-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6375-dispcc";
+      reg = <0x05f00000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sm6375-gcc.yaml b/Bindings/clock/qcom,sm6375-gcc.yaml
new file mode 100644
index 0000000..295d4bb
--- /dev/null
+++ b/Bindings/clock/qcom,sm6375-gcc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6375-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM6375
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM6375
+
+  See also:: include/dt-bindings/clock/qcom,sm6375-gcc.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO Active-Only source
+      - description: Sleep clock source
+
+required:
+  - compatible
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@1400000 {
+      compatible = "qcom,sm6375-gcc";
+      reg = <0x01400000 0x1f0000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+               <&sleep_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/qcom,sm6375-gpucc.yaml b/Bindings/clock/qcom,sm6375-gpucc.yaml
new file mode 100644
index 0000000..cf4cad7
--- /dev/null
+++ b/Bindings/clock/qcom,sm6375-gpucc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6375-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SM6375
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm graphics clock control module provides clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also:: include/dt-bindings/clock/qcom,sm6375-gpucc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6375-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+      - description: SNoC DVM GFX source
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the VDD_GX power rail
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required VDD_GX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+  - required-opps
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm6375-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@5990000 {
+            compatible = "qcom,sm6375-gpucc";
+            reg = <0 0x05990000 0 0x9000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>,
+                     <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+            power-domains = <&rpmpd SM6375_VDDGX>;
+            required-opps = <&rpmpd_opp_low_svs>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Bindings/clock/qcom,sm7150-gcc.yaml b/Bindings/clock/qcom,sm7150-gcc.yaml
new file mode 100644
index 0000000..0eb76d9
--- /dev/null
+++ b/Bindings/clock/qcom,sm7150-gcc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm7150-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM7150
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Danila Tikhonov <danila@jiaxyga.com>
+  - David Wronek <davidwronek@gmail.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM7150
+
+  See also:: include/dt-bindings/clock/qcom,sm7150-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sm7150-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO Active-Only source
+      - description: Sleep clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,sm7150-gcc";
+      reg = <0x00100000 0x001f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sm8350-videocc.yaml b/Bindings/clock/qcom,sm8350-videocc.yaml
new file mode 100644
index 0000000..46d1d91
--- /dev/null
+++ b/Bindings/clock/qcom,sm8350-videocc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8350-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Video Clock & Reset Controller
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm video clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also::
+    include/dt-bindings/clock/qcom,videocc-sm8350.h
+    include/dt-bindings/reset/qcom,videocc-sm8350.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-videocc
+      - qcom,sm8350-videocc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Board sleep clock
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+  - required-opps
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    clock-controller@abf0000 {
+      compatible = "qcom,sm8350-videocc";
+      reg = <0x0abf0000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sm8450-camcc.yaml b/Bindings/clock/qcom,sm8450-camcc.yaml
new file mode 100644
index 0000000..dc3c18e
--- /dev/null
+++ b/Bindings/clock/qcom,sm8450-camcc.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM8450
+
+maintainers:
+  - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SM8450.
+
+  See also::
+    include/dt-bindings/clock/qcom,sm8450-camcc.h
+    include/dt-bindings/clock/qcom,sm8550-camcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-camcc
+      - qcom,sm8550-camcc
+
+  clocks:
+    items:
+      - description: Camera AHB clock from GCC
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  power-domains:
+    maxItems: 1
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+
+  required-opps:
+    maxItems: 1
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - required-opps
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@ade0000 {
+      compatible = "qcom,sm8450-camcc";
+      reg = <0xade0000 0x20000>;
+      clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sm8450-dispcc.yaml b/Bindings/clock/qcom,sm8450-dispcc.yaml
new file mode 100644
index 0000000..2f22310
--- /dev/null
+++ b/Bindings/clock/qcom,sm8450-dispcc.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller for SM8450
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM8450.
+
+  See also:: include/dt-bindings/clock/qcom,sm8450-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-dispcc
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: Display's AHB clock
+      - description: sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY0
+      - description: VCO DIV clock from DP PHY0
+      - description: Link clock from DP PHY1
+      - description: VCO DIV clock from DP PHY1
+      - description: Link clock from DP PHY2
+      - description: VCO DIV clock from DP PHY2
+      - description: Link clock from DP PHY3
+      - description: VCO DIV clock from DP PHY3
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm8450-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Bindings/clock/qcom,sm8450-gpucc.yaml b/Bindings/clock/qcom,sm8450-gpucc.yaml
new file mode 100644
index 0000000..2320be9
--- /dev/null
+++ b/Bindings/clock/qcom,sm8450-gpucc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SM8450
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm graphics clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also::
+    include/dt-bindings/clock/qcom,sm8450-gpucc.h
+    include/dt-bindings/clock/qcom,sm8550-gpucc.h
+    include/dt-bindings/reset/qcom,sm8450-gpucc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-gpucc
+      - qcom,sm8550-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@3d90000 {
+            compatible = "qcom,sm8450-gpucc";
+            reg = <0 0x03d90000 0 0xa000>;
+            clocks = <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Bindings/clock/qcom,sm8450-videocc.yaml b/Bindings/clock/qcom,sm8450-videocc.yaml
new file mode 100644
index 0000000..bad8f01
--- /dev/null
+++ b/Bindings/clock/qcom,sm8450-videocc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller on SM8450
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm video clock control module provides the clocks, resets and power
+  domains on SM8450.
+
+  See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-videocc
+      - qcom,sm8550-videocc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Video AHB clock from GCC
+
+  power-domains:
+    maxItems: 1
+    description:
+      MMCX power domain.
+
+  required-opps:
+    maxItems: 1
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - required-opps
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    videocc: clock-controller@aaf0000 {
+      compatible = "qcom,sm8450-videocc";
+      reg = <0x0aaf0000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_VIDEO_AHB_CLK>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/qcom,sm8550-dispcc.yaml b/Bindings/clock/qcom,sm8550-dispcc.yaml
new file mode 100644
index 0000000..c129f8c
--- /dev/null
+++ b/Bindings/clock/qcom,sm8550-dispcc.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8550-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller for SM8550
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM8550.
+
+  See also:: include/dt-bindings/clock/qcom,sm8550-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8550-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: Display's AHB clock
+      - description: sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY0
+      - description: VCO DIV clock from DP PHY0
+      - description: Link clock from DP PHY1
+      - description: VCO DIV clock from DP PHY1
+      - description: Link clock from DP PHY2
+      - description: VCO DIV clock from DP PHY2
+      - description: Link clock from DP PHY3
+      - description: VCO DIV clock from DP PHY3
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm8550-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>,
+               <&dp0_phy 0>,
+               <&dp0_phy 1>,
+               <&dp1_phy 0>,
+               <&dp1_phy 1>,
+               <&dp2_phy 0>,
+               <&dp2_phy 1>,
+               <&dp3_phy 0>,
+               <&dp3_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Bindings/clock/qcom,sm8550-gcc.yaml b/Bindings/clock/qcom,sm8550-gcc.yaml
new file mode 100644
index 0000000..0c706de
--- /dev/null
+++ b/Bindings/clock/qcom,sm8550-gcc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8550-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8550
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8550
+
+  See also:: include/dt-bindings/clock/qcom,sm8550-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sm8550-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source
+      - description: PCIE 1 Pipe clock source
+      - description: PCIE 1 Phy Auxiliary clock source
+      - description: UFS Phy Rx symbol 0 clock source
+      - description: UFS Phy Rx symbol 1 clock source
+      - description: UFS Phy Tx symbol 0 clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,sm8550-gcc";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>,
+               <&pcie0_phy>,
+               <&pcie1_phy>,
+               <&pcie_1_phy_aux_clk>,
+               <&ufs_mem_phy 0>,
+               <&ufs_mem_phy 1>,
+               <&ufs_mem_phy 2>,
+               <&usb_1_qmpphy>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/qcom,sm8550-tcsr.yaml b/Bindings/clock/qcom,sm8550-tcsr.yaml
new file mode 100644
index 0000000..1bf1a41
--- /dev/null
+++ b/Bindings/clock/qcom,sm8550-tcsr.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8550-tcsr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm TCSR Clock Controller on SM8550
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm TCSR clock control module provides the clocks, resets and
+  power domains on SM8550
+
+  See also:: include/dt-bindings/clock/qcom,sm8550-tcsr.h
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sm8550-tcsr
+      - const: syscon
+
+  clocks:
+    items:
+      - description: TCXO pad clock
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    clock-controller@1fc0000 {
+      compatible = "qcom,sm8550-tcsr", "syscon";
+      reg = <0x1fc0000 0x30000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/qcom,spmi-clkdiv.yaml b/Bindings/clock/qcom,spmi-clkdiv.yaml
new file mode 100644
index 0000000..16c95ad
--- /dev/null
+++ b/Bindings/clock/qcom,spmi-clkdiv.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,spmi-clkdiv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI PMIC clock divider
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+  Qualcomm SPMI PMIC clock divider configures the clock frequency of a set of
+  outputs on the PMIC.  These clocks are typically wired through alternate
+  functions on GPIO pins.
+
+properties:
+  compatible:
+    const: qcom,spmi-clkdiv
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: xo
+
+  "#clock-cells":
+    const: 1
+
+  qcom,num-clkdivs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of CLKDIV peripherals.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - qcom,num-clkdivs
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        clock-controller@5b00 {
+            compatible = "qcom,spmi-clkdiv";
+            reg = <0x5b00>;
+            clocks = <&xo_board>;
+            clock-names = "xo";
+            #clock-cells = <1>;
+            qcom,num-clkdivs = <3>;
+
+            assigned-clocks = <&pm8998_clk_divs 1>,
+                              <&pm8998_clk_divs 2>,
+                              <&pm8998_clk_divs 3>;
+            assigned-clock-rates = <9600000>,
+                                   <9600000>,
+                                   <9600000>;
+        };
+    };
diff --git a/Bindings/clock/qcom,turingcc.txt b/Bindings/clock/qcom,turingcc.txt
new file mode 100644
index 0000000..126517d
--- /dev/null
+++ b/Bindings/clock/qcom,turingcc.txt
@@ -0,0 +1,19 @@
+Qualcomm Turing Clock & Reset Controller Binding
+------------------------------------------------
+
+Required properties :
+- compatible: shall contain "qcom,qcs404-turingcc".
+- reg: shall contain base register location and length.
+- clocks: ahb clock for the TuringCC
+- #clock-cells: from common clock binding, shall contain 1.
+- #reset-cells: from common reset binding, shall contain 1.
+
+Example:
+	turingcc: clock-controller@800000 {
+		compatible = "qcom,qcs404-turingcc";
+		reg = <0x00800000 0x30000>;
+		clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
diff --git a/Bindings/clock/qcom,videocc.yaml b/Bindings/clock/qcom,videocc.yaml
new file mode 100644
index 0000000..6999e36
--- /dev/null
+++ b/Bindings/clock/qcom,videocc.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm video clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also::
+    include/dt-bindings/clock/qcom,videocc-sc7180.h
+    include/dt-bindings/clock/qcom,videocc-sc7280.h
+    include/dt-bindings/clock/qcom,videocc-sdm845.h
+    include/dt-bindings/clock/qcom,videocc-sm8150.h
+    include/dt-bindings/clock/qcom,videocc-sm8250.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-videocc
+      - qcom,sc7280-videocc
+      - qcom,sdm845-videocc
+      - qcom,sm8150-videocc
+      - qcom,sm8250-videocc
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7180-videocc
+            - qcom,sdm845-videocc
+            - qcom,sm8150-videocc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+        clock-names:
+          items:
+            - const: bi_tcxo
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7280-videocc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8250-videocc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: AHB
+            - description: Board XO source
+            - description: Board active XO source
+        clock-names:
+          items:
+            - const: iface
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@ab00000 {
+      compatible = "qcom,sdm845-videocc";
+      reg = <0x0ab00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Bindings/clock/qoriq-clock.txt b/Bindings/clock/qoriq-clock.txt
new file mode 100644
index 0000000..10119d9
--- /dev/null
+++ b/Bindings/clock/qoriq-clock.txt
@@ -0,0 +1,212 @@
+* Clock Block on Freescale QorIQ Platforms
+
+Freescale QorIQ chips take primary clocking input from the external
+SYSCLK signal. The SYSCLK input (frequency) is multiplied using
+multiple phase locked loops (PLL) to create a variety of frequencies
+which can then be passed to a variety of internal logic, including
+cores and peripheral IP blocks.
+Please refer to the Reference Manual for details.
+
+All references to "1.0" and "2.0" refer to the QorIQ chassis version to
+which the chip complies.
+
+Chassis Version		Example Chips
+---------------		-------------
+1.0			p4080, p5020, p5040
+2.0			t4240, b4860
+
+1. Clock Block Binding
+
+Required properties:
+- compatible: Should contain a chip-specific clock block compatible
+	string and (if applicable) may contain a chassis-version clock
+	compatible string.
+
+	Chip-specific strings are of the form "fsl,<chip>-clockgen", such as:
+	* "fsl,p2041-clockgen"
+	* "fsl,p3041-clockgen"
+	* "fsl,p4080-clockgen"
+	* "fsl,p5020-clockgen"
+	* "fsl,p5040-clockgen"
+	* "fsl,t1023-clockgen"
+	* "fsl,t1024-clockgen"
+	* "fsl,t1040-clockgen"
+	* "fsl,t1042-clockgen"
+	* "fsl,t2080-clockgen"
+	* "fsl,t2081-clockgen"
+	* "fsl,t4240-clockgen"
+	* "fsl,b4420-clockgen"
+	* "fsl,b4860-clockgen"
+	* "fsl,ls1012a-clockgen"
+	* "fsl,ls1021a-clockgen"
+	* "fsl,ls1028a-clockgen"
+	* "fsl,ls1043a-clockgen"
+	* "fsl,ls1046a-clockgen"
+	* "fsl,ls1088a-clockgen"
+	* "fsl,ls2080a-clockgen"
+	* "fsl,lx2160a-clockgen"
+	Chassis-version clock strings include:
+	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
+	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
+- reg: Describes the address of the device's resources within the
+	address space defined by its parent bus, and resource zero
+	represents the clock register set
+
+Optional properties:
+- ranges: Allows valid translation between child's address space and
+	parent's. Must be present if the device has sub-nodes.
+- #address-cells: Specifies the number of cells used to represent
+	physical base addresses.  Must be present if the device has
+	sub-nodes and set to 1 if present
+- #size-cells: Specifies the number of cells used to represent
+	the size of an address. Must be present if the device has
+	sub-nodes and set to 1 if present
+- clock-frequency: Input system clock frequency (SYSCLK)
+- clocks: If clock-frequency is not specified, sysclk may be provided
+	as an input clock.  Either clock-frequency or clocks must be
+	provided.
+	A second input clock, called "coreclk", may be provided if
+	core PLLs are based on a different input clock from the
+	platform PLL.
+- clock-names: Required if a coreclk is present.  Valid names are
+	"sysclk" and "coreclk".
+
+2. Clock Provider
+
+The clockgen node should act as a clock provider, though in older device
+trees the children of the clockgen node are the clock providers.
+
+When the clockgen node is a clock provider, #clock-cells = <2>.
+The first cell of the clock specifier is the clock type, and the
+second cell is the clock index for the specified type.
+
+	Type#	Name		Index Cell
+	0	sysclk		must be 0
+	1	cmux		index (n in CLKCnCSR)
+	2	hwaccel		index (n in CLKCGnHWACSR)
+	3	fman		0 for fm1, 1 for fm2
+	4	platform pll	n=pll/(n+1). For example, when n=1,
+				that means output_freq=PLL_freq/2.
+	5	coreclk		must be 0
+
+3. Example
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+		clock-frequency = <133333333>;
+		reg = <0xe1000 0x1000>;
+		#clock-cells = <2>;
+	};
+
+	fman@400000 {
+		...
+		clocks = <&clockgen 3 0>;
+		...
+	};
+}
+4. Legacy Child Nodes
+
+NOTE: These nodes are deprecated.  Kernels should continue to support
+device trees with these nodes, but new device trees should not use them.
+
+Most of the bindings are from the common clock binding[1].
+ [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : Should include one of the following:
+	* "fsl,qoriq-core-pll-1.0" for core PLL clocks (v1.0)
+	* "fsl,qoriq-core-pll-2.0" for core PLL clocks (v2.0)
+	* "fsl,qoriq-core-mux-1.0" for core mux clocks (v1.0)
+	* "fsl,qoriq-core-mux-2.0" for core mux clocks (v2.0)
+	* "fsl,qoriq-sysclk-1.0": for input system clock (v1.0).
+		It takes parent's clock-frequency as its clock.
+	* "fsl,qoriq-sysclk-2.0": for input system clock (v2.0).
+		It takes parent's clock-frequency as its clock.
+	* "fsl,qoriq-platform-pll-1.0" for the platform PLL clock (v1.0)
+	* "fsl,qoriq-platform-pll-2.0" for the platform PLL clock (v2.0)
+- #clock-cells: From common clock binding. The number of cells in a
+	clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
+	clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
+	For "fsl,qoriq-core-pll-[1,2].0" clocks, the single
+	clock-specifier cell may take the following values:
+	* 0 - equal to the PLL frequency
+	* 1 - equal to the PLL frequency divided by 2
+	* 2 - equal to the PLL frequency divided by 4
+
+Recommended properties:
+- clocks: Should be the phandle of input parent clock
+- clock-names: From common clock binding, indicates the clock name
+- clock-output-names: From common clock binding, indicates the names of
+	output clocks
+- reg: Should be the offset and length of clock block base address.
+	The length should be 4.
+
+Legacy Example:
+/ {
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+		ranges = <0x0 0xe1000 0x1000>;
+		clock-frequency = <133333333>;
+		reg = <0xe1000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysclk: sysclk {
+			#clock-cells = <0>;
+			compatible = "fsl,qoriq-sysclk-1.0";
+			clock-output-names = "sysclk";
+		};
+
+		pll0: pll0@800 {
+			#clock-cells = <1>;
+			reg = <0x800 0x4>;
+			compatible = "fsl,qoriq-core-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll0", "pll0-div2";
+		};
+
+		pll1: pll1@820 {
+			#clock-cells = <1>;
+			reg = <0x820 0x4>;
+			compatible = "fsl,qoriq-core-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll1", "pll1-div2";
+		};
+
+		mux0: mux0@0 {
+			#clock-cells = <0>;
+			reg = <0x0 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux0";
+		};
+
+		mux1: mux1@20 {
+			#clock-cells = <0>;
+			reg = <0x20 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux1";
+		};
+
+		platform-pll: platform-pll@c00 {
+			#clock-cells = <1>;
+			reg = <0xc00 0x4>;
+			compatible = "fsl,qoriq-platform-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "platform-pll", "platform-pll-div2";
+		};
+	};
+};
+
+Example for legacy clock consumer:
+
+/ {
+	cpu0: PowerPC,e5500@0 {
+		...
+		clocks = <&mux0>;
+		...
+	};
+};
diff --git a/Bindings/clock/renesas,5p35023.yaml b/Bindings/clock/renesas,5p35023.yaml
new file mode 100644
index 0000000..42b6f80
--- /dev/null
+++ b/Bindings/clock/renesas,5p35023.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,5p35023.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas 5p35023 VersaClock 3 programmable I2C clock generator
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  The 5P35023 is a VersaClock programmable clock generator and
+  is designed for low-power, consumer, and high-performance PCI
+  express applications. The 5P35023 device is a three PLL
+  architecture design, and each PLL is individually programmable
+  and allowing for up to 6 unique frequency outputs.
+
+  An internal OTP memory allows the user to store the configuration
+  in the device. After power up, the user can change the device register
+  settings through the I2C interface when I2C mode is selected.
+
+  The driver can read a full register map from the DT, and will use that
+  register map to initialize the attached part (via I2C) when the system
+  boots. Any configuration not supported by the common clock framework
+  must be done via the full register map, including optimized settings.
+
+  Link to datasheet:
+  https://www.renesas.com/us/en/products/clocks-timing/clock-generation/programmable-clocks/5p35023-versaclock-3s-programmable-clock-generator
+
+properties:
+  compatible:
+    enum:
+      - renesas,5p35023
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      The index in the assigned-clocks is mapped to the output clock as below
+      0 - REF, 1 - SE1, 2 - SE2, 3 - SE3, 4 - DIFF1, 5 - DIFF2.
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  renesas,settings:
+    description: Optional, complete register map of the device.
+      Optimized settings for the device must be provided in full
+      and are written during initialization.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 37
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        versa3: clock-generator@68 {
+            compatible = "renesas,5p35023";
+            reg = <0x68>;
+            #clock-cells = <1>;
+
+            clocks = <&x1>;
+
+            renesas,settings = [
+                80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf
+                00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6
+                80 b0 45 c4 95
+            ];
+
+            assigned-clocks = <&versa3 0>, <&versa3 1>,
+                              <&versa3 2>, <&versa3 3>,
+                              <&versa3 4>, <&versa3 5>;
+            assigned-clock-rates = <24000000>, <11289600>,
+                                   <11289600>, <12000000>,
+                                   <25000000>, <12288000>;
+        };
+    };
diff --git a/Bindings/clock/renesas,9series.yaml b/Bindings/clock/renesas,9series.yaml
new file mode 100644
index 0000000..3afdebd
--- /dev/null
+++ b/Bindings/clock/renesas,9series.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,9series.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas 9-series I2C PCIe clock generators
+
+description: |
+  The Renesas 9-series are I2C PCIe clock generators providing
+  from 1 to 20 output clocks.
+
+  When referencing the provided clock in the DT using phandle
+  and clock specifier, the following mapping applies:
+
+  - 9FGV0241:
+    0 -- DIF0
+    1 -- DIF1
+  - 9FGV0441:
+    0 -- DIF0
+    1 -- DIF1
+    2 -- DIF2
+    3 -- DIF3
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  compatible:
+    enum:
+      - renesas,9fgv0241
+      - renesas,9fgv0441
+
+  reg:
+    description: I2C device address
+    enum: [ 0x68, 0x6a ]
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: XTal input clock
+
+  renesas,out-amplitude-microvolt:
+    enum: [ 600000, 700000, 800000, 900000 ]
+    description: Output clock signal amplitude
+
+  renesas,out-spread-spectrum:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 100000, 99750, 99500 ]
+    description: Output clock down spread in pcm (1/1000 of percent)
+
+patternProperties:
+  "^DIF[0-19]$":
+    type: object
+    description:
+      Description of one of the outputs (DIF0..DIF19).
+
+    properties:
+      renesas,slew-rate:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 2000000, 3000000 ]
+        description: Output clock slew rate select in V/ns
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    /* 25MHz reference crystal */
+    ref25: ref25m {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <25000000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rs9: clock-generator@6a {
+            compatible = "renesas,9fgv0241";
+            reg = <0x6a>;
+            #clock-cells = <1>;
+
+            clocks = <&ref25m>;
+
+            DIF0 {
+                renesas,slew-rate = <3000000>;
+            };
+        };
+    };
+
+...
diff --git a/Bindings/clock/renesas,cpg-clocks.yaml b/Bindings/clock/renesas,cpg-clocks.yaml
new file mode 100644
index 0000000..9185d10
--- /dev/null
+++ b/Bindings/clock/renesas,cpg-clocks.yaml
@@ -0,0 +1,241 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Clock Pulse Generator (CPG)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Clock Pulse Generator (CPG) generates core clocks for the SoC.  It
+  includes PLLs, and fixed and variable ratio dividers.
+
+  The CPG may also provide a Clock Domain for SoC devices, in combination with
+  the CPG Module Stop (MSTP) Clocks.
+
+properties:
+  compatible:
+    oneOf:
+      - const: renesas,r8a73a4-cpg-clocks     # R-Mobile APE6
+      - const: renesas,r8a7740-cpg-clocks     # R-Mobile A1
+      - const: renesas,r8a7778-cpg-clocks     # R-Car M1
+      - const: renesas,r8a7779-cpg-clocks     # R-Car H1
+      - items:
+          - enum:
+              - renesas,r7s72100-cpg-clocks   # RZ/A1H
+          - const: renesas,rz-cpg-clocks      # RZ/A1
+      - const: renesas,sh73a0-cpg-clocks      # SH-Mobile AG5
+
+  reg:
+    maxItems: 1
+
+  clocks: true
+
+  '#clock-cells':
+    const: 1
+
+  clock-output-names: true
+
+  renesas,mode:
+    description: Board-specific settings of the MD_CK* bits on R-Mobile A1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+
+  '#power-domain-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - clock-output-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r8a73a4-cpg-clocks
+    then:
+      properties:
+        clocks:
+          items:
+            - description: extal1
+            - description: extal2
+
+        clock-output-names:
+          items:
+            - const: main
+            - const: pll0
+            - const: pll1
+            - const: pll2
+            - const: pll2s
+            - const: pll2h
+            - const: z
+            - const: z2
+            - const: i
+            - const: m3
+            - const: b
+            - const: m1
+            - const: m2
+            - const: zx
+            - const: zs
+            - const: hp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r8a7740-cpg-clocks
+    then:
+      properties:
+        clocks:
+          items:
+            - description: extal1
+            - description: extal2
+            - description: extalr
+
+        clock-output-names:
+          items:
+            - const: system
+            - const: pllc0
+            - const: pllc1
+            - const: pllc2
+            - const: r
+            - const: usb24s
+            - const: i
+            - const: zg
+            - const: b
+            - const: m1
+            - const: hp
+            - const: hpp
+            - const: usbp
+            - const: s
+            - const: zb
+            - const: m3
+            - const: cp
+
+      required:
+        - renesas,mode
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r8a7778-cpg-clocks
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-output-names:
+          items:
+            - const: plla
+            - const: pllb
+            - const: b
+            - const: out
+            - const: p
+            - const: s
+            - const: s1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r8a7779-cpg-clocks
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-output-names:
+          items:
+            - const: plla
+            - const: z
+            - const: zs
+            - const: s
+            - const: s1
+            - const: p
+            - const: b
+            - const: out
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r7s72100-cpg-clocks
+    then:
+      properties:
+        clocks:
+          items:
+            - description: extal1
+            - description: usb_x1
+
+        clock-output-names:
+          items:
+            - const: pll
+            - const: i
+            - const: g
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,sh73a0-cpg-clocks
+    then:
+      properties:
+        clocks:
+          items:
+            - description: extal1
+            - description: extal2
+
+        clock-output-names:
+          items:
+            - const: main
+            - const: pll0
+            - const: pll1
+            - const: pll2
+            - const: pll3
+            - const: dsi0phy
+            - const: dsi1phy
+            - const: zg
+            - const: m3
+            - const: b
+            - const: m1
+            - const: m2
+            - const: z
+            - const: zx
+            - const: hp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r8a7778-cpg-clocks
+              - renesas,r8a7779-cpg-clocks
+              - renesas,rz-cpg-clocks
+    then:
+      required:
+        - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7740-clock.h>
+    cpg_clocks: cpg_clocks@e6150000 {
+            compatible = "renesas,r8a7740-cpg-clocks";
+            reg = <0xe6150000 0x10000>;
+            clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
+            #clock-cells = <1>;
+            clock-output-names = "system", "pllc0", "pllc1", "pllc2", "r",
+                                 "usb24s", "i", "zg", "b", "m1", "hp", "hpp",
+                                 "usbp", "s", "zb", "m3", "cp";
+            renesas,mode = <0x05>;
+    };
diff --git a/Bindings/clock/renesas,cpg-div6-clock.yaml b/Bindings/clock/renesas,cpg-div6-clock.yaml
new file mode 100644
index 0000000..2197c95
--- /dev/null
+++ b/Bindings/clock/renesas,cpg-div6-clock.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-div6-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas CPG DIV6 Clock
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse
+  Generator (CPG). Their clock input is divided by a configurable factor from 1
+  to 64.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a73a4-div6-clock # R-Mobile APE6
+          - renesas,r8a7740-div6-clock # R-Mobile A1
+          - renesas,sh73a0-div6-clock  # SH-Mobile AG5
+      - const: renesas,cpg-div6-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    oneOf:
+      - maxItems: 1
+      - maxItems: 4
+      - maxItems: 8
+    description:
+      For clocks with multiple parents, invalid settings must be specified as
+      "<0>".
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a73a4-clock.h>
+
+    cpg_clocks: cpg_clocks@e6150000 {
+            compatible = "renesas,r8a73a4-cpg-clocks";
+            reg = <0xe6150000 0x10000>;
+            clocks = <&extal1_clk>, <&extal2_clk>;
+            #clock-cells = <1>;
+            clock-output-names = "main", "pll0", "pll1", "pll2",
+                                  "pll2s", "pll2h", "z", "z2",
+                                  "i", "m3", "b", "m1", "m2",
+                                  "zx", "zs", "hp";
+    };
+
+    sdhi2_clk: sdhi2_clk@e615007c {
+            compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+            reg = <0xe615007c 4>;
+            clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>,
+                     <&extal2_clk>;
+            #clock-cells = <0>;
+    };
diff --git a/Bindings/clock/renesas,cpg-mssr.yaml b/Bindings/clock/renesas,cpg-mssr.yaml
new file mode 100644
index 0000000..9c3dc6c
--- /dev/null
+++ b/Bindings/clock/renesas,cpg-mssr.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-mssr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Clock Pulse Generator / Module Standby and Software Reset
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator)
+  and MSSR (Module Standby and Software Reset) blocks are intimately connected,
+  and share the same register block.
+
+  They provide the following functionalities:
+    - The CPG block generates various core clocks,
+    - The MSSR block provides two functions:
+        1. Module Standby, providing a Clock Domain to control the clock supply
+           to individual SoC devices,
+        2. Reset Control, to perform a software reset of individual SoC devices.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r7s9210-cpg-mssr  # RZ/A2
+      - renesas,r8a7742-cpg-mssr  # RZ/G1H
+      - renesas,r8a7743-cpg-mssr  # RZ/G1M
+      - renesas,r8a7744-cpg-mssr  # RZ/G1N
+      - renesas,r8a7745-cpg-mssr  # RZ/G1E
+      - renesas,r8a77470-cpg-mssr # RZ/G1C
+      - renesas,r8a774a1-cpg-mssr # RZ/G2M
+      - renesas,r8a774b1-cpg-mssr # RZ/G2N
+      - renesas,r8a774c0-cpg-mssr # RZ/G2E
+      - renesas,r8a774e1-cpg-mssr # RZ/G2H
+      - renesas,r8a7790-cpg-mssr  # R-Car H2
+      - renesas,r8a7791-cpg-mssr  # R-Car M2-W
+      - renesas,r8a7792-cpg-mssr  # R-Car V2H
+      - renesas,r8a7793-cpg-mssr  # R-Car M2-N
+      - renesas,r8a7794-cpg-mssr  # R-Car E2
+      - renesas,r8a7795-cpg-mssr  # R-Car H3
+      - renesas,r8a7796-cpg-mssr  # R-Car M3-W
+      - renesas,r8a77961-cpg-mssr # R-Car M3-W+
+      - renesas,r8a77965-cpg-mssr # R-Car M3-N
+      - renesas,r8a77970-cpg-mssr # R-Car V3M
+      - renesas,r8a77980-cpg-mssr # R-Car V3H
+      - renesas,r8a77990-cpg-mssr # R-Car E3
+      - renesas,r8a77995-cpg-mssr # R-Car D3
+      - renesas,r8a779a0-cpg-mssr # R-Car V3U
+      - renesas,r8a779f0-cpg-mssr # R-Car S4-8
+      - renesas,r8a779g0-cpg-mssr # R-Car V4H
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - extal     # All
+        - extalr    # Most R-Car Gen3 and RZ/G2
+        - usb_extal # Most R-Car Gen2 and RZ/G1
+
+  '#clock-cells':
+    description: |
+      - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+        and a core clock reference, as defined in
+        <dt-bindings/clock/*-cpg-mssr.h>
+      - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+        a module number, as defined in the datasheet.
+    const: 2
+
+  '#power-domain-cells':
+    description:
+      SoC devices that are part of the CPG/MSSR Clock Domain and can be
+      power-managed through Module Standby should refer to the CPG device node
+      in their "power-domains" property, as documented by the generic PM Domain
+      bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
+    const: 0
+
+  '#reset-cells':
+    description:
+      The single reset specifier cell must be the module number, as defined in
+      the datasheet.
+    const: 1
+
+if:
+  not:
+    properties:
+      compatible:
+        items:
+          enum:
+            - renesas,r7s9210-cpg-mssr
+then:
+  required:
+    - '#reset-cells'
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    cpg: clock-controller@e6150000 {
+            compatible = "renesas,r8a7795-cpg-mssr";
+            reg = <0xe6150000 0x1000>;
+            clocks = <&extal_clk>, <&extalr_clk>;
+            clock-names = "extal", "extalr";
+            #clock-cells = <2>;
+            #power-domain-cells = <0>;
+            #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/renesas,cpg-mstp-clocks.yaml b/Bindings/clock/renesas,cpg-mstp-clocks.yaml
new file mode 100644
index 0000000..9752ac6
--- /dev/null
+++ b/Bindings/clock/renesas,cpg-mstp-clocks.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-mstp-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Clock Pulse Generator (CPG) Module Stop (MSTP) Clocks
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Clock Pulse Generator (CPG) can gate SoC device clocks. The gates are
+  organized in groups of up to 32 gates.
+
+  This device tree binding describes a single 32 gate clocks group per node.
+  Clocks are referenced by user nodes by the Module Stop (MSTP) node phandle
+  and the clock index in the group, from 0 to 31.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r7s72100-mstp-clocks # RZ/A1
+          - renesas,r8a73a4-mstp-clocks  # R-Mobile APE6
+          - renesas,r8a7740-mstp-clocks  # R-Mobile A1
+          - renesas,r8a7778-mstp-clocks  # R-Car M1
+          - renesas,r8a7779-mstp-clocks  # R-Car H1
+          - renesas,sh73a0-mstp-clocks   # SH-Mobile AG5
+      - const: renesas,cpg-mstp-clocks
+
+  reg:
+    minItems: 1
+    items:
+      - description: Module Stop Control Register (MSTPCR)
+      - description: Module Stop Status Register (MSTPSR)
+
+  clocks:
+    minItems: 1
+    maxItems: 32
+
+  '#clock-cells':
+    const: 1
+
+  clock-indices:
+    minItems: 1
+    maxItems: 32
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 32
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - clock-indices
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a73a4-clock.h>
+    mstp2_clks: mstp2_clks@e6150138 {
+            compatible = "renesas,r8a73a4-mstp-clocks",
+                         "renesas,cpg-mstp-clocks";
+            reg = <0xe6150138 4>, <0xe6150040 4>;
+            clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+                     <&mp_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
+            #clock-cells = <1>;
+            clock-indices = <
+                    R8A73A4_CLK_SCIFA0 R8A73A4_CLK_SCIFA1
+                    R8A73A4_CLK_SCIFB0 R8A73A4_CLK_SCIFB1
+                    R8A73A4_CLK_SCIFB2 R8A73A4_CLK_SCIFB3
+                    R8A73A4_CLK_DMAC
+            >;
+            clock-output-names =
+                    "scifa0", "scifa1", "scifb0", "scifb1", "scifb2", "scifb3",
+                    "dmac";
+    };
diff --git a/Bindings/clock/renesas,emev2-smu.yaml b/Bindings/clock/renesas,emev2-smu.yaml
new file mode 100644
index 0000000..4d9a648
--- /dev/null
+++ b/Bindings/clock/renesas,emev2-smu.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,emev2-smu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas EMMA Mobile EV2 System Management Unit
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Magnus Damm <magnus.damm@gmail.com>
+
+description: |
+  The System Management Unit is described in user's manual R19UH0037EJ1000_SMU.
+  This is not a clock provider, but clocks under SMU depend on it.
+
+properties:
+  compatible:
+    const: renesas,emev2-smu
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+patternProperties:
+  ".*sclkdiv@.*":
+    type: object
+
+    description: |
+      Function block with an input mux and a divider, which corresponds to
+      "Serial clock generator" in fig. "Clock System Overview" of the manual,
+      and "xxx frequency division setting register" (XXXCLKDIV) registers.
+      This makes internal (neither input nor output) clock that is provided
+      to input of xxxGCLK block.
+
+    properties:
+      compatible:
+        const: renesas,emev2-smu-clkdiv
+
+      reg:
+        maxItems: 1
+        description:
+          Byte offset from SMU base and Bit position in the register.
+
+      clocks:
+        minItems: 1
+        maxItems: 4
+
+      '#clock-cells':
+        const: 0
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - '#clock-cells'
+
+    additionalProperties: false
+
+  ".*sclk@.*":
+    type: object
+
+    description: |
+      Clock gating node shown as "Clock stop processing block" in the
+      fig. "Clock System Overview" of the manual.
+      Registers are "xxx clock gate control register" (XXXGCLKCTRL).
+
+    properties:
+      compatible:
+        const: renesas,emev2-smu-gclk
+
+      reg:
+        maxItems: 1
+        description:
+          Byte offset from SMU base and Bit position in the register.
+
+      clocks:
+        maxItems: 1
+
+      '#clock-cells':
+        const: 0
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - '#clock-cells'
+
+    additionalProperties: false
+
+additionalProperties: true
+
+examples:
+  - |
+    // Example of clock-tree description:
+    //
+    //  This describes a clock path in the clock tree
+    //   c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk
+    clocks@e0110000 {
+            compatible = "renesas,emev2-smu";
+            reg = <0xe0110000 0x10000>;
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            c32ki: c32ki {
+                    compatible = "fixed-clock";
+                    clock-frequency = <32768>;
+                    #clock-cells = <0>;
+            };
+            pll3_fo: pll3_fo {
+                    compatible = "fixed-factor-clock";
+                    clocks = <&c32ki>;
+                    clock-div = <1>;
+                    clock-mult = <7000>;
+                    #clock-cells = <0>;
+            };
+            usia_u0_sclkdiv: usia_u0_sclkdiv@610,0 {
+                    compatible = "renesas,emev2-smu-clkdiv";
+                    reg = <0x610 0>;
+                    clocks = <&pll3_fo>;
+                    #clock-cells = <0>;
+            };
+            usia_u0_sclk: usia_u0_sclk@4a0,1 {
+                    compatible = "renesas,emev2-smu-gclk";
+                    reg = <0x4a0 1>;
+                    clocks = <&usia_u0_sclkdiv>;
+                    #clock-cells = <0>;
+            };
+    };
diff --git a/Bindings/clock/renesas,r9a06g032-sysctrl.yaml b/Bindings/clock/renesas,r9a06g032-sysctrl.yaml
new file mode 100644
index 0000000..26d94ce
--- /dev/null
+++ b/Bindings/clock/renesas,r9a06g032-sysctrl.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,r9a06g032-sysctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1D (R9A06G032) System Controller
+
+maintainers:
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    const: renesas,r9a06g032-sysctrl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: External 40 MHz crystal
+      - description: Optional external 32.768 kHz crystal
+      - description: Optional external JTAG input
+      - description: Optional external RGMII_REFCLK
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: mclk
+      - const: rtc
+      - const: jtag
+      - const: rgmii_ref_ext
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 0
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "^dma-router@[a-f0-9]+$":
+    type: object
+    $ref: /schemas/dma/renesas,rzn1-dmamux.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    sysctrl: system-controller@4000c000 {
+            compatible = "renesas,r9a06g032-sysctrl";
+            reg = <0x4000c000 0x1000>;
+            clocks = <&ext_mclk>, <&ext_rtc_clk>, <&ext_jtag_clk>,
+                     <&ext_rgmii_ref>;
+            clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+            #clock-cells = <1>;
+            #power-domain-cells = <0>;
+    };
diff --git a/Bindings/clock/renesas,rcar-usb2-clock-sel.yaml b/Bindings/clock/renesas,rcar-usb2-clock-sel.yaml
new file mode 100644
index 0000000..c84f29f
--- /dev/null
+++ b/Bindings/clock/renesas,rcar-usb2-clock-sel.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,rcar-usb2-clock-sel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car USB 2.0 clock selector
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+description: |
+  If you connect an external clock to the USB_EXTAL pin only, you should set
+  the clock rate to "usb_extal" node only.
+  If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module
+  is not needed because this is default setting. (Of course, you can set the
+  clock rates to both "usb_extal" and "usb_xtal" nodes.
+
+  Case 1: An external clock connects to R-Car SoC
+    +----------+   +--- R-Car ---------------------+
+    |External  |---|USB_EXTAL ---> all usb channels|
+    |clock     |   |USB_XTAL                       |
+    +----------+   +-------------------------------+
+
+  In this case, we need this driver with "usb_extal" clock.
+
+  Case 2: An oscillator connects to R-Car SoC
+    +----------+   +--- R-Car ---------------------+
+    |Oscillator|---|USB_EXTAL -+-> all usb channels|
+    |          |---|USB_XTAL --+                   |
+    +----------+   +-------------------------------+
+  In this case, we don't need this selector.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a774a1-rcar-usb2-clock-sel # RZ/G2M
+          - renesas,r8a774b1-rcar-usb2-clock-sel # RZ/G2N
+          - renesas,r8a774e1-rcar-usb2-clock-sel # RZ/G2H
+          - renesas,r8a7795-rcar-usb2-clock-sel  # R-Car H3
+          - renesas,r8a7796-rcar-usb2-clock-sel  # R-Car M3-W
+          - renesas,r8a77961-rcar-usb2-clock-sel # R-Car M3-W+
+      - const: renesas,rcar-gen3-usb2-clock-sel
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: ehci_ohci
+      - const: hs-usb-if
+      - const: usb_extal
+      - const: usb_xtal
+
+  '#clock-cells':
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: ehci_ohci
+      - const: hs-usb-if
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - power-domains
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    usb2_clksel: clock-controller@e6590630 {
+        compatible = "renesas,r8a7795-rcar-usb2-clock-sel",
+                     "renesas,rcar-gen3-usb2-clock-sel";
+        reg = <0xe6590630 0x02>;
+        clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+                 <&usb_extal>, <&usb_xtal>;
+        clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal";
+        #clock-cells = <0>;
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 703>, <&cpg 704>;
+        reset-names = "ehci_ohci", "hs-usb-if";
+    };
diff --git a/Bindings/clock/renesas,rzg2l-cpg.yaml b/Bindings/clock/renesas,rzg2l-cpg.yaml
new file mode 100644
index 0000000..80a8c71
--- /dev/null
+++ b/Bindings/clock/renesas,rzg2l-cpg.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/{G2L,V2L,V2M} Clock Pulse Generator / Module Standby Mode
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  On Renesas RZ/{G2L,V2L}-alike SoC's, the CPG (Clock Pulse Generator) and Module
+  Standby Mode share the same register block. On RZ/V2M, the functionality is
+  similar, but does not have Clock Monitor Registers.
+
+  They provide the following functionalities:
+    - The CPG block generates various core clocks,
+    - The Module Standby Mode block provides two functions:
+        1. Module Standby, providing a Clock Domain to control the clock supply
+           to individual SoC devices,
+        2. Reset Control, to perform a software reset of individual SoC devices.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2} and RZ/Five
+      - renesas,r9a07g044-cpg # RZ/G2{L,LC}
+      - renesas,r9a07g054-cpg # RZ/V2L
+      - renesas,r9a08g045-cpg # RZ/G3S
+      - renesas,r9a09g011-cpg # RZ/V2M
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      Clock source to CPG can be either from external clock input (EXCLK) or
+      crystal oscillator (XIN/XOUT).
+    const: extal
+
+  '#clock-cells':
+    description: |
+      - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+        and a core clock reference, as defined in
+        <dt-bindings/clock/r9a0*-cpg.h>,
+      - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+        a module number, as defined in <dt-bindings/clock/r9a0*-cpg.h>.
+    const: 2
+
+  '#power-domain-cells':
+    description:
+      SoC devices that are part of the CPG/Module Standby Mode Clock Domain and
+      can be power-managed through Module Standby should refer to the CPG device
+      node in their "power-domains" property, as documented by the generic PM
+      Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
+    const: 0
+
+  '#reset-cells':
+    description:
+      The single reset specifier cell must be the module number, as defined in
+      <dt-bindings/clock/r9a0*-cpg.h>.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    cpg: clock-controller@11010000 {
+            compatible = "renesas,r9a07g044-cpg";
+            reg = <0x11010000 0x10000>;
+            clocks = <&extal_clk>;
+            clock-names = "extal";
+            #clock-cells = <2>;
+            #power-domain-cells = <0>;
+            #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/renesas,versaclock7.yaml b/Bindings/clock/renesas,versaclock7.yaml
new file mode 100644
index 0000000..b339f1f
--- /dev/null
+++ b/Bindings/clock/renesas,versaclock7.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,versaclock7.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Versaclock7 Programmable Clock
+
+maintainers:
+  - Alex Helms <alexander.helms.jy@renesas.com>
+
+description: |
+  Renesas Versaclock7 is a family of configurable clock generator and
+  jitter attenuator ICs with fractional and integer dividers.
+
+properties:
+  '#clock-cells':
+    const: 1
+
+  compatible:
+    enum:
+      - renesas,rc21008a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: External crystal or oscillator
+
+  clock-names:
+    items:
+      - const: xin
+
+required:
+  - '#clock-cells'
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    vc7_xin: clock {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <49152000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        vc7: clock-controller@9 {
+            compatible = "renesas,rc21008a";
+            reg = <0x9>;
+            #clock-cells = <1>;
+            clocks = <&vc7_xin>;
+            clock-names = "xin";
+        };
+    };
diff --git a/Bindings/clock/rockchip,px30-cru.yaml b/Bindings/clock/rockchip,px30-cru.yaml
new file mode 100644
index 0000000..0f0f64b
--- /dev/null
+++ b/Bindings/clock/rockchip,px30-cru.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,px30-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PX30 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The PX30 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input       - required
+    - "xin32k"     - rtc clock           - optional
+    - "i2sx_clkin" - external I2S clock  - optional
+    - "gmac_clkin" - external GMAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-cru
+      - rockchip,px30-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Clock for both PMUCRU and CRU
+      - description: Clock for CRU (sourced from PMUCRU)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xin24m
+      - const: gpll
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#reset-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-cru
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+
+    pmucru: clock-controller@ff2bc000 {
+      compatible = "rockchip,px30-pmucru";
+      reg = <0xff2bc000 0x1000>;
+      clocks = <&xin24m>;
+      clock-names = "xin24m";
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+    cru: clock-controller@ff2b0000 {
+      compatible = "rockchip,px30-cru";
+      reg = <0xff2b0000 0x1000>;
+      clocks = <&xin24m>, <&pmucru PLL_GPLL>;
+      clock-names = "xin24m", "gpll";
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/rockchip,rk3036-cru.yaml b/Bindings/clock/rockchip,rk3036-cru.yaml
new file mode 100644
index 0000000..ba5b454
--- /dev/null
+++ b/Bindings/clock/rockchip,rk3036-cru.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3036-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3036 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3036 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input       - required
+    - "ext_i2s"    - external I2S clock  - optional
+    - "rmii_clkin" - external EMAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3036-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3036-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/rockchip,rk3128-cru.yaml b/Bindings/clock/rockchip,rk3128-cru.yaml
new file mode 100644
index 0000000..b3d9c8e
--- /dev/null
+++ b/Bindings/clock/rockchip,rk3128-cru.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3128-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3126/RK3128 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3126/RK3128 clock controller generates and supplies clock to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3126-cru
+      - rockchip,rk3128-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xin24m
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3128-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/rockchip,rk3188-cru.yaml b/Bindings/clock/rockchip,rk3188-cru.yaml
new file mode 100644
index 0000000..ddd7e46
--- /dev/null
+++ b/Bindings/clock/rockchip,rk3188-cru.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3188/RK3066 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
+  dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
+  Similar macros exist for the reset sources in these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"    - crystal input                 - required
+    - "xin32k"    - RTC clock                     - optional
+    - "xin27m"    - 27mhz crystal input on RK3066 - optional
+    - "ext_hsadc" - external HSADC clock          - optional
+    - "ext_cif0"  - external camera clock         - optional
+    - "ext_rmii"  - external RMII clock           - optional
+    - "ext_jtag"  - external JTAG clock           - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3066a-cru
+      - rockchip,rk3188-cru
+      - rockchip,rk3188a-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3188-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/rockchip,rk3228-cru.yaml b/Bindings/clock/rockchip,rk3228-cru.yaml
new file mode 100644
index 0000000..1050fff
--- /dev/null
+++ b/Bindings/clock/rockchip,rk3228-cru.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3228-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3228 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3228 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input                          - required
+    - "ext_i2s"     - external I2S clock                     - optional
+    - "ext_gmac"    - external GMAC clock                    - optional
+    - "ext_hsadc"   - external HSADC clock                   - optional
+    - "phy_50m_out" - output clock of the pll in the mac phy
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3228-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3228-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/rockchip,rk3288-cru.yaml b/Bindings/clock/rockchip,rk3288-cru.yaml
new file mode 100644
index 0000000..6655e97
--- /dev/null
+++ b/Bindings/clock/rockchip,rk3288-cru.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3288 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3288 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+
+  A revision of this SoC is available: rk3288w. The clock tree is a bit
+  different so another dt-compatible is available. Noticed that it is only
+  setting the difference but there is no automatic revision detection. This
+  should be performed by boot loaders.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input               - required,
+    - "xin32k"      - rtc clock                   - optional,
+    - "ext_i2s"     - external I2S clock          - optional,
+    - "ext_hsadc"   - external HSADC clock        - optional,
+    - "ext_edp_24m" - external display port clock - optional,
+    - "ext_vip"     - external VIP clock          - optional,
+    - "ext_isp"     - external ISP clock          - optional,
+    - "ext_jtag"    - external JTAG clock         - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-cru
+      - rockchip,rk3288w-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3288-cru";
+      reg = <0xff760000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/rockchip,rk3308-cru.yaml b/Bindings/clock/rockchip,rk3308-cru.yaml
new file mode 100644
index 0000000..fec37f5
--- /dev/null
+++ b/Bindings/clock/rockchip,rk3308-cru.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3308-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3308 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3308 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"                               - crystal input      - required
+    - "xin32k"                               - rtc clock          - optional
+    - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in",
+      "mclk_i2s2_8ch_in", "mclk_i2s3_8ch_in",
+      "mclk_i2s0_2ch_in", "mclk_i2s1_2ch_in" - external I2S or
+                                               SPDIF clock        - optional
+    - "mac_clkin"                            - external MAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3308-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff500000 {
+      compatible = "rockchip,rk3308-cru";
+      reg = <0xff500000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/rockchip,rk3328-cru.txt b/Bindings/clock/rockchip,rk3328-cru.txt
new file mode 100644
index 0000000..904ae68
--- /dev/null
+++ b/Bindings/clock/rockchip,rk3328-cru.txt
@@ -0,0 +1,58 @@
+* Rockchip RK3328 Clock and Reset Unit
+
+The RK3328 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3328-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3328-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "clkin_i2s" - external I2S clock - optional,
+ - "gmac_clkin" - external GMAC clock - optional
+ - "phy_50m_out" - output clock of the pll in the mac phy
+ - "hdmi_phy" - output clock of the hdmi phy pll - optional
+
+Example: Clock controller node:
+
+	cru: clock-controller@ff440000 {
+		compatible = "rockchip,rk3328-cru";
+		reg = <0x0 0xff440000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@ff120000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0xff120000 0x100>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART0>;
+	};
diff --git a/Bindings/clock/rockchip,rk3368-cru.yaml b/Bindings/clock/rockchip,rk3368-cru.yaml
new file mode 100644
index 0000000..90af242
--- /dev/null
+++ b/Bindings/clock/rockchip,rk3368-cru.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3368-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3368 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3368 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input                          - required
+    - "xin32k"     - rtc clock                              - optional
+    - "ext_i2s"    - external I2S clock                     - optional
+    - "ext_gmac"   - external GMAC clock                    - optional
+    - "ext_hsadc"  - external HSADC clock                   - optional
+    - "ext_isp"    - external ISP clock                     - optional
+    - "ext_jtag"   - external JTAG clock                    - optional
+    - "ext_vip"    - external VIP clock                     - optional
+    - "usbotg_out" - output clock of the pll in the otg phy
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3368-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3368-cru";
+      reg = <0xff760000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/rockchip,rk3399-cru.yaml b/Bindings/clock/rockchip,rk3399-cru.yaml
new file mode 100644
index 0000000..0b758e0
--- /dev/null
+++ b/Bindings/clock/rockchip,rk3399-cru.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3399-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3399 Clock and Reset Unit
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3399 clock controller generates and supplies clock to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3399-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"           - crystal input                          - required,
+    - "xin32k"           - rtc clock                              - optional,
+    - "clkin_gmac"       - external GMAC clock                    - optional,
+    - "clkin_i2s"        - external I2S clock                     - optional,
+    - "pclkin_cif"       - external ISP clock                     - optional,
+    - "clk_usbphy0_480m" - output clock of the pll in the usbphy0
+    - "clk_usbphy1_480m" - output clock of the pll in the usbphy1
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3399-pmucru
+      - rockchip,rk3399-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files". It is used
+      for GRF muxes, if missing any muxes present in the GRF will not be
+      available.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pmucru: clock-controller@ff750000 {
+      compatible = "rockchip,rk3399-pmucru";
+      reg = <0xff750000 0x1000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3399-cru";
+      reg = <0xff760000 0x1000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/rockchip,rk3568-cru.yaml b/Bindings/clock/rockchip,rk3568-cru.yaml
new file mode 100644
index 0000000..f809c28
--- /dev/null
+++ b/Bindings/clock/rockchip,rk3568-cru.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3568-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROCKCHIP rk3568 Family Clock Control Module
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3568 clock controller generates the clock and also implements a
+  reset controller for SoC peripherals.
+  (examples: provide SCLK_UART1\PCLK_UART1 and SRST_P_UART1\SRST_S_UART1 for UART module)
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3568-cru.h headers and can be
+  used in device tree sources.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-cru
+      - rockchip,rk3568-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    pmucru: clock-controller@fdd00000 {
+      compatible = "rockchip,rk3568-pmucru";
+      reg = <0xfdd00000 0x1000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+  - |
+    cru: clock-controller@fdd20000 {
+      compatible = "rockchip,rk3568-cru";
+      reg = <0xfdd20000 0x1000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/rockchip,rk3588-cru.yaml b/Bindings/clock/rockchip,rk3588-cru.yaml
new file mode 100644
index 0000000..74cd3f3
--- /dev/null
+++ b/Bindings/clock/rockchip,rk3588-cru.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3588-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3588 Family Clock and Reset Control Module
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3588 clock controller generates the clock and also implements a reset
+  controller for SoC peripherals. For example it provides SCLK_UART2 and
+  PCLK_UART2, as well as SRST_P_UART2 and SRST_S_UART2 for the second UART
+  module.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clock and reset IDs
+  are defined as preprocessor macros in dt-binding headers.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3588-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: xin24m
+      - const: xin32k
+
+  assigned-clocks: true
+
+  assigned-clock-rates: true
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      phandle to the syscon managing the "general register files". It is used
+      for GRF muxes, if missing any muxes present in the GRF will not be
+      available.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@fd7c0000 {
+      compatible = "rockchip,rk3588-cru";
+      reg = <0xfd7c0000 0x5c000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/rockchip,rv1108-cru.yaml b/Bindings/clock/rockchip,rv1108-cru.yaml
new file mode 100644
index 0000000..4611d92
--- /dev/null
+++ b/Bindings/clock/rockchip,rv1108-cru.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rv1108-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RV1108 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RV1108 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"   - crystal input                              - required
+    - "ext_vip"  - external VIP clock                         - optional
+    - "ext_i2s"  - external I2S clock                         - optional
+    - "ext_gmac" - external GMAC clock                        - optional
+    - "hdmiphy"  - external clock input derived from HDMI PHY - optional
+    - "usbphy"   - external clock input derived from USB PHY  - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rv1108-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20200000 {
+      compatible = "rockchip,rv1108-cru";
+      reg = <0x20200000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/rockchip,rv1126-cru.yaml b/Bindings/clock/rockchip,rv1126-cru.yaml
new file mode 100644
index 0000000..0998f8b
--- /dev/null
+++ b/Bindings/clock/rockchip,rv1126-cru.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rv1126-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RV1126 Clock and Reset Unit
+
+maintainers:
+  - Jagan Teki <jagan@edgeble.ai>
+  - Finley Xiao <finley.xiao@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description:
+  The RV1126 clock controller generates the clock and also implements a
+  reset controller for SoC peripherals.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rv1126-cru
+      - rockchip,rv1126-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff490000 {
+      compatible = "rockchip,rv1126-cru";
+      reg = <0xff490000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/samsung,exynos-audss-clock.yaml b/Bindings/clock/samsung,exynos-audss-clock.yaml
new file mode 100644
index 0000000..d819dfa
--- /dev/null
+++ b/Bindings/clock/samsung,exynos-audss-clock.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos-audss-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Audio SubSystem clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos-audss-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-audss-clock
+      - samsung,exynos5250-audss-clock
+      - samsung,exynos5410-audss-clock
+      - samsung,exynos5420-audss-clock
+
+  clocks:
+    minItems: 2
+    items:
+      - description:
+          Fixed rate PLL reference clock, parent of mout_audss. "fin_pll" is
+          used if not specified.
+      - description:
+          Input PLL to the AudioSS block, parent of mout_audss. "fout_epll" is
+          used if not specified.
+      - description:
+          Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if not
+          specified.
+      - description:
+          PCM clock, parent of sclk_pcm.  "sclk_pcm0" is used if not specified.
+      - description:
+          External i2s clock, parent of mout_i2s. "cdclk0" is used if not
+          specified.
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pll_ref
+      - const: pll_in
+      - const: sclk_audio
+      - const: sclk_pcm_in
+      - const: cdclk
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@3810000 {
+        compatible = "samsung,exynos5250-audss-clock";
+        reg = <0x03810000 0x0c>;
+        #clock-cells = <1>;
+        clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>, <&ext_i2s_clk>;
+        clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk";
+    };
diff --git a/Bindings/clock/samsung,exynos-clock.yaml b/Bindings/clock/samsung,exynos-clock.yaml
new file mode 100644
index 0000000..a36781a
--- /dev/null
+++ b/Bindings/clock/samsung,exynos-clock.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  All available clocks are defined as preprocessor macros in
+  dt-bindings/clock/ headers.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos3250-cmu
+          - samsung,exynos3250-cmu-dmc
+          - samsung,exynos3250-cmu-isp
+          - samsung,exynos4210-clock
+          - samsung,exynos4212-clock
+          - samsung,exynos4412-clock
+          - samsung,exynos5250-clock
+      - items:
+          - enum:
+              - samsung,exynos5420-clock
+              - samsung,exynos5800-clock
+          - const: syscon
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    clock: clock-controller@10010000 {
+        compatible = "samsung,exynos5250-clock";
+        reg = <0x10010000 0x30000>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/samsung,exynos-ext-clock.yaml b/Bindings/clock/samsung,exynos-ext-clock.yaml
new file mode 100644
index 0000000..c98eff6
--- /dev/null
+++ b/Bindings/clock/samsung,exynos-ext-clock.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos-ext-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC external/osc/XXTI/XusbXTI clock
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Samsung SoCs require an external clock supplied through XXTI or XusbXTI pins.
+
+properties:
+  compatible:
+    enum:
+      - samsung,clock-xxti
+      - samsung,clock-xusbxti
+      - samsung,exynos5420-oscclk
+
+  "#clock-cells":
+    const: 0
+
+  clock-frequency: true
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - clock-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    fixed-rate-clocks {
+        clock {
+            compatible = "samsung,clock-xxti";
+            clock-frequency = <24000000>;
+        };
+    };
diff --git a/Bindings/clock/samsung,exynos4412-isp-clock.yaml b/Bindings/clock/samsung,exynos4412-isp-clock.yaml
new file mode 100644
index 0000000..bee1343
--- /dev/null
+++ b/Bindings/clock/samsung,exynos4412-isp-clock.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos4412-isp-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos4412 SoC ISP clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Clock controller for Samsung Exynos4412 SoC FIMC-ISP (Camera ISP)
+  All available clocks are defined as preprocessor macros in
+  dt-bindings/clock/ headers.
+
+properties:
+  compatible:
+    const: samsung,exynos4412-isp-clock
+
+  clocks:
+    items:
+      - description: CLK_ACLK200 from the main clock controller
+      - description: CLK_ACLK400_MCUISP from the main clock controller
+
+  clock-names:
+    items:
+      - const: aclk200
+      - const: aclk400_mcuisp
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - power-domains
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    clock-controller@10048000 {
+        compatible = "samsung,exynos4412-isp-clock";
+        reg = <0x10048000 0x1000>;
+        #clock-cells = <1>;
+        power-domains = <&pd_isp>;
+        clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>;
+        clock-names = "aclk200", "aclk400_mcuisp";
+    };
diff --git a/Bindings/clock/samsung,exynos5260-clock.yaml b/Bindings/clock/samsung,exynos5260-clock.yaml
new file mode 100644
index 0000000..b05f835
--- /dev/null
+++ b/Bindings/clock/samsung,exynos5260-clock.yaml
@@ -0,0 +1,382 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5260-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5260 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+    - "xrtcxti" - input clock from XRTCXTI
+    - "ioclk_pcm_extclk" - pcm external operation clock
+    - "ioclk_spdif_extclk" - spdif external operation clock
+    - "ioclk_i2s_cdclk" - i2s0 codec clock
+
+  Phy clocks::
+  There are several clocks which are generated by specific PHYs.  These clocks
+  are fed into the clock controller and then routed to the hardware blocks.
+  These clocks are defined as fixed clocks in the driver with following names::
+    - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
+    - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
+    - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
+    - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
+    - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
+    - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
+    - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
+    - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
+    - "phyclk_dptx_phy_clk_div2"
+    - "phyclk_mipi_dphy_4l_m_rxclkesc0"
+    - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
+    - "phyclk_usbhost20_phy_freeclk"
+    - "phyclk_usbhost20_phy_clk48mohci"
+    - "phyclk_usbdrd30_udrd30_pipe_pclk"
+    - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5260-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5260-clock-top
+      - samsung,exynos5260-clock-peri
+      - samsung,exynos5260-clock-egl
+      - samsung,exynos5260-clock-kfc
+      - samsung,exynos5260-clock-g2d
+      - samsung,exynos5260-clock-mif
+      - samsung,exynos5260-clock-mfc
+      - samsung,exynos5260-clock-g3d
+      - samsung,exynos5260-clock-fsys
+      - samsung,exynos5260-clock-aud
+      - samsung,exynos5260-clock-isp
+      - samsung,exynos5260-clock-gscl
+      - samsung,exynos5260-clock-disp
+
+  clocks:
+    minItems: 1
+    maxItems: 19
+
+  clock-names:
+    minItems: 1
+    maxItems: 19
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-top
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_mem_pll
+            - const: dout_bus_pll
+            - const: dout_media_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-peri
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: ioclk_pcm_extclk
+            - const: ioclk_i2s_cdclk
+            - const: ioclk_spdif_extclk
+            - const: phyclk_hdmi_phy_ref_cko
+            - const: dout_aclk_peri_66
+            - const: dout_sclk_peri_uart0
+            - const: dout_sclk_peri_uart1
+            - const: dout_sclk_peri_uart2
+            - const: dout_sclk_peri_spi0_b
+            - const: dout_sclk_peri_spi1_b
+            - const: dout_sclk_peri_spi2_b
+            - const: dout_aclk_peri_aud
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-egl
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_bus_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-kfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_media_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-g2d
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_g2d_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-mif
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: fin_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-mfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_mfc_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-g3d
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: fin_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-fsys
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: phyclk_usbhost20_phy_phyclock
+            - const: phyclk_usbhost20_phy_freeclk
+            - const: phyclk_usbhost20_phy_clk48mohci
+            - const: phyclk_usbdrd30_udrd30_pipe_pclk
+            - const: phyclk_usbdrd30_udrd30_phyclock
+            - const: dout_aclk_fsys_200
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-aud
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: fout_aud_pll
+            - const: ioclk_i2s_cdclk
+            - const: ioclk_pcm_extclk
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-isp
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_isp1_266
+            - const: dout_aclk_isp1_400
+            - const: mout_aclk_isp1_266
+
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-gscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_gscl_400
+            - const: dout_aclk_gscl_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-disp
+    then:
+      properties:
+        clocks:
+          minItems: 19
+          maxItems: 19
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: phyclk_dptx_phy_ch3_txd_clk
+            - const: phyclk_dptx_phy_ch2_txd_clk
+            - const: phyclk_dptx_phy_ch1_txd_clk
+            - const: phyclk_dptx_phy_ch0_txd_clk
+            - const: phyclk_hdmi_phy_tmds_clko
+            - const: phyclk_hdmi_phy_ref_clko
+            - const: phyclk_hdmi_phy_pixel_clko
+            - const: phyclk_hdmi_link_o_tmds_clkhi
+            - const: phyclk_mipi_dphy_4l_m_txbyte_clkhs
+            - const: phyclk_dptx_phy_o_ref_clk_24m
+            - const: phyclk_dptx_phy_clk_div2
+            - const: phyclk_mipi_dphy_4l_m_rxclkesc0
+            - const: phyclk_hdmi_phy_ref_cko
+            - const: ioclk_spdif_extclk
+            - const: dout_aclk_peri_aud
+            - const: dout_aclk_disp_222
+            - const: dout_sclk_disp_pixel
+            - const: dout_aclk_disp_333
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5260-clk.h>
+
+    fin_pll: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@10010000 {
+        compatible = "samsung,exynos5260-clock-top";
+        reg = <0x10010000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>,
+                 <&clock_mif MIF_DOUT_MEM_PLL>,
+                 <&clock_mif MIF_DOUT_BUS_PLL>,
+                 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+        clock-names = "fin_pll",
+                      "dout_mem_pll",
+                      "dout_bus_pll",
+                      "dout_media_pll";
+    };
diff --git a/Bindings/clock/samsung,exynos5410-clock.yaml b/Bindings/clock/samsung,exynos5410-clock.yaml
new file mode 100644
index 0000000..b737c9d
--- /dev/null
+++ b/Bindings/clock/samsung,exynos5410-clock.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5410-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5410 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5410.h header.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5410-clock
+
+  clocks:
+    description:
+      Should contain an entry specifying the root clock from external
+      oscillator supplied through XXTI or XusbXTI pin.  This clock should be
+      defined using standard clock bindings with "fin_pll" clock-output-name.
+      That clock is being passed internally to the 9 PLLs.
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5410.h>
+
+    fin_pll: osc-clock {
+        compatible = "fixed-clock";
+        clock-frequency = <24000000>;
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+    };
+
+    clock-controller@10010000 {
+        compatible = "samsung,exynos5410-clock";
+        reg = <0x10010000 0x30000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>;
+    };
diff --git a/Bindings/clock/samsung,exynos5433-clock.yaml b/Bindings/clock/samsung,exynos5433-clock.yaml
new file mode 100644
index 0000000..3f9326e
--- /dev/null
+++ b/Bindings/clock/samsung,exynos5433-clock.yaml
@@ -0,0 +1,524 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5433-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "oscclk" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5433.h header.
+
+properties:
+  compatible:
+    enum:
+        # CMU_TOP which generates clocks for
+        # IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS domains and bus
+        # clocks
+      - samsung,exynos5433-cmu-top
+        # CMU_CPIF which generates clocks for LLI (Low Latency Interface) IP
+      - samsung,exynos5433-cmu-cpif
+        # CMU_MIF which generates clocks for DRAM Memory Controller domain
+      - samsung,exynos5433-cmu-mif
+        # CMU_PERIC which generates clocks for
+        # UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs
+      - samsung,exynos5433-cmu-peric
+        # CMU_PERIS which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs
+      - samsung,exynos5433-cmu-peris
+        # CMU_FSYS which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs
+      - samsung,exynos5433-cmu-fsys
+      - samsung,exynos5433-cmu-g2d
+        # CMU_DISP which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs
+      - samsung,exynos5433-cmu-disp
+      - samsung,exynos5433-cmu-aud
+      - samsung,exynos5433-cmu-bus0
+      - samsung,exynos5433-cmu-bus1
+      - samsung,exynos5433-cmu-bus2
+      - samsung,exynos5433-cmu-g3d
+      - samsung,exynos5433-cmu-gscl
+      - samsung,exynos5433-cmu-apollo
+        # CMU_ATLAS which generates clocks for Cortex-A57 Quad-core processor,
+        # CoreSight and  L2 cache controller
+      - samsung,exynos5433-cmu-atlas
+        # CMU_MSCL which generates clocks for M2M (Memory to Memory) scaler and
+        # JPEG IPs
+      - samsung,exynos5433-cmu-mscl
+      - samsung,exynos5433-cmu-mfc
+      - samsung,exynos5433-cmu-hevc
+        # CMU_ISP which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs
+      - samsung,exynos5433-cmu-isp
+        # CMU_CAM0 which generates clocks for
+        # MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs
+      - samsung,exynos5433-cmu-cam0
+        # CMU_CAM1 which generates clocks for
+        # Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs
+      - samsung,exynos5433-cmu-cam1
+        # CMU_IMEM which generates clocks for SSS (Security SubSystem) and
+        # SlimSSS IPs
+      - samsung,exynos5433-cmu-imem
+
+  clocks:
+    minItems: 1
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-top
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_mphy_pll
+            - const: sclk_mfc_pll
+            - const: sclk_bus_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cpif
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: oscclk
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mif
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_mphy_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-fsys
+    then:
+      properties:
+        clocks:
+          minItems: 10
+          maxItems: 10
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_ufs_mphy
+            - const: aclk_fsys_200
+            - const: sclk_pcie_100_fsys
+            - const: sclk_ufsunipro_fsys
+            - const: sclk_mmc2_fsys
+            - const: sclk_mmc1_fsys
+            - const: sclk_mmc0_fsys
+            - const: sclk_usbhost30_fsys
+            - const: sclk_usbdrd30_fsys
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-g2d
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_g2d_266
+            - const: aclk_g2d_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-disp
+    then:
+      properties:
+        clocks:
+          minItems: 9
+          maxItems: 9
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_dsim1_disp
+            - const: sclk_dsim0_disp
+            - const: sclk_dsd_disp
+            - const: sclk_decon_tv_eclk_disp
+            - const: sclk_decon_vclk_disp
+            - const: sclk_decon_eclk_disp
+            - const: sclk_decon_tv_vclk_disp
+            - const: aclk_disp_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-aud
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: fout_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus0
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: aclk_bus0_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus1
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: aclk_bus1_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus2
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_bus2_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-g3d
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_g3d_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-gscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_gscl_111
+            - const: aclk_gscl_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-apollo
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_bus_pll_apollo
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-atlas
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_bus_pll_atlas
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_jpeg_mscl
+            - const: aclk_mscl_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_mfc_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-hevc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_hevc_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-isp
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_isp_dis_400
+            - const: aclk_isp_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cam0
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_cam0_333
+            - const: aclk_cam0_400
+            - const: aclk_cam0_552
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cam1
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_isp_uart_cam1
+            - const: sclk_isp_spi1_cam1
+            - const: sclk_isp_spi0_cam1
+            - const: aclk_cam1_333
+            - const: aclk_cam1_400
+            - const: aclk_cam1_552
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-imem
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_imem_sssx_266
+            - const: aclk_imem_266
+            - const: aclk_imem_200
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    xxti: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "oscclk";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@10030000 {
+        compatible = "samsung,exynos5433-cmu-top";
+        reg = <0x10030000 0x1000>;
+        #clock-cells = <1>;
+
+        clock-names = "oscclk",
+                      "sclk_mphy_pll",
+                      "sclk_mfc_pll",
+                      "sclk_bus_pll";
+        clocks = <&xxti>,
+                 <&cmu_cpif CLK_SCLK_MPHY_PLL>,
+                 <&cmu_mif CLK_SCLK_MFC_PLL>,
+                 <&cmu_mif CLK_SCLK_BUS_PLL>;
+    };
diff --git a/Bindings/clock/samsung,exynos7-clock.yaml b/Bindings/clock/samsung,exynos7-clock.yaml
new file mode 100644
index 0000000..c137c67
--- /dev/null
+++ b/Bindings/clock/samsung,exynos7-clock.yaml
@@ -0,0 +1,272 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos7-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos7-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7-clock-topc
+      - samsung,exynos7-clock-top0
+      - samsung,exynos7-clock-top1
+      - samsung,exynos7-clock-ccore
+      - samsung,exynos7-clock-peric0
+      - samsung,exynos7-clock-peric1
+      - samsung,exynos7-clock-peris
+      - samsung,exynos7-clock-fsys0
+      - samsung,exynos7-clock-fsys1
+      - samsung,exynos7-clock-mscl
+      - samsung,exynos7-clock-aud
+
+  clocks:
+    minItems: 1
+    maxItems: 13
+
+  clock-names:
+    minItems: 1
+    maxItems: 13
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-top0
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_sclk_bus0_pll
+            - const: dout_sclk_bus1_pll
+            - const: dout_sclk_cc_pll
+            - const: dout_sclk_mfc_pll
+            - const: dout_sclk_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-top1
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_sclk_bus0_pll
+            - const: dout_sclk_bus1_pll
+            - const: dout_sclk_cc_pll
+            - const: dout_sclk_mfc_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-ccore
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_ccore_133
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peric0
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peric0_66
+            - const: sclk_uart0
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peric1
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peric1_66
+            - const: sclk_uart1
+            - const: sclk_uart2
+            - const: sclk_uart3
+            - const: sclk_spi0
+            - const: sclk_spi1
+            - const: sclk_spi2
+            - const: sclk_spi3
+            - const: sclk_spi4
+            - const: sclk_i2s1
+            - const: sclk_pcm1
+            - const: sclk_spdif
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peris
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peris_66
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-fsys0
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_fsys0_200
+            - const: dout_sclk_mmc2
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-fsys1
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_fsys1_200
+            - const: dout_sclk_mmc0
+            - const: dout_sclk_mmc1
+            - const: dout_sclk_ufsunipro20
+            - const: dout_sclk_phy_fsys1
+            - const: dout_sclk_phy_fsys1_26m
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-aud
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: fout_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos7-clk.h>
+
+    fin_pll: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@105e0000 {
+        compatible = "samsung,exynos7-clock-top1";
+        reg = <0x105e0000 0xb000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>,
+                 <&clock_topc DOUT_SCLK_BUS0_PLL>,
+                 <&clock_topc DOUT_SCLK_BUS1_PLL>,
+                 <&clock_topc DOUT_SCLK_CC_PLL>,
+                 <&clock_topc DOUT_SCLK_MFC_PLL>;
+        clock-names = "fin_pll",
+                      "dout_sclk_bus0_pll",
+                      "dout_sclk_bus1_pll",
+                      "dout_sclk_cc_pll",
+                      "dout_sclk_mfc_pll";
+    };
diff --git a/Bindings/clock/samsung,exynos7885-clock.yaml b/Bindings/clock/samsung,exynos7885-clock.yaml
new file mode 100644
index 0000000..006d33a
--- /dev/null
+++ b/Bindings/clock/samsung,exynos7885-clock.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos7885-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7885 SoC clock controller
+
+maintainers:
+  - Dávid Virág <virag.david003@gmail.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos7885 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. The root clock in that root tree
+  is an external clock: OSCCLK (26 MHz). This external clock must be defined
+  as a fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/exynos7885.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7885-cmu-top
+      - samsung,exynos7885-cmu-core
+      - samsung,exynos7885-cmu-fsys
+      - samsung,exynos7885-cmu-peri
+
+  clocks:
+    minItems: 1
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+            - description: CCI clock (from CMU_TOP)
+            - description: G3D clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_core_bus
+            - const: dout_core_cci
+            - const: dout_core_g3d
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-fsys
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS bus clock (from CMU_TOP)
+            - description: MMC_CARD clock (from CMU_TOP)
+            - description: MMC_EMBD clock (from CMU_TOP)
+            - description: MMC_SDIO clock (from CMU_TOP)
+            - description: USB30DRD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_fsys_bus
+            - const: dout_fsys_mmc_card
+            - const: dout_fsys_mmc_embd
+            - const: dout_fsys_mmc_sdio
+            - const: dout_fsys_usb30drd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-peri
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERI bus clock (from CMU_TOP)
+            - description: SPI0 clock (from CMU_TOP)
+            - description: SPI1 clock (from CMU_TOP)
+            - description: UART0 clock (from CMU_TOP)
+            - description: UART1 clock (from CMU_TOP)
+            - description: UART2 clock (from CMU_TOP)
+            - description: USI0 clock (from CMU_TOP)
+            - description: USI1 clock (from CMU_TOP)
+            - description: USI2 clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_peri_bus
+            - const: dout_peri_spi0
+            - const: dout_peri_spi1
+            - const: dout_peri_uart0
+            - const: dout_peri_uart1
+            - const: dout_peri_uart2
+            - const: dout_peri_usi0
+            - const: dout_peri_usi1
+            - const: dout_peri_usi2
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_PERI
+  - |
+    #include <dt-bindings/clock/exynos7885.h>
+
+    cmu_peri: clock-controller@10010000 {
+        compatible = "samsung,exynos7885-cmu-peri";
+        reg = <0x10010000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&oscclk>,
+                 <&cmu_top CLK_DOUT_PERI_BUS>,
+                 <&cmu_top CLK_DOUT_PERI_SPI0>,
+                 <&cmu_top CLK_DOUT_PERI_SPI1>,
+                 <&cmu_top CLK_DOUT_PERI_UART0>,
+                 <&cmu_top CLK_DOUT_PERI_UART1>,
+                 <&cmu_top CLK_DOUT_PERI_UART2>,
+                 <&cmu_top CLK_DOUT_PERI_USI0>,
+                 <&cmu_top CLK_DOUT_PERI_USI1>,
+                 <&cmu_top CLK_DOUT_PERI_USI2>;
+        clock-names = "oscclk",
+                      "dout_peri_bus",
+                      "dout_peri_spi0",
+                      "dout_peri_spi1",
+                      "dout_peri_uart0",
+                      "dout_peri_uart1",
+                      "dout_peri_uart2",
+                      "dout_peri_usi0",
+                      "dout_peri_usi1",
+                      "dout_peri_usi2";
+    };
+
+...
diff --git a/Bindings/clock/samsung,exynos850-clock.yaml b/Bindings/clock/samsung,exynos850-clock.yaml
new file mode 100644
index 0000000..c752c89
--- /dev/null
+++ b/Bindings/clock/samsung,exynos850-clock.yaml
@@ -0,0 +1,311 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos850-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos850 SoC clock controller
+
+maintainers:
+  - Sam Protsenko <semen.protsenko@linaro.org>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos850 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. Root clocks in that clock tree are
+  two external clocks:: OSCCLK (26 MHz) and RTCCLK (32768 Hz). Those external
+  clocks must be defined as fixed-rate clocks in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/exynos850.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos850-cmu-top
+      - samsung,exynos850-cmu-apm
+      - samsung,exynos850-cmu-aud
+      - samsung,exynos850-cmu-cmgp
+      - samsung,exynos850-cmu-core
+      - samsung,exynos850-cmu-dpu
+      - samsung,exynos850-cmu-g3d
+      - samsung,exynos850-cmu-hsi
+      - samsung,exynos850-cmu-is
+      - samsung,exynos850-cmu-mfcmscl
+      - samsung,exynos850-cmu-peri
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-apm
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_APM bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_apm_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-aud
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: AUD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_aud
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-cmgp
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CMGP bus clock (from CMU_APM)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: gout_clkcmu_cmgp_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+            - description: CCI clock (from CMU_TOP)
+            - description: eMMC clock (from CMU_TOP)
+            - description: SSS clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_core_bus
+            - const: dout_core_cci
+            - const: dout_core_mmc_embd
+            - const: dout_core_sss
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-dpu
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: DPU clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_dpu
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-g3d
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: G3D clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_g3d_switch
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-hsi
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: External RTC clock (32768 Hz)
+            - description: CMU_HSI bus clock (from CMU_TOP)
+            - description: SD card clock (from CMU_TOP)
+            - description: USB 2.0 DRD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: rtcclk
+            - const: dout_hsi_bus
+            - const: dout_hsi_mmc_card
+            - const: dout_hsi_usb20drd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-is
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_IS bus clock (from CMU_TOP)
+            - description: Image Texture Processing core clock (from CMU_TOP)
+            - description: Visual Recognition Accelerator clock (from CMU_TOP)
+            - description: Geometric Distortion Correction clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_is_bus
+            - const: dout_is_itp
+            - const: dout_is_vra
+            - const: dout_is_gdc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-mfcmscl
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: Multi-Format Codec clock (from CMU_TOP)
+            - description: Memory to Memory Scaler clock (from CMU_TOP)
+            - description: Multi-Channel Scaler clock (from CMU_TOP)
+            - description: JPEG codec clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_mfcmscl_mfc
+            - const: dout_mfcmscl_m2m
+            - const: dout_mfcmscl_mcsc
+            - const: dout_mfcmscl_jpeg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-peri
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERI bus clock (from CMU_TOP)
+            - description: UART clock (from CMU_TOP)
+            - description: Parent clock for HSI2C and SPI (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_peri_bus
+            - const: dout_peri_uart
+            - const: dout_peri_ip
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_PERI
+  - |
+    #include <dt-bindings/clock/exynos850.h>
+
+    cmu_peri: clock-controller@10030000 {
+        compatible = "samsung,exynos850-cmu-peri";
+        reg = <0x10030000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&oscclk>, <&cmu_top CLK_DOUT_PERI_BUS>,
+                 <&cmu_top CLK_DOUT_PERI_UART>,
+                 <&cmu_top CLK_DOUT_PERI_IP>;
+        clock-names = "oscclk", "dout_peri_bus",
+                      "dout_peri_uart", "dout_peri_ip";
+    };
+
+...
diff --git a/Bindings/clock/samsung,exynosautov9-clock.yaml b/Bindings/clock/samsung,exynosautov9-clock.yaml
new file mode 100644
index 0000000..55c4f94
--- /dev/null
+++ b/Bindings/clock/samsung,exynosautov9-clock.yaml
@@ -0,0 +1,263 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynosautov9-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Auto v9 SoC clock controller
+
+maintainers:
+  - Chanho Park <chanho61.park@samsung.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos Auto v9 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. Root clocks in that clock tree are
+  two external clocks:: OSCCLK/XTCXO (26 MHz) and RTCCLK/XrtcXTI (32768 Hz).
+  The external OSCCLK must be defined as fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other clocks of function blocks (other CMUs) are usually
+  derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'include/dt-bindings/clock/samsung,exynosautov9.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynosautov9-cmu-top
+      - samsung,exynosautov9-cmu-busmc
+      - samsung,exynosautov9-cmu-core
+      - samsung,exynosautov9-cmu-fsys0
+      - samsung,exynosautov9-cmu-fsys1
+      - samsung,exynosautov9-cmu-fsys2
+      - samsung,exynosautov9-cmu-peric0
+      - samsung,exynosautov9-cmu-peric1
+      - samsung,exynosautov9-cmu-peris
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-busmc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_BUSMC bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_busmc_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_core_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS0 bus clock (from CMU_TOP)
+            - description: CMU_FSYS0 pcie clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys0_bus
+            - const: dout_clkcmu_fsys0_pcie
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS1 bus clock (from CMU_TOP)
+            - description: CMU_FSYS1 mmc card clock (from CMU_TOP)
+            - description: CMU_FSYS1 usb clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys1_bus
+            - const: gout_clkcmu_fsys1_mmc_card
+            - const: dout_clkcmu_fsys1_usbdrd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys2
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS2 bus clock (from CMU_TOP)
+            - description: UFS clock (from CMU_TOP)
+            - description: Ethernet clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys2_bus
+            - const: dout_fsys2_clkcmu_ufs_embd
+            - const: dout_fsys2_clkcmu_ethernet
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peric0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIC0 bus clock (from CMU_TOP)
+            - description: PERIC0 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peric0_bus
+            - const: dout_clkcmu_peric0_ip
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peric1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIC1 bus clock (from CMU_TOP)
+            - description: PERIC1 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peric1_bus
+            - const: dout_clkcmu_peric1_ip
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peris
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIS bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peris_bus
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_FSYS2
+  - |
+    #include <dt-bindings/clock/samsung,exynosautov9.h>
+
+    cmu_fsys2: clock-controller@17c00000 {
+        compatible = "samsung,exynosautov9-cmu-fsys2";
+        reg = <0x17c00000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&xtcxo>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_BUS>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>;
+        clock-names = "oscclk",
+                      "dout_clkcmu_fsys2_bus",
+                      "dout_fsys2_clkcmu_ufs_embd",
+                      "dout_fsys2_clkcmu_ethernet";
+    };
+
+...
diff --git a/Bindings/clock/samsung,s2mps11.yaml b/Bindings/clock/samsung,s2mps11.yaml
new file mode 100644
index 0000000..d5296e6
--- /dev/null
+++ b/Bindings/clock/samsung,s2mps11.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s2mps11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2M and S5M family clock generator block
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz
+  outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs.
+
+  All available clocks are defined as preprocessor macros in
+  dt-bindings/clock/samsung,s2mps11.h header.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s2mps11-clk
+      - samsung,s2mps13-clk # S2MPS13 and S2MPS15
+      - samsung,s2mps14-clk
+      - samsung,s5m8767-clk
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    maxItems: 3
+    description: Names for AP, CP and BT clocks.
+
+required:
+  - compatible
+  - "#clock-cells"
+
+additionalProperties: false
diff --git a/Bindings/clock/samsung,s3c64xx-clock.txt b/Bindings/clock/samsung,s3c64xx-clock.txt
new file mode 100644
index 0000000..872ee8e
--- /dev/null
+++ b/Bindings/clock/samsung,s3c64xx-clock.txt
@@ -0,0 +1,76 @@
+* Samsung S3C64xx Clock Controller
+
+The S3C64xx clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to all SoCs in
+the S3C64xx family.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,s3c6400-clock" - controller compatible with S3C6400 SoC.
+  - "samsung,s3c6410-clock" - controller compatible with S3C6410 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular S3C64xx SoC and this is specified where applicable.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/samsung,s3c64xx-clock.h header and can be used in device
+tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "fin_pll" - PLL input clock (xtal/extclk) - required,
+ - "xusbxti" - USB xtal - required,
+ - "iiscdclk0" - I2S0 codec clock - optional,
+ - "iiscdclk1" - I2S1 codec clock - optional,
+ - "iiscdclk2" - I2S2 codec clock - optional,
+ - "pcmcdclk0" - PCM0 codec clock - optional,
+ - "pcmcdclk1" - PCM1 codec clock - optional, only S3C6410.
+
+Example: Clock controller node:
+
+	clock: clock-controller@7e00f000 {
+		compatible = "samsung,s3c6410-clock";
+		reg = <0x7e00f000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+Example: Required external clocks:
+
+	fin_pll: clock-fin-pll {
+		compatible = "fixed-clock";
+		clock-output-names = "fin_pll";
+		clock-frequency = <12000000>;
+		#clock-cells = <0>;
+	};
+
+	xusbxti: clock-xusbxti {
+		compatible = "fixed-clock";
+		clock-output-names = "xusbxti";
+		clock-frequency = <48000000>;
+		#clock-cells = <0>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+		uart0: serial@7f005000 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <5>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clock PCLK_UART0>, <&clocks PCLK_UART0>,
+					<&clock SCLK_UART>;
+		};
diff --git a/Bindings/clock/samsung,s5pv210-audss-clock.yaml b/Bindings/clock/samsung,s5pv210-audss-clock.yaml
new file mode 100644
index 0000000..2659854
--- /dev/null
+++ b/Bindings/clock/samsung,s5pv210-audss-clock.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s5pv210-audss-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5Pv210 SoC Audio SubSystem clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/s5pv210-audss.h header.
+
+properties:
+  compatible:
+    const: samsung,s5pv210-audss-clock
+
+  clocks:
+    minItems: 4
+    items:
+      - description:
+          AHB bus clock of the Audio Subsystem.
+      - description:
+          Optional fixed rate PLL reference clock, parent of mout_audss. If not
+          specified (i.e. xusbxti is used for PLL reference), it is fixed to a
+          clock named "xxti".
+      - description:
+          Input PLL to the AudioSS block, parent of mout_audss.
+      - description:
+          Audio bus clock, parent of mout_i2s.
+      - description:
+          Optional external i2s clock, parent of mout_i2s. If not specified, it
+          is fixed to a clock named "iiscdclk0".
+
+  clock-names:
+    minItems: 4
+    items:
+      - const: hclk
+      - const: xxti
+      - const: fout_epll
+      - const: sclk_audio0
+      - const: iiscdclk0
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/s5pv210.h>
+
+    clock-controller@c0900000 {
+        compatible = "samsung,s5pv210-audss-clock";
+        reg = <0xc0900000 0x1000>;
+        #clock-cells = <1>;
+        clock-names = "hclk", "xxti", "fout_epll", "sclk_audio0";
+        clocks = <&clocks DOUT_HCLKP>, <&xxti>, <&clocks FOUT_EPLL>,
+                 <&clocks SCLK_AUDIO0>;
+    };
diff --git a/Bindings/clock/samsung,s5pv210-clock.yaml b/Bindings/clock/samsung,s5pv210-clock.yaml
new file mode 100644
index 0000000..67a3366
--- /dev/null
+++ b/Bindings/clock/samsung,s5pv210-clock.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s5pv210-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P6442/S5PC110/S5PV210 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "xxti" - external crystal oscillator connected to XXTI and XXTO pins of
+      the SoC,
+    - "xusbxti" - external crystal oscillator connected to XUSBXTI and XUSBXTO
+      pins of the SoC,
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/s5pv210.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-clock
+      - samsung,s5p6442-clock
+
+  clocks:
+    items:
+      - description: xxti clock
+      - description: xusbxti clock
+
+  clock-names:
+    items:
+      - const: xxti
+      - const: xusbxti
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/s5pv210.h>
+
+    xxti: clock-0 {
+        compatible = "fixed-clock";
+        clock-frequency = <0>;
+        clock-output-names = "xxti";
+        #clock-cells = <0>;
+    };
+
+    xusbxti: clock-1 {
+        compatible = "fixed-clock";
+        clock-frequency = <0>;
+        clock-output-names = "xusbxti";
+        #clock-cells = <0>;
+    };
+
+    clock-controller@e0100000 {
+        compatible = "samsung,s5pv210-clock";
+        reg = <0xe0100000 0x10000>;
+        clock-names = "xxti", "xusbxti";
+        clocks = <&xxti>, <&xusbxti>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/sifive/fu540-prci.yaml b/Bindings/clock/sifive/fu540-prci.yaml
new file mode 100644
index 0000000..c79e752
--- /dev/null
+++ b/Bindings/clock/sifive/fu540-prci.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sifive/fu540-prci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive FU540 Power Reset Clock Interrupt Controller (PRCI)
+
+maintainers:
+  - Paul Walmsley  <paul.walmsley@sifive.com>
+
+description:
+  On the FU540 family of SoCs, most system-wide clock and reset integration
+  is via the PRCI IP block.
+  The clock consumer should specify the desired clock via the clock ID
+  macros defined in include/dt-bindings/clock/sifive-fu540-prci.h.
+  These macros begin with PRCI_CLK_.
+
+  The hfclk and rtcclk nodes are required, and represent physical
+  crystals or resonators located on the PCB.  These nodes should be present
+  underneath /, rather than /soc.
+
+properties:
+  compatible:
+    const: sifive,fu540-c000-prci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: high frequency clock.
+      - description: RTL clock.
+
+  clock-names:
+    items:
+      - const: hfclk
+      - const: rtcclk
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    prci: clock-controller@10000000 {
+      compatible = "sifive,fu540-c000-prci";
+      reg = <0x10000000 0x1000>;
+      clocks = <&hfclk>, <&rtcclk>;
+      #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/sifive/fu740-prci.yaml b/Bindings/clock/sifive/fu740-prci.yaml
new file mode 100644
index 0000000..252085a
--- /dev/null
+++ b/Bindings/clock/sifive/fu740-prci.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sifive/fu740-prci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive FU740 Power Reset Clock Interrupt Controller (PRCI)
+
+maintainers:
+  - Zong Li <zong.li@sifive.com>
+  - Paul Walmsley  <paul.walmsley@sifive.com>
+
+description:
+  On the FU740 family of SoCs, most system-wide clock and reset integration
+  is via the PRCI IP block.
+  The clock consumer should specify the desired clock via the clock ID
+  macros defined in include/dt-bindings/clock/sifive-fu740-prci.h.
+  These macros begin with PRCI_CLK_.
+
+  The hfclk and rtcclk nodes are required, and represent physical
+  crystals or resonators located on the PCB.  These nodes should be present
+  underneath /, rather than /soc.
+
+properties:
+  compatible:
+    const: sifive,fu740-c000-prci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: high frequency clock.
+      - description: RTL clock.
+
+  clock-names:
+    items:
+      - const: hfclk
+      - const: rtcclk
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    prci: clock-controller@10000000 {
+      compatible = "sifive,fu740-c000-prci";
+      reg = <0x10000000 0x1000>;
+      clocks = <&hfclk>, <&rtcclk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/silabs,si514.txt b/Bindings/clock/silabs,si514.txt
new file mode 100644
index 0000000..a4f28ec
--- /dev/null
+++ b/Bindings/clock/silabs,si514.txt
@@ -0,0 +1,24 @@
+Binding for Silicon Labs 514 programmable I2C clock generator.
+
+Reference
+This binding uses the common clock binding[1]. Details about the device can be
+found in the datasheet[2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Si514 datasheet
+    https://www.silabs.com/Support%20Documents/TechnicalDocs/si514.pdf
+
+Required properties:
+ - compatible: Shall be "silabs,si514"
+ - reg: I2C device address.
+ - #clock-cells: From common clock bindings: Shall be 0.
+
+Optional properties:
+ - clock-output-names: From common clock bindings. Recommended to be "si514".
+
+Example:
+	si514: clock-generator@55 {
+		reg = <0x55>;
+		#clock-cells = <0>;
+		compatible = "silabs,si514";
+	};
diff --git a/Bindings/clock/silabs,si5341.txt b/Bindings/clock/silabs,si5341.txt
new file mode 100644
index 0000000..ce55aba
--- /dev/null
+++ b/Bindings/clock/silabs,si5341.txt
@@ -0,0 +1,175 @@
+Binding for Silicon Labs Si5340, Si5341 Si5342, Si5344 and Si5345 programmable
+i2c clock generator.
+
+Reference
+[1] Si5341 Data Sheet
+    https://www.silabs.com/documents/public/data-sheets/Si5341-40-D-DataSheet.pdf
+[2] Si5341 Reference Manual
+    https://www.silabs.com/documents/public/reference-manuals/Si5341-40-D-RM.pdf
+[3] Si5345 Reference Manual
+    https://www.silabs.com/documents/public/reference-manuals/Si5345-44-42-D-RM.pdf
+
+The Si5341 and Si5340 are programmable i2c clock generators with up to 10 output
+clocks. The chip contains a PLL that sources 5 (or 4) multisynth clocks, which
+in turn can be directed to any of the 10 (or 4) outputs through a divider.
+The internal structure of the clock generators can be found in [2].
+The Si5345 is similar to the Si5341 with the addition of fractional input
+dividers and automatic input selection, as described in [3].
+The Si5342 and Si5344 are smaller versions of the Si5345, with 2 or 4 outputs.
+
+The driver can be used in "as is" mode, reading the current settings from the
+chip at boot, in case you have a (pre-)programmed device. If the PLL is not
+configured when the driver probes, it assumes the driver must fully initialize
+it.
+
+The device type, speed grade and revision are determined runtime by probing.
+
+The driver currently does not support any fancy input configurations. They can
+still be programmed into the chip and the driver will leave them "as is".
+
+==I2C device node==
+
+Required properties:
+- compatible: shall be one of the following:
+	"silabs,si5340" - Si5340 A/B/C/D
+	"silabs,si5341" - Si5341 A/B/C/D
+	"silabs,si5342" - Si5342 A/B/C/D
+	"silabs,si5344" - Si5344 A/B/C/D
+	"silabs,si5345" - Si5345 A/B/C/D
+- reg: i2c device address, usually 0x74
+- #clock-cells: from common clock binding; shall be set to 2.
+	The first value is "0" for outputs, "1" for synthesizers.
+	The second value is the output or synthesizer index.
+- clocks: from common clock binding; list of parent clock  handles,
+	corresponding to inputs. Use a fixed clock for the "xtal" input.
+	At least one must be present.
+- clock-names: One of: "xtal", "in0", "in1", "in2"
+
+Optional properties:
+- vdd-supply: Regulator node for VDD
+- vdda-supply: Regulator node for VDDA
+- vdds-supply: Regulator node for VDDS
+- silabs,pll-m-num, silabs,pll-m-den: Numerator and denominator for PLL
+  feedback divider. Must be such that the PLL output is in the valid range. For
+  example, to create 14GHz from a 48MHz xtal, use m-num=14000 and m-den=48. Only
+  the fraction matters, using 3500 and 12 will deliver the exact same result.
+  If these are not specified, and the PLL is not yet programmed when the driver
+  probes, the PLL will be set to 14GHz.
+- silabs,reprogram: When present, the driver will always assume the device must
+  be initialized, and always performs the soft-reset routine. Since this will
+  temporarily stop all output clocks, don't do this if the chip is generating
+  the CPU clock for example.
+- silabs,xaxb-ext-clk: When present, indicates that the XA/XB pins are used
+  in EXTCLK (external reference clock) rather than XTAL (crystal) mode.
+- interrupts: Interrupt for INTRb pin.
+- silabs,iovdd-33: When present, indicates that the I2C lines are using 3.3V
+  rather than 1.8V thresholds.
+- vddoX-supply (where X is an output index): Regulator node for VDDO for the
+  specified output. The driver selects the output VDD_SEL setting based on this
+  voltage.
+- #address-cells: shall be set to 1.
+- #size-cells: shall be set to 0.
+
+
+== Child nodes: Outputs ==
+
+The child nodes list the output clocks.
+
+Each of the clock outputs can be overwritten individually by using a child node.
+If a child node for a clock output is not set, the configuration remains
+unchanged.
+
+Required child node properties:
+- reg: number of clock output.
+
+Optional child node properties:
+- silabs,format: Output format, one of:
+	1 = differential (defaults to LVDS levels)
+	2 = low-power (defaults to HCSL levels)
+	4 = LVCMOS
+- silabs,common-mode: Manually override output common mode, see [2] for values
+- silabs,amplitude: Manually override output amplitude, see [2] for values
+- silabs,synth-master: boolean. If present, this output is allowed to change the
+	multisynth frequency dynamically.
+- silabs,silabs,disable-high: boolean. If set, the clock output is driven HIGH
+	when disabled, otherwise it's driven LOW.
+
+==Example==
+
+/* 48MHz reference crystal */
+ref48: ref48M {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <48000000>;
+};
+
+i2c-master-node {
+	/* Programmable clock (for logic) */
+	si5341: clock-generator@74 {
+		reg = <0x74>;
+		compatible = "silabs,si5341";
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&ref48>;
+		clock-names = "xtal";
+
+		silabs,pll-m-num = <14000>; /* PLL at 14.0 GHz */
+		silabs,pll-m-den = <48>;
+		silabs,reprogram; /* Chips are not programmed, always reset */
+
+		out@0 {
+			reg = <0>;
+			silabs,format = <1>; /* LVDS 3v3 */
+			silabs,common-mode = <3>;
+			silabs,amplitude = <3>;
+			silabs,synth-master;
+		};
+
+		/*
+		 * Output 6 configuration:
+		 *  LVDS 1v8
+		 */
+		out@6 {
+			reg = <6>;
+			silabs,format = <1>; /* LVDS 1v8 */
+			silabs,common-mode = <13>;
+			silabs,amplitude = <3>;
+		};
+
+		/*
+		 * Output 8 configuration:
+		 *  HCSL 3v3
+		 */
+		out@8 {
+			reg = <8>;
+			silabs,format = <2>;
+			silabs,common-mode = <11>;
+			silabs,amplitude = <3>;
+		};
+	};
+};
+
+some-video-node {
+	/* Standard clock bindings */
+	clock-names = "pixel";
+	clocks = <&si5341 0 7>; /* Output 7 */
+
+	/* Set output 7 to use syntesizer 3 as its parent */
+	assigned-clocks = <&si5341 0 7>, <&si5341 1 3>;
+	assigned-clock-parents = <&si5341 1 3>;
+	/* Set output 7 to 148.5 MHz using a synth frequency of 594 MHz */
+	assigned-clock-rates = <148500000>, <594000000>;
+};
+
+some-audio-node {
+	clock-names = "i2s-clk";
+	clocks = <&si5341 0 0>;
+	/*
+	 * since output 0 is a synth-master, the synth will be automatically set
+	 * to an appropriate frequency when the audio driver requests another
+	 * frequency. We give control over synth 2 to this output here.
+	 */
+	assigned-clocks = <&si5341 0 0>;
+	assigned-clock-parents = <&si5341 1 2>;
+};
diff --git a/Bindings/clock/silabs,si5351.txt b/Bindings/clock/silabs,si5351.txt
new file mode 100644
index 0000000..bfda6af
--- /dev/null
+++ b/Bindings/clock/silabs,si5351.txt
@@ -0,0 +1,126 @@
+Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
+
+Reference
+[1] Si5351A/B/C Data Sheet
+    https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
+
+The Si5351a/b/c are programmable i2c clock generators with up to 8 output
+clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
+3 output clocks are accessible. The internal structure of the clock
+generators can be found in [1].
+
+==I2C device node==
+
+Required properties:
+- compatible: shall be one of the following:
+	"silabs,si5351a" - Si5351a, QFN20 package
+	"silabs,si5351a-msop" - Si5351a, MSOP10 package
+	"silabs,si5351b" - Si5351b, QFN20 package
+	"silabs,si5351c" - Si5351c, QFN20 package
+- reg: i2c device address, shall be 0x60 or 0x61.
+- #clock-cells: from common clock binding; shall be set to 1.
+- clocks: from common clock binding; list of parent clock
+  handles, shall be xtal reference clock or xtal and clkin for
+  si5351c only. Corresponding clock input names are "xtal" and
+  "clkin" respectively.
+- #address-cells: shall be set to 1.
+- #size-cells: shall be set to 0.
+
+Optional properties:
+- silabs,pll-source: pair of (number, source) for each pll. Allows
+  to overwrite clock source of pll A (number=0) or B (number=1).
+
+==Child nodes==
+
+Each of the clock outputs can be overwritten individually by
+using a child node to the I2C device node. If a child node for a clock
+output is not set, the eeprom configuration is not overwritten.
+
+Required child node properties:
+- reg: number of clock output.
+
+Optional child node properties:
+- silabs,clock-source: source clock of the output divider stage N, shall be
+  0 = multisynth N
+  1 = multisynth 0 for output clocks 0-3, else multisynth4
+  2 = xtal
+  3 = clkin (si5351c only)
+- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}.
+- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth
+  divider.
+- silabs,pll-master: boolean, multisynth can change pll frequency.
+- silabs,pll-reset: boolean, clock output can reset its pll.
+- silabs,disable-state : clock output disable state, shall be
+  0 = clock output is driven LOW when disabled
+  1 = clock output is driven HIGH when disabled
+  2 = clock output is FLOATING (HIGH-Z) when disabled
+  3 = clock output is NEVER disabled
+
+==Example==
+
+/* 25MHz reference crystal */
+ref25: ref25M {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <25000000>;
+};
+
+i2c-master-node {
+
+	/* Si5351a msop10 i2c clock generator */
+	si5351a: clock-generator@60 {
+		compatible = "silabs,si5351a-msop";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#clock-cells = <1>;
+
+		/* connect xtal input to 25MHz reference */
+		clocks = <&ref25>;
+		clock-names = "xtal";
+
+		/* connect xtal input as source of pll0 and pll1 */
+		silabs,pll-source = <0 0>, <1 0>;
+
+		/*
+		 * overwrite clkout0 configuration with:
+		 * - 8mA output drive strength
+		 * - pll0 as clock source of multisynth0
+		 * - multisynth0 as clock source of output divider
+		 * - multisynth0 can change pll0
+		 * - set initial clock frequency of 74.25MHz
+		 */
+		clkout0 {
+			reg = <0>;
+			silabs,drive-strength = <8>;
+			silabs,multisynth-source = <0>;
+			silabs,clock-source = <0>;
+			silabs,pll-master;
+			clock-frequency = <74250000>;
+		};
+
+		/*
+		 * overwrite clkout1 configuration with:
+		 * - 4mA output drive strength
+		 * - pll1 as clock source of multisynth1
+		 * - multisynth1 as clock source of output divider
+		 * - multisynth1 can change pll1
+		 */
+		clkout1 {
+			reg = <1>;
+			silabs,drive-strength = <4>;
+			silabs,multisynth-source = <1>;
+			silabs,clock-source = <0>;
+			pll-master;
+		};
+
+		/*
+		 * overwrite clkout2 configuration with:
+		 * - xtal as clock source of output divider
+		 */
+		clkout2 {
+			reg = <2>;
+			silabs,clock-source = <2>;
+		};
+	};
+};
diff --git a/Bindings/clock/silabs,si544.txt b/Bindings/clock/silabs,si544.txt
new file mode 100644
index 0000000..b86535b
--- /dev/null
+++ b/Bindings/clock/silabs,si544.txt
@@ -0,0 +1,25 @@
+Binding for Silicon Labs 544 programmable I2C clock generator.
+
+Reference
+This binding uses the common clock binding[1]. Details about the device can be
+found in the datasheet[2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Si544 datasheet
+    https://www.silabs.com/documents/public/data-sheets/si544-datasheet.pdf
+
+Required properties:
+ - compatible: One of "silabs,si514a", "silabs,si514b" "silabs,si514c" according
+               to the speed grade of the chip.
+ - reg: I2C device address.
+ - #clock-cells: From common clock bindings: Shall be 0.
+
+Optional properties:
+ - clock-output-names: From common clock bindings. Recommended to be "si544".
+
+Example:
+	si544: clock-controller@55 {
+		reg = <0x55>;
+		#clock-cells = <0>;
+		compatible = "silabs,si544b";
+	};
diff --git a/Bindings/clock/silabs,si570.txt b/Bindings/clock/silabs,si570.txt
new file mode 100644
index 0000000..5dda17d
--- /dev/null
+++ b/Bindings/clock/silabs,si570.txt
@@ -0,0 +1,41 @@
+Binding for Silicon Labs 570, 571, 598 and 599 programmable
+I2C clock generators.
+
+Reference
+This binding uses the common clock binding[1]. Details about the devices can be
+found in the data sheets[2][3].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Si570/571 Data Sheet
+    https://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf
+[3] Si598/599 Data Sheet
+    https://www.silabs.com/Support%20Documents/TechnicalDocs/si598-99.pdf
+
+Required properties:
+ - compatible: Shall be one of "silabs,si570", "silabs,si571",
+			       "silabs,si598", "silabs,si599"
+ - reg: I2C device address.
+ - #clock-cells: From common clock bindings: Shall be 0.
+ - factory-fout: Factory set default frequency. This frequency is part specific.
+		 The correct frequency for the part used has to be provided in
+		 order to generate the correct output frequencies. For more
+		 details, please refer to the data sheet.
+ - temperature-stability: Temperature stability of the device in PPM. Should be
+			  one of: 7, 20, 50 or 100.
+
+Optional properties:
+ - clock-output-names: From common clock bindings. Recommended to be "si570".
+ - clock-frequency: Output frequency to generate. This defines the output
+		    frequency set during boot. It can be reprogrammed during
+		    runtime through the common clock framework.
+ - silabs,skip-recall: Do not perform NVM->RAM recall operation. It will rely
+		       on hardware loading of RAM from NVM at power on.
+
+Example:
+	si570: clock-generator@5d {
+		#clock-cells = <0>;
+		compatible = "silabs,si570";
+		temperature-stability = <50>;
+		reg = <0x5d>;
+		factory-fout = <156250000>;
+	};
diff --git a/Bindings/clock/skyworks,si521xx.yaml b/Bindings/clock/skyworks,si521xx.yaml
new file mode 100644
index 0000000..9e35e0e
--- /dev/null
+++ b/Bindings/clock/skyworks,si521xx.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/skyworks,si521xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Skyworks Si521xx I2C PCIe clock generators
+
+description: |
+  The Skyworks Si521xx are I2C PCIe clock generators providing
+  from 4 to 9 output clocks.
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  compatible:
+    enum:
+      - skyworks,si52144
+      - skyworks,si52146
+      - skyworks,si52147
+
+  reg:
+    const: 0x6b
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: XTal input clock
+
+  skyworks,out-amplitude-microvolt:
+    enum: [ 300000, 400000, 500000, 600000, 700000, 800000, 900000, 1000000 ]
+    description: Output clock signal amplitude
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        clock-generator@6b {
+            compatible = "skyworks,si52144";
+            reg = <0x6b>;
+            #clock-cells = <1>;
+            clocks = <&ref25m>;
+        };
+    };
+
+...
diff --git a/Bindings/clock/snps,hsdk-pll-clock.txt b/Bindings/clock/snps,hsdk-pll-clock.txt
new file mode 100644
index 0000000..c56c755
--- /dev/null
+++ b/Bindings/clock/snps,hsdk-pll-clock.txt
@@ -0,0 +1,28 @@
+Binding for the HSDK Generic PLL clock
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: should be "snps,hsdk-<name>-pll-clock"
+  "snps,hsdk-core-pll-clock"
+  "snps,hsdk-gp-pll-clock"
+  "snps,hsdk-hdmi-pll-clock"
+- reg : should contain base register location and length.
+- clocks: shall be the input parent clock phandle for the PLL.
+- #clock-cells: from common clock binding; Should always be set to 0.
+
+Example:
+	input_clk: input-clk {
+		clock-frequency = <33333333>;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	cpu_clk: cpu-clk@0 {
+		compatible = "snps,hsdk-core-pll-clock";
+		reg = <0x00 0x10>;
+		#clock-cells = <0>;
+		clocks = <&input_clk>;
+	};
diff --git a/Bindings/clock/snps,pll-clock.txt b/Bindings/clock/snps,pll-clock.txt
new file mode 100644
index 0000000..11fe487
--- /dev/null
+++ b/Bindings/clock/snps,pll-clock.txt
@@ -0,0 +1,28 @@
+Binding for the AXS10X Generic PLL clock
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: should be "snps,axs10x-<name>-pll-clock"
+  "snps,axs10x-arc-pll-clock"
+  "snps,axs10x-pgu-pll-clock"
+- reg: should always contain 2 pairs address - length: first for PLL config
+registers and second for corresponding LOCK CGU register.
+- clocks: shall be the input parent clock phandle for the PLL.
+- #clock-cells: from common clock binding; Should always be set to 0.
+
+Example:
+	input-clk: input-clk {
+		clock-frequency = <33333333>;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	core-clk: core-clk@80 {
+		compatible = "snps,axs10x-arc-pll-clock";
+		reg = <0x80 0x10>, <0x100 0x10>;
+		#clock-cells = <0>;
+		clocks = <&input-clk>;
+	};
diff --git a/Bindings/clock/socionext,uniphier-clock.yaml b/Bindings/clock/socionext,uniphier-clock.yaml
new file mode 100644
index 0000000..4e82582
--- /dev/null
+++ b/Bindings/clock/socionext,uniphier-clock.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/socionext,uniphier-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier clock controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: System clock
+        enum:
+          - socionext,uniphier-ld4-clock
+          - socionext,uniphier-pro4-clock
+          - socionext,uniphier-sld8-clock
+          - socionext,uniphier-pro5-clock
+          - socionext,uniphier-pxs2-clock
+          - socionext,uniphier-ld6b-clock
+          - socionext,uniphier-ld11-clock
+          - socionext,uniphier-ld20-clock
+          - socionext,uniphier-pxs3-clock
+          - socionext,uniphier-nx1-clock
+      - description: Media I/O (MIO) clock, SD clock
+        enum:
+          - socionext,uniphier-ld4-mio-clock
+          - socionext,uniphier-pro4-mio-clock
+          - socionext,uniphier-sld8-mio-clock
+          - socionext,uniphier-pro5-sd-clock
+          - socionext,uniphier-pxs2-sd-clock
+          - socionext,uniphier-ld11-mio-clock
+          - socionext,uniphier-ld20-sd-clock
+          - socionext,uniphier-pxs3-sd-clock
+          - socionext,uniphier-nx1-sd-clock
+      - description: Peripheral clock
+        enum:
+          - socionext,uniphier-ld4-peri-clock
+          - socionext,uniphier-pro4-peri-clock
+          - socionext,uniphier-sld8-peri-clock
+          - socionext,uniphier-pro5-peri-clock
+          - socionext,uniphier-pxs2-peri-clock
+          - socionext,uniphier-ld11-peri-clock
+          - socionext,uniphier-ld20-peri-clock
+          - socionext,uniphier-pxs3-peri-clock
+          - socionext,uniphier-nx1-peri-clock
+      - description: SoC-glue clock
+        enum:
+          - socionext,uniphier-pro4-sg-clock
+
+  "#clock-cells":
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#clock-cells"
+
+examples:
+  - |
+    clock-controller {
+        compatible = "socionext,uniphier-ld11-clock";
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/sprd,sc9860-clk.txt b/Bindings/clock/sprd,sc9860-clk.txt
new file mode 100644
index 0000000..aaaf02c
--- /dev/null
+++ b/Bindings/clock/sprd,sc9860-clk.txt
@@ -0,0 +1,63 @@
+Spreadtrum SC9860 Clock Binding
+------------------------
+
+Required properties:
+- compatible: should contain the following compatible strings:
+	- "sprd,sc9860-pmu-gate"
+	- "sprd,sc9860-pll"
+	- "sprd,sc9860-ap-clk"
+	- "sprd,sc9860-aon-prediv"
+	- "sprd,sc9860-apahb-gate"
+	- "sprd,sc9860-aon-gate"
+	- "sprd,sc9860-aonsecure-clk"
+	- "sprd,sc9860-agcp-gate"
+	- "sprd,sc9860-gpu-clk"
+	- "sprd,sc9860-vsp-clk"
+	- "sprd,sc9860-vsp-gate"
+	- "sprd,sc9860-cam-clk"
+	- "sprd,sc9860-cam-gate"
+	- "sprd,sc9860-disp-clk"
+	- "sprd,sc9860-disp-gate"
+	- "sprd,sc9860-apapb-gate"
+
+- #clock-cells: must be 1
+
+- clocks : Should be the input parent clock(s) phandle for the clock, this
+	   property here just simply shows which clock group the clocks'
+	   parents are in, since each clk node would represent many clocks
+	   which are defined in the driver.  The detailed dependency
+	   relationship (i.e. how many parents and which are the parents)
+	   are implemented in driver code.
+
+Optional properties:
+
+- reg:	Contain the registers base address and length. It must be configured
+	only if no 'sprd,syscon' under the node.
+
+- sprd,syscon: phandle to the syscon which is in the same address area with
+	       the clock, and so we can get regmap for the clocks from the
+	       syscon device.
+
+Example:
+
+	pmu_gate: pmu-gate {
+		compatible = "sprd,sc9860-pmu-gate";
+		sprd,syscon = <&pmu_regs>;
+		clocks = <&ext_26m>;
+		#clock-cells = <1>;
+	};
+
+	pll: pll {
+		compatible = "sprd,sc9860-pll";
+		sprd,syscon = <&ana_regs>;
+		clocks = <&pmu_gate 0>;
+		#clock-cells = <1>;
+	};
+
+	ap_clk: clock-controller@20000000 {
+		compatible = "sprd,sc9860-ap-clk";
+		reg = <0 0x20000000 0 0x400>;
+		clocks = <&ext_26m>, <&pll 0>,
+			 <&pmu_gate 0>;
+		#clock-cells = <1>;
+	};
diff --git a/Bindings/clock/sprd,sc9863a-clk.yaml b/Bindings/clock/sprd,sc9863a-clk.yaml
new file mode 100644
index 0000000..a065805
--- /dev/null
+++ b/Bindings/clock/sprd,sc9863a-clk.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sprd,sc9863a-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SC9863A Clock Control Unit
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - sprd,sc9863a-ap-clk
+      - sprd,sc9863a-aon-clk
+      - sprd,sc9863a-apahb-gate
+      - sprd,sc9863a-pmu-gate
+      - sprd,sc9863a-aonapb-gate
+      - sprd,sc9863a-pll
+      - sprd,sc9863a-mpll
+      - sprd,sc9863a-rpll
+      - sprd,sc9863a-dpll
+      - sprd,sc9863a-mm-gate
+      - sprd,sc9863a-mm-clk
+      - sprd,sc9863a-apapb-gate
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: |
+      The input parent clock(s) phandle for this clock, only list fixed
+      clocks which are declared in devicetree.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ext-26m
+      - const: ext-32k
+      - const: ext-4m
+      - const: rco-100m
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+
+if:
+  properties:
+    compatible:
+      enum:
+        - sprd,sc9863a-ap-clk
+        - sprd,sc9863a-aon-clk
+then:
+  required:
+    - reg
+
+else:
+  description: |
+    Other SC9863a clock nodes should be the child of a syscon node in
+    which compatible string should be:
+            "sprd,sc9863a-glbregs", "syscon", "simple-mfd"
+
+    The 'reg' property for the clock node is also required if there is a sub
+    range of registers for the clocks.
+
+additionalProperties: false
+
+examples:
+  - |
+    ap_clk: clock-controller@21500000 {
+      compatible = "sprd,sc9863a-ap-clk";
+      reg = <0x21500000 0x1000>;
+      clocks = <&ext_26m>, <&ext_32k>;
+      clock-names = "ext-26m", "ext-32k";
+      #clock-cells = <1>;
+    };
+
+  - |
+    syscon@20e00000 {
+      compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd";
+      reg = <0x20e00000 0x4000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0 0x20e00000 0x4000>;
+
+      apahb_gate: apahb-gate@0 {
+        compatible = "sprd,sc9863a-apahb-gate";
+        reg = <0x0 0x1020>;
+        #clock-cells = <1>;
+      };
+    };
+
+...
diff --git a/Bindings/clock/sprd,ums512-clk.yaml b/Bindings/clock/sprd,ums512-clk.yaml
new file mode 100644
index 0000000..43d2b6c
--- /dev/null
+++ b/Bindings/clock/sprd,ums512-clk.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sprd,ums512-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UMS512 Soc clock controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sprd,ums512-apahb-gate
+      - sprd,ums512-ap-clk
+      - sprd,ums512-aonapb-clk
+      - sprd,ums512-pmu-gate
+      - sprd,ums512-g0-pll
+      - sprd,ums512-g2-pll
+      - sprd,ums512-g3-pll
+      - sprd,ums512-gc-pll
+      - sprd,ums512-aon-gate
+      - sprd,ums512-audcpapb-gate
+      - sprd,ums512-audcpahb-gate
+      - sprd,ums512-gpu-clk
+      - sprd,ums512-mm-clk
+      - sprd,ums512-mm-gate-clk
+      - sprd,ums512-apapb-gate
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: |
+      The input parent clock(s) phandle for the clock, only list
+      fixed clocks which are declared in devicetree.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ext-26m
+      - const: ext-32k
+      - const: ext-4m
+      - const: rco-100m
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ap_clk: clock-controller@20200000 {
+      compatible = "sprd,ums512-ap-clk";
+      reg = <0x20200000 0x1000>;
+      clocks = <&ext_26m>;
+      clock-names = "ext-26m";
+      #clock-cells = <1>;
+    };
+...
diff --git a/Bindings/clock/st,nomadik.txt b/Bindings/clock/st,nomadik.txt
new file mode 100644
index 0000000..40e0cf1
--- /dev/null
+++ b/Bindings/clock/st,nomadik.txt
@@ -0,0 +1,104 @@
+ST Microelectronics Nomadik SRC System Reset and Control
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The Nomadik SRC controller is responsible of controlling chrystals,
+PLLs and clock gates.
+
+Required properties for the SRC node:
+- compatible: must be "stericsson,nomadik-src"
+- reg: must contain the SRC register base and size
+
+Optional properties for the SRC node:
+- disable-sxtalo: if present this will disable the SXTALO
+  i.e. the driver output for the slow 32kHz chrystal, if the
+  board has its own circuitry for providing this oscillator
+- disable-mxtal: if present this will disable the MXTALO,
+  i.e. the driver output for the main (~19.2 MHz) chrystal,
+  if the board has its own circuitry for providing this
+  oscillator
+
+
+PLL nodes: these nodes represent the two PLLs on the system,
+which should both have the main chrystal, represented as a
+fixed frequency clock, as parent.
+
+Required properties for the two PLL nodes:
+- compatible: must be "st,nomadik-pll-clock"
+- clock-cells: must be 0
+- clock-id: must be 1 or 2 for PLL1 and PLL2 respectively
+- clocks: this clock will have main chrystal as parent
+
+
+HCLK nodes: these represent the clock gates on individual
+lines from the HCLK clock tree and the gate for individual
+lines from the PCLK clock tree.
+
+Requires properties for the HCLK nodes:
+- compatible: must be "st,nomadik-hclk-clock"
+- clock-cells: must be 0
+- clock-id: must be the clock ID from 0 to 63 according to
+  this table:
+
+	0:  HCLKDMA0
+	1:  HCLKSMC
+	2:  HCLKSDRAM
+	3:  HCLKDMA1
+	4:  HCLKCLCD
+	5:  PCLKIRDA
+	6:  PCLKSSP
+	7:  PCLKUART0
+	8:  PCLKSDI
+	9:  PCLKI2C0
+	10: PCLKI2C1
+	11: PCLKUART1
+	12: PCLMSP0
+	13: HCLKUSB
+	14: HCLKDIF
+	15: HCLKSAA
+	16: HCLKSVA
+	17: PCLKHSI
+	18: PCLKXTI
+	19: PCLKUART2
+	20: PCLKMSP1
+	21: PCLKMSP2
+	22: PCLKOWM
+	23: HCLKHPI
+	24: PCLKSKE
+	25: PCLKHSEM
+	26: HCLK3D
+	27: HCLKHASH
+	28: HCLKCRYP
+	29: PCLKMSHC
+	30: HCLKUSBM
+	31: HCLKRNG
+	(32, 33, 34, 35 RESERVED)
+	36: CLDCLK
+	37: IRDACLK
+	38: SSPICLK
+	39: UART0CLK
+	40: SDICLK
+	41: I2C0CLK
+	42: I2C1CLK
+	43: UART1CLK
+	44: MSPCLK0
+	45: USBCLK
+	46: DIFCLK
+	47: IPI2CCLK
+	48: IPBMCCLK
+	49: HSICLKRX
+	50: HSICLKTX
+	51: UART2CLK
+	52: MSPCLK1
+	53: MSPCLK2
+	54: OWMCLK
+	(55 RESERVED)
+	56: SKECLK
+	(57 RESERVED)
+	58: 3DCLK
+	59: PCLKMSP3
+	60: MSPCLK3
+	61: MSHCCLK
+	62: USBMCLK
+	63: RNGCCLK
diff --git a/Bindings/clock/st,stm32-rcc.txt b/Bindings/clock/st,stm32-rcc.txt
new file mode 100644
index 0000000..cfa04b6
--- /dev/null
+++ b/Bindings/clock/st,stm32-rcc.txt
@@ -0,0 +1,138 @@
+STMicroelectronics STM32 Reset and Clock Controller
+===================================================
+
+The RCC IP is both a reset and a clock controller.
+
+Please refer to clock-bindings.txt for common clock controller binding usage.
+Please also refer to reset.txt for common reset controller binding usage.
+
+Required properties:
+- compatible: Should be:
+  "st,stm32f42xx-rcc"
+  "st,stm32f469-rcc"
+  "st,stm32f746-rcc"
+  "st,stm32f769-rcc"
+
+- reg: should be register base and length as documented in the
+  datasheet
+- #reset-cells: 1, see below
+- #clock-cells: 2, device nodes should specify the clock in their "clocks"
+  property, containing a phandle to the clock device node, an index selecting
+  between gated clocks and other clocks and an index specifying the clock to
+  use.
+- clocks: External oscillator clock phandle
+  - high speed external clock signal (HSE)
+  - external I2S clock (I2S_CKIN)
+
+Example:
+
+	rcc: rcc@40023800 {
+		#reset-cells = <1>;
+		#clock-cells = <2>
+		compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
+		reg = <0x40023800 0x400>;
+		clocks = <&clk_hse>, <&clk_i2s_ckin>;
+	};
+
+Specifying gated clocks
+=======================
+
+The primary index must be set to 0.
+
+The secondary index is the bit number within the RCC register bank, starting
+from the first RCC clock enable register (RCC_AHB1ENR, address offset 0x30).
+
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register (LSB is 0, MSB is 31).
+
+To simplify the usage and to share bit definition with the reset and clock
+drivers of the RCC IP, macros are available to generate the index in
+human-readble format.
+
+For STM32F4 series, the macro are available here:
+ - include/dt-bindings/mfd/stm32f4-rcc.h
+
+Example:
+
+	/* Gated clock, AHB1 bit 0 (GPIOA) */
+	... {
+		clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>
+	};
+
+	/* Gated clock, AHB2 bit 4 (CRYP) */
+	... {
+		clocks = <&rcc 0 STM32F4_AHB2_CLOCK(CRYP)>
+	};
+
+Specifying other clocks
+=======================
+
+The primary index must be set to 1.
+
+The secondary index is bound with the following magic numbers:
+
+	0	SYSTICK
+	1	FCLK
+	2	CLK_LSI		(low-power clock source)
+	3	CLK_LSE		(generated from a 32.768 kHz low-speed external
+				 crystal or ceramic resonator)
+	4	CLK_HSE_RTC	(HSE division factor for RTC clock)
+	5	CLK_RTC		(real-time clock)
+	6	PLL_VCO_I2S	(vco frequency of I2S pll)
+	7	PLL_VCO_SAI	(vco frequency of SAI pll)
+	8	CLK_LCD		(LCD-TFT)
+	9	CLK_I2S		(I2S clocks)
+	10	CLK_SAI1	(audio clocks)
+	11	CLK_SAI2
+	12	CLK_I2SQ_PDIV	(post divisor of pll i2s q divisor)
+	13	CLK_SAIQ_PDIV	(post divisor of pll sai q divisor)
+
+	14	CLK_HSI		(Internal ocscillator clock)
+	15	CLK_SYSCLK	(System Clock)
+	16	CLK_HDMI_CEC	(HDMI-CEC clock)
+	17	CLK_SPDIF	(SPDIF-Rx clock)
+	18	CLK_USART1	(U(s)arts clocks)
+	19	CLK_USART2
+	20	CLK_USART3
+	21	CLK_UART4
+	22	CLK_UART5
+	23	CLK_USART6
+	24	CLK_UART7
+	25	CLK_UART8
+	26	CLK_I2C1	(I2S clocks)
+	27	CLK_I2C2
+	28	CLK_I2C3
+	29	CLK_I2C4
+	30	CLK_LPTIMER	(LPTimer1 clock)
+	31	CLK_PLL_SRC
+	32	CLK_DFSDM1
+	33	CLK_ADFSDM1
+	34	CLK_F769_DSI
+)
+
+Example:
+
+	/* Misc clock, FCLK */
+	... {
+		clocks = <&rcc 1 STM32F4_APB1_CLOCK(TIM2)>
+	};
+
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the reset device node and an index specifying
+which channel to use.
+The index is the bit number within the RCC registers bank, starting from RCC
+base address.
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register.
+For example, for CRC reset:
+  crc = AHB1RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x10 / 4 * 32 + 12 = 140
+
+example:
+
+	timer2 {
+		resets	= <&rcc STM32F4_APB1_RESET(TIM2)>;
+	};
diff --git a/Bindings/clock/st,stm32h7-rcc.txt b/Bindings/clock/st,stm32h7-rcc.txt
new file mode 100644
index 0000000..cac24ee
--- /dev/null
+++ b/Bindings/clock/st,stm32h7-rcc.txt
@@ -0,0 +1,71 @@
+STMicroelectronics STM32H7 Reset and Clock Controller
+=====================================================
+
+The RCC IP is both a reset and a clock controller.
+
+Please refer to clock-bindings.txt for common clock controller binding usage.
+Please also refer to reset.txt for common reset controller binding usage.
+
+Required properties:
+- compatible: Should be:
+  "st,stm32h743-rcc"
+
+- reg: should be register base and length as documented in the
+  datasheet
+
+- #reset-cells: 1, see below
+
+- #clock-cells : from common clock binding; shall be set to 1
+
+- clocks: External oscillator clock phandle
+  - high speed external clock signal (HSE)
+  - low speed external clock signal (LSE)
+  - external I2S clock (I2S_CKIN)
+
+Optional properties:
+- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain
+  write protection (RTC clock).
+
+Example:
+
+	rcc: reset-clock-controller@58024400 {
+		compatible = "st,stm32h743-rcc", "st,stm32-rcc";
+		reg = <0x58024400 0x400>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>;
+
+		st,syscfg = <&pwrcfg>;
+};
+
+The peripheral clock consumer should specify the desired clock by
+having the clock ID in its "clocks" phandle cell.
+
+Example:
+
+		timer5: timer@40000c00 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000c00 0x400>;
+			interrupts = <50>;
+			clocks = <&rcc TIM5_CK>;
+		};
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the reset device node and an index specifying
+which channel to use.
+The index is the bit number within the RCC registers bank, starting from RCC
+base address.
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register.
+
+For example, for CRC reset:
+  crc = AHB4RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x88 / 4 * 32 + 19 = 1107
+
+Example:
+
+	timer2 {
+		resets	= <&rcc STM32H7_APB1L_RESET(TIM2)>;
+	};
diff --git a/Bindings/clock/st,stm32mp1-rcc.yaml b/Bindings/clock/st,stm32mp1-rcc.yaml
new file mode 100644
index 0000000..5194be0
--- /dev/null
+++ b/Bindings/clock/st,stm32mp1-rcc.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/st,stm32mp1-rcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32MP1 Reset Clock Controller
+
+maintainers:
+  - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
+
+description: |
+  The RCC IP is both a reset and a clock controller.
+  RCC makes also power management (resume/supend and wakeup interrupt).
+  Please also refer to reset.txt for common reset controller binding usage.
+
+  This binding uses common clock bindings
+  Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+  Specifying clocks
+  =================
+
+  All available clocks are defined as preprocessor macros in
+  dt-bindings/clock/stm32mp1-clks.h header and can be used in device
+  tree sources.
+
+  Specifying softreset control of devices
+  =======================================
+
+  Device nodes should specify the reset channel required in their "resets"
+  property, containing a phandle to the reset device node and an index specifying
+  which channel to use.
+  The index is the bit number within the RCC registers bank, starting from RCC
+  base address.
+  It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+  Where bit_offset is the bit offset within the register.
+
+  For example on STM32MP1, for LTDC reset:
+     ltdc = APB4_RSTSETR_offset / 4 * 32 + LTDC_bit_offset
+          = 0x180 / 4 * 32 + 0 = 3072
+
+  The list of valid indices for STM32MP1 is available in:
+  include/dt-bindings/reset-controller/stm32mp1-resets.h
+  include/dt-bindings/reset-controller/stm32mp13-resets.h
+
+  This file implements defines like:
+  #define LTDC_R	3072
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    items:
+      - enum:
+          - st,stm32mp1-rcc-secure
+          - st,stm32mp1-rcc
+          - st,stm32mp13-rcc
+      - const: syscon
+  clocks: true
+  clock-names: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,stm32mp1-rcc-secure
+          - st,stm32mp13-rcc
+then:
+  properties:
+    clocks:
+      description: Specifies oscillators.
+      maxItems: 5
+
+    clock-names:
+      items:
+        - const: hse
+        - const: hsi
+        - const: csi
+        - const: lse
+        - const: lsi
+  required:
+    - clocks
+    - clock-names
+else:
+  properties:
+    clocks:
+      description:
+        Specifies the external RX clock for ethernet MAC.
+      maxItems: 1
+
+    clock-names:
+      const: ETH_RX_CLK/ETH_REF_CLK
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    rcc: rcc@50000000 {
+        compatible = "st,stm32mp1-rcc-secure", "syscon";
+        reg = <0x50000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        clock-names = "hse", "hsi", "csi", "lse", "lsi";
+        clocks = <&scmi_clk CK_SCMI_HSE>,
+                 <&scmi_clk CK_SCMI_HSI>,
+                 <&scmi_clk CK_SCMI_CSI>,
+                 <&scmi_clk CK_SCMI_LSE>,
+                 <&scmi_clk CK_SCMI_LSI>;
+    };
+...
diff --git a/Bindings/clock/st/st,clkgen-mux.txt b/Bindings/clock/st/st,clkgen-mux.txt
new file mode 100644
index 0000000..9a46cb1
--- /dev/null
+++ b/Bindings/clock/st/st,clkgen-mux.txt
@@ -0,0 +1,32 @@
+Binding for a ST multiplexed clock driver.
+
+This binding supports only simple indexed multiplexers, it does not
+support table based parent index to hardware value translations.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+
+- compatible : shall be:
+	"st,stih407-clkgen-a9-mux"
+
+- #clock-cells : from common clock binding; shall be set to 0.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+Example:
+
+	clk_m_a9: clk-m-a9@92b0000 {
+		#clock-cells = <0>;
+		compatible = "st,stih407-clkgen-a9-mux";
+		reg = <0x92b0000 0x10000>;
+
+		clocks = <&clockgen_a9_pll 0>,
+			 <&clockgen_a9_pll 0>,
+			 <&clk_s_c0_flexgen 13>,
+			 <&clk_m_a9_ext2f_div2>;
+	};
diff --git a/Bindings/clock/st/st,clkgen-pll.txt b/Bindings/clock/st/st,clkgen-pll.txt
new file mode 100644
index 0000000..d0fa1e0
--- /dev/null
+++ b/Bindings/clock/st/st,clkgen-pll.txt
@@ -0,0 +1,40 @@
+Binding for a ST pll clock driver.
+
+This binding uses the common clock binding[1].
+Base address is located to the parent node. See clock binding[2]
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+
+Required properties:
+
+- compatible : shall be:
+	"st,clkgen-pll0"
+	"st,clkgen-pll0-a0"
+	"st,clkgen-pll0-c0"
+	"st,clkgen-pll1"
+	"st,clkgen-pll1-c0"
+	"st,stih407-clkgen-plla9"
+	"st,stih418-clkgen-plla9"
+
+- #clock-cells : From common clock binding; shall be set to 1.
+
+- clocks : From common clock binding
+
+- clock-output-names : From common clock binding.
+
+Example:
+
+	clockgen-a9@92b0000 {
+		compatible = "st,clkgen-c32";
+		reg = <0x92b0000 0xffff>;
+
+		clockgen_a9_pll: clockgen-a9-pll {
+			#clock-cells = <1>;
+			compatible = "st,stih407-clkgen-plla9";
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clockgen-a9-pll-odf";
+		};
+	};
diff --git a/Bindings/clock/st/st,clkgen.txt b/Bindings/clock/st/st,clkgen.txt
new file mode 100644
index 0000000..45ac19b
--- /dev/null
+++ b/Bindings/clock/st/st,clkgen.txt
@@ -0,0 +1,68 @@
+Binding for a Clockgen hardware block found on
+certain STMicroelectronics consumer electronics SoC devices.
+
+A Clockgen node can contain pll, diviser or multiplexer nodes.
+
+We will find only the base address of the Clockgen, this base
+address is common of all subnode.
+
+	clockgen_node {
+		reg = <>;
+
+		pll_node {
+			...
+		};
+
+		quadfs_node {
+			...
+		};
+
+		mux_node {
+			...
+		};
+
+		flexgen_node {
+			...
+		};
+		...
+	};
+
+This binding uses the common clock binding[1].
+Each subnode should use the binding described in [2]..[7]
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
+[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt
+
+
+Required properties:
+- reg : A Base address and length of the register set.
+
+Example:
+
+	clockgen-a@90ff000 {
+		compatible = "st,clkgen-c32";
+		reg = <0x90ff000 0x1000>;
+
+		clk_s_a0_pll: clk-s-a0-pll {
+			#clock-cells = <1>;
+			compatible = "st,clkgen-pll0";
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-a0-pll-ofd-0";
+		};
+
+		clk_s_a0_flexgen: clk-s-a0-flexgen {
+			compatible = "st,flexgen";
+
+			#clock-cells = <1>;
+
+			clocks = <&clk_s_a0_pll 0>,
+				 <&clk_sysin>;
+
+			clock-output-names = "clk-ic-lmi0";
+		};
+	};
diff --git a/Bindings/clock/st/st,flexgen.txt b/Bindings/clock/st/st,flexgen.txt
new file mode 100644
index 0000000..c918075
--- /dev/null
+++ b/Bindings/clock/st/st,flexgen.txt
@@ -0,0 +1,133 @@
+Binding for a type of flexgen structure found on certain
+STMicroelectronics consumer electronics SoC devices
+
+This structure includes:
+- a clock cross bar (represented by a mux element)
+- a pre and final dividers (represented by a divider and gate elements)
+
+Flexgen structure is a part of Clockgen[1].
+
+Please find an example below:
+
+    Clockgen block diagram
+    -------------------------------------------------------------------
+   |                     Flexgen structure                             |
+   |                  ---------------------------------------------    |
+   |                 |    -------       --------       --------    |   |
+clk_sysin            |   |       |     |        |     |        |   |   |
+---|-----------------|-->|       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |Pre     |     |Final   |   |   |
+   | |  |PLL0   |    |   |       |     |Dividers|     |Dividers|   |   |
+   | |->|       |    |   |       |     |  x32   |     |  x32   |   |   |
+   | |  |  odf_0|----|-->|       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   | Clock |     |        |     |        |   |   |
+   | |  |PLL1   |    |   |       |     |        |     |        |   |   |
+   | |->|       |    |   | Cross |     |        |     |        |   |   |
+   | |  |  odf_0|----|-->|       |     |        |     |        | CLK_DIV[31:0]
+   | |  |       |    |   | Bar   |====>|        |====>|        |===|=========>
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |  |QUADFS |    |   |       |     |        |     |        |   |   |
+   | |->|    ch0|----|-->|       |     |        |     |        |   |   |
+   |    |       |    |   |       |     |        |     |        |   |   |
+   |    |    ch1|----|-->|       |     |        |     |        |   |   |
+   |    |       |    |   |       |     |        |     |        |   |   |
+   |    |    ch2|----|-->|       |     | DIV    |     | DIV    |   |   |
+   |    |       |    |   |       |     |  1 to  |     |  1 to  |   |   |
+   |    |    ch3|----|-->|       |     |   1024 |     |     64 |   |   |
+   |     -------     |   |       |     |        |     |        |   |   |
+   |                 |    -------       --------       --------    |   |
+   |                   --------------------------------------------    |
+   |                                                                   |
+    -------------------------------------------------------------------
+
+This binding uses the common clock binding[2].
+
+[1] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+  "st,flexgen"
+  "st,flexgen-audio", "st,flexgen" (enable clock propagation on parent for
+  audio use case)
+  "st,flexgen-video", "st,flexgen" (enable clock propagation on parent
+					and activate synchronous mode)
+  "st,flexgen-stih407-a0"
+  "st,flexgen-stih410-a0"
+  "st,flexgen-stih407-c0"
+  "st,flexgen-stih410-c0"
+  "st,flexgen-stih418-c0"
+  "st,flexgen-stih407-d0"
+  "st,flexgen-stih410-d0"
+  "st,flexgen-stih407-d2"
+  "st,flexgen-stih418-d2"
+  "st,flexgen-stih407-d3"
+
+- #clock-cells : from common clock binding; shall be set to 1 (multiple clock
+  outputs).
+
+- clocks : must be set to the parent's phandle. it could be output clocks of
+  a quadsfs or/and a pll or/and clk_sysin (up to 7 clocks)
+
+- clock-output-names : List of strings used to name the clock outputs.
+
+Example:
+
+	clk_s_c0_flexgen: clk-s-c0-flexgen {
+
+		#clock-cells = <1>;
+		compatible = "st,flexgen";
+
+		clocks = <&clk_s_c0_pll0 0>,
+			 <&clk_s_c0_pll1 0>,
+			 <&clk_s_c0_quadfs 0>,
+			 <&clk_s_c0_quadfs 1>,
+			 <&clk_s_c0_quadfs 2>,
+			 <&clk_s_c0_quadfs 3>,
+			 <&clk_sysin>;
+
+		clock-output-names = "clk-icn-gpu",
+				     "clk-fdma",
+				     "clk-nand",
+				     "clk-hva",
+				     "clk-proc-stfe",
+				     "clk-proc-tp",
+				     "clk-rx-icn-dmu",
+				     "clk-rx-icn-hva",
+				     "clk-icn-cpu",
+				     "clk-tx-icn-dmu",
+				     "clk-mmc-0",
+				     "clk-mmc-1",
+				     "clk-jpegdec",
+				     "clk-ext2fa9",
+				     "clk-ic-bdisp-0",
+				     "clk-ic-bdisp-1",
+				     "clk-pp-dmu",
+				     "clk-vid-dmu",
+				     "clk-dss-lpc",
+				     "clk-st231-aud-0",
+				     "clk-st231-gp-1",
+				     "clk-st231-dmu",
+				     "clk-icn-lmi",
+				     "clk-tx-icn-disp-1",
+				     "clk-icn-sbc",
+				     "clk-stfe-frc2",
+				     "clk-eth-phy",
+				     "clk-eth-ref-phyclk",
+				     "clk-flash-promip",
+				     "clk-main-disp",
+				     "clk-aux-disp",
+				     "clk-compo-dvp";
+	};
diff --git a/Bindings/clock/st/st,quadfs.txt b/Bindings/clock/st/st,quadfs.txt
new file mode 100644
index 0000000..c4ba2ad
--- /dev/null
+++ b/Bindings/clock/st/st,quadfs.txt
@@ -0,0 +1,48 @@
+Binding for a type of quad channel digital frequency synthesizer found on
+certain STMicroelectronics consumer electronics SoC devices.
+
+This version contains a programmable PLL which can generate up to 216, 432
+or 660MHz (from a 30MHz oscillator input) as the input to the digital
+synthesizers.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+  "st,quadfs"
+  "st,quadfs-d0"
+  "st,quadfs-d2"
+  "st,quadfs-d3"
+  "st,quadfs-pll"
+
+
+- #clock-cells : from common clock binding; shall be set to 1.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+- clock-output-names : From common clock binding. The block has 4
+                       clock outputs but not all of them in a specific instance
+                       have to be used in the SoC. If a clock name is left as
+                       an empty string then no clock will be created for the
+                       output associated with that string index. If fewer than
+                       4 strings are provided then no clocks will be created
+                       for the remaining outputs.
+
+Example:
+
+	clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+		#clock-cells = <1>;
+		compatible = "st,quadfs-pll";
+		reg = <0x9103000 0x1000>;
+
+		clocks = <&clk_sysin>;
+
+		clock-output-names = "clk-s-c0-fs0-ch0",
+				     "clk-s-c0-fs0-ch1",
+				     "clk-s-c0-fs0-ch2",
+				     "clk-s-c0-fs0-ch3";
+	};
diff --git a/Bindings/clock/starfive,jh7100-audclk.yaml b/Bindings/clock/starfive,jh7100-audclk.yaml
new file mode 100644
index 0000000..8f49a1a
--- /dev/null
+++ b/Bindings/clock/starfive,jh7100-audclk.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7100-audclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Audio Clock Generator
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7100-audclk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Audio source clock
+      - description: External 12.288MHz clock
+      - description: Domain 7 AHB bus clock
+
+  clock-names:
+    items:
+      - const: audio_src
+      - const: audio_12288
+      - const: dom7ahb_bus
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive-jh7100-audio.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive-jh7100.h>
+
+    clock-controller@10480000 {
+            compatible = "starfive,jh7100-audclk";
+            reg = <0x10480000 0x10000>;
+            clocks = <&clkgen JH7100_CLK_AUDIO_SRC>,
+                     <&clkgen JH7100_CLK_AUDIO_12288>,
+                     <&clkgen JH7100_CLK_DOM7AHB_BUS>;
+            clock-names = "audio_src", "audio_12288", "dom7ahb_bus";
+            #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/starfive,jh7100-clkgen.yaml b/Bindings/clock/starfive,jh7100-clkgen.yaml
new file mode 100644
index 0000000..12f17b6
--- /dev/null
+++ b/Bindings/clock/starfive,jh7100-clkgen.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7100-clkgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Clock Generator
+
+maintainers:
+  - Geert Uytterhoeven <geert@linux-m68k.org>
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7100-clkgen
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main clock source (25 MHz)
+      - description: Application-specific clock source (12-27 MHz)
+      - description: RMII reference clock (50 MHz)
+      - description: RGMII RX clock (125 MHz)
+
+  clock-names:
+    items:
+      - const: osc_sys
+      - const: osc_aud
+      - const: gmac_rmii_ref
+      - const: gmac_gr_mii_rxclk
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive-jh7100.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@11800000 {
+            compatible = "starfive,jh7100-clkgen";
+            reg = <0x11800000 0x10000>;
+            clocks = <&osc_sys>, <&osc_aud>, <&gmac_rmii_ref>, <&gmac_gr_mii_rxclk>;
+            clock-names = "osc_sys", "osc_aud", "gmac_rmii_ref", "gmac_gr_mii_rxclk";
+            #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/starfive,jh7110-aoncrg.yaml b/Bindings/clock/starfive,jh7110-aoncrg.yaml
new file mode 100644
index 0000000..923680a
--- /dev/null
+++ b/Bindings/clock/starfive,jh7110-aoncrg.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-aoncrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 Always-On Clock and Reset Generator
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7110-aoncrg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    oneOf:
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC0 RMII reference or GMAC0 RGMII RX
+          - description: STG AXI/AHB
+          - description: APB Bus
+          - description: GMAC0 GTX
+
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC0 RMII reference or GMAC0 RGMII RX
+          - description: STG AXI/AHB or GMAC0 RGMII RX
+          - description: APB Bus or STG AXI/AHB
+          - description: GMAC0 GTX or APB Bus
+          - description: RTC Oscillator (32.768 kHz) or GMAC0 GTX
+
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC0 RMII reference
+          - description: GMAC0 RGMII RX
+          - description: STG AXI/AHB
+          - description: APB Bus
+          - description: GMAC0 GTX
+          - description: RTC Oscillator (32.768 kHz)
+
+  clock-names:
+    oneOf:
+      - minItems: 5
+        items:
+          - const: osc
+          - enum:
+              - gmac0_rmii_refin
+              - gmac0_rgmii_rxin
+          - const: stg_axiahb
+          - const: apb_bus
+          - const: gmac0_gtxclk
+          - const: rtc_osc
+
+      - minItems: 6
+        items:
+          - const: osc
+          - const: gmac0_rmii_refin
+          - const: gmac0_rgmii_rxin
+          - const: stg_axiahb
+          - const: apb_bus
+          - const: gmac0_gtxclk
+          - const: rtc_osc
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+
+    clock-controller@17000000 {
+        compatible = "starfive,jh7110-aoncrg";
+        reg = <0x17000000 0x10000>;
+        clocks = <&osc>, <&gmac0_rmii_refin>,
+                 <&gmac0_rgmii_rxin>,
+                 <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
+                 <&syscrg JH7110_SYSCLK_APB_BUS>,
+                 <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>,
+                 <&rtc_osc>;
+        clock-names = "osc", "gmac0_rmii_refin",
+                      "gmac0_rgmii_rxin", "stg_axiahb",
+                      "apb_bus", "gmac0_gtxclk",
+                      "rtc_osc";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/starfive,jh7110-ispcrg.yaml b/Bindings/clock/starfive,jh7110-ispcrg.yaml
new file mode 100644
index 0000000..3b8b85b
--- /dev/null
+++ b/Bindings/clock/starfive,jh7110-ispcrg.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-ispcrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 Image-Signal-Process Clock and Reset Generator
+
+maintainers:
+  - Xingyu Wu <xingyu.wu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-ispcrg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: ISP Top core
+      - description: ISP Top Axi
+      - description: NOC ISP Bus
+      - description: external DVP
+
+  clock-names:
+    items:
+      - const: isp_top_core
+      - const: isp_top_axi
+      - const: noc_bus_isp_axi
+      - const: dvp_clk
+
+  resets:
+    items:
+      - description: ISP Top core
+      - description: ISP Top Axi
+      - description: NOC ISP Bus
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+  power-domains:
+    maxItems: 1
+    description:
+      ISP domain power
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - '#clock-cells'
+  - '#reset-cells'
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+    #include <dt-bindings/power/starfive,jh7110-pmu.h>
+    #include <dt-bindings/reset/starfive,jh7110-crg.h>
+
+    ispcrg: clock-controller@19810000 {
+        compatible = "starfive,jh7110-ispcrg";
+        reg = <0x19810000 0x10000>;
+        clocks = <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>,
+                 <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>,
+                 <&syscrg JH7110_SYSCLK_NOC_BUS_ISP_AXI>,
+                 <&dvp_clk>;
+        clock-names = "isp_top_core", "isp_top_axi",
+                      "noc_bus_isp_axi", "dvp_clk";
+        resets = <&syscrg JH7110_SYSRST_ISP_TOP>,
+                 <&syscrg JH7110_SYSRST_ISP_TOP_AXI>,
+                 <&syscrg JH7110_SYSRST_NOC_BUS_ISP_AXI>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        power-domains = <&pwrc JH7110_PD_ISP>;
+    };
diff --git a/Bindings/clock/starfive,jh7110-pll.yaml b/Bindings/clock/starfive,jh7110-pll.yaml
new file mode 100644
index 0000000..be8300c
--- /dev/null
+++ b/Bindings/clock/starfive,jh7110-pll.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 PLL Clock Generator
+
+description:
+  These PLLs are high speed, low jitter frequency synthesizers in the JH7110.
+  Each PLL works in integer mode or fraction mode, with configuration
+  registers in the sys syscon. So the PLLs node should be a child of
+  SYS-SYSCON node.
+  The formula for calculating frequency is
+  Fvco = Fref * (NI + NF) / M / Q1
+
+maintainers:
+  - Xingyu Wu <xingyu.wu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-pll
+
+  clocks:
+    maxItems: 1
+    description: Main Oscillator (24 MHz)
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller {
+      compatible = "starfive,jh7110-pll";
+      clocks = <&osc>;
+      #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/starfive,jh7110-stgcrg.yaml b/Bindings/clock/starfive,jh7110-stgcrg.yaml
new file mode 100644
index 0000000..b64ccd8
--- /dev/null
+++ b/Bindings/clock/starfive,jh7110-stgcrg.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-stgcrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 System-Top-Group Clock and Reset Generator
+
+maintainers:
+  - Xingyu Wu <xingyu.wu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-stgcrg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main Oscillator (24 MHz)
+      - description: HIFI4 core
+      - description: STG AXI/AHB
+      - description: USB (125 MHz)
+      - description: CPU Bus
+      - description: HIFI4 Axi
+      - description: NOC STG Bus
+      - description: APB Bus
+
+  clock-names:
+    items:
+      - const: osc
+      - const: hifi4_core
+      - const: stg_axiahb
+      - const: usb_125m
+      - const: cpu_bus
+      - const: hifi4_axi
+      - const: nocstg_bus
+      - const: apb_bus
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+
+    stgcrg: clock-controller@10230000 {
+        compatible = "starfive,jh7110-stgcrg";
+        reg = <0x10230000 0x10000>;
+        clocks = <&osc>,
+                 <&syscrg JH7110_SYSCLK_HIFI4_CORE>,
+                 <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
+                 <&syscrg JH7110_SYSCLK_USB_125M>,
+                 <&syscrg JH7110_SYSCLK_CPU_BUS>,
+                 <&syscrg JH7110_SYSCLK_HIFI4_AXI>,
+                 <&syscrg JH7110_SYSCLK_NOCSTG_BUS>,
+                 <&syscrg JH7110_SYSCLK_APB_BUS>;
+        clock-names = "osc", "hifi4_core",
+                      "stg_axiahb", "usb_125m",
+                      "cpu_bus", "hifi4_axi",
+                      "nocstg_bus", "apb_bus";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/starfive,jh7110-syscrg.yaml b/Bindings/clock/starfive,jh7110-syscrg.yaml
new file mode 100644
index 0000000..5ba0a88
--- /dev/null
+++ b/Bindings/clock/starfive,jh7110-syscrg.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-syscrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 System Clock and Reset Generator
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7110-syscrg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    oneOf:
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC1 RMII reference or GMAC1 RGMII RX
+          - description: External I2S TX bit clock
+          - description: External I2S TX left/right channel clock
+          - description: External I2S RX bit clock
+          - description: External I2S RX left/right channel clock
+          - description: External TDM clock
+          - description: External audio master clock
+          - description: PLL0
+          - description: PLL1
+          - description: PLL2
+
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC1 RMII reference
+          - description: GMAC1 RGMII RX
+          - description: External I2S TX bit clock
+          - description: External I2S TX left/right channel clock
+          - description: External I2S RX bit clock
+          - description: External I2S RX left/right channel clock
+          - description: External TDM clock
+          - description: External audio master clock
+          - description: PLL0
+          - description: PLL1
+          - description: PLL2
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: osc
+          - enum:
+              - gmac1_rmii_refin
+              - gmac1_rgmii_rxin
+          - const: i2stx_bclk_ext
+          - const: i2stx_lrck_ext
+          - const: i2srx_bclk_ext
+          - const: i2srx_lrck_ext
+          - const: tdm_ext
+          - const: mclk_ext
+          - const: pll0_out
+          - const: pll1_out
+          - const: pll2_out
+
+      - items:
+          - const: osc
+          - const: gmac1_rmii_refin
+          - const: gmac1_rgmii_rxin
+          - const: i2stx_bclk_ext
+          - const: i2stx_lrck_ext
+          - const: i2srx_bclk_ext
+          - const: i2srx_lrck_ext
+          - const: tdm_ext
+          - const: mclk_ext
+          - const: pll0_out
+          - const: pll1_out
+          - const: pll2_out
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@13020000 {
+        compatible = "starfive,jh7110-syscrg";
+        reg = <0x13020000 0x10000>;
+        clocks = <&osc>, <&gmac1_rmii_refin>,
+                 <&gmac1_rgmii_rxin>,
+                 <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
+                 <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
+                 <&tdm_ext>, <&mclk_ext>,
+                 <&pllclk 0>, <&pllclk 1>, <&pllclk 2>;
+        clock-names = "osc", "gmac1_rmii_refin",
+                      "gmac1_rgmii_rxin",
+                      "i2stx_bclk_ext", "i2stx_lrck_ext",
+                      "i2srx_bclk_ext", "i2srx_lrck_ext",
+                      "tdm_ext", "mclk_ext",
+                      "pll0_out", "pll1_out", "pll2_out";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/starfive,jh7110-voutcrg.yaml b/Bindings/clock/starfive,jh7110-voutcrg.yaml
new file mode 100644
index 0000000..af77bd8
--- /dev/null
+++ b/Bindings/clock/starfive,jh7110-voutcrg.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-voutcrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 Video-Output Clock and Reset Generator
+
+maintainers:
+  - Xingyu Wu <xingyu.wu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-voutcrg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Vout Top core
+      - description: Vout Top Ahb
+      - description: Vout Top Axi
+      - description: Vout Top HDMI MCLK
+      - description: I2STX0 BCLK
+      - description: external HDMI pixel
+
+  clock-names:
+    items:
+      - const: vout_src
+      - const: vout_top_ahb
+      - const: vout_top_axi
+      - const: vout_top_hdmitx0_mclk
+      - const: i2stx0_bclk
+      - const: hdmitx0_pixelclk
+
+  resets:
+    maxItems: 1
+    description: Vout Top core
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+  power-domains:
+    maxItems: 1
+    description:
+      Vout domain power
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - '#clock-cells'
+  - '#reset-cells'
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+    #include <dt-bindings/power/starfive,jh7110-pmu.h>
+    #include <dt-bindings/reset/starfive,jh7110-crg.h>
+
+    voutcrg: clock-controller@295C0000 {
+        compatible = "starfive,jh7110-voutcrg";
+        reg = <0x295C0000 0x10000>;
+        clocks = <&syscrg JH7110_SYSCLK_VOUT_SRC>,
+                 <&syscrg JH7110_SYSCLK_VOUT_TOP_AHB>,
+                 <&syscrg JH7110_SYSCLK_VOUT_TOP_AXI>,
+                 <&syscrg JH7110_SYSCLK_VOUT_TOP_HDMITX0_MCLK>,
+                 <&syscrg JH7110_SYSCLK_I2STX0_BCLK>,
+                 <&hdmitx0_pixelclk>;
+        clock-names = "vout_src", "vout_top_ahb",
+                      "vout_top_axi", "vout_top_hdmitx0_mclk",
+                      "i2stx0_bclk", "hdmitx0_pixelclk";
+        resets = <&syscrg JH7110_SYSRST_VOUT_TOP_SRC>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        power-domains = <&pwrc JH7110_PD_VOUT>;
+    };
diff --git a/Bindings/clock/stericsson,abx500.txt b/Bindings/clock/stericsson,abx500.txt
new file mode 100644
index 0000000..dbaa886
--- /dev/null
+++ b/Bindings/clock/stericsson,abx500.txt
@@ -0,0 +1,20 @@
+Clock bindings for ST-Ericsson ABx500 clocks
+
+Required properties :
+- compatible : shall contain the following:
+  "stericsson,ab8500-clk"
+- #clock-cells should be <1>
+
+The ABx500 clocks need to be placed as a subnode of an AB8500
+device node, see mfd/ab8500.txt
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/ste-ab8500.h header and can be used in device
+tree sources.
+
+Example:
+
+clock-controller {
+	compatible = "stericsson,ab8500-clk";
+	#clock-cells = <1>;
+};
diff --git a/Bindings/clock/stericsson,u8500-clks.yaml b/Bindings/clock/stericsson,u8500-clks.yaml
new file mode 100644
index 0000000..2150307
--- /dev/null
+++ b/Bindings/clock/stericsson,u8500-clks.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/stericsson,u8500-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson DB8500 (U8500) clocks
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: While named "U8500 clocks" these clocks are inside the
+  DB8500 digital baseband system-on-chip and its siblings such as
+  DB8520. These bindings consider the clocks present in the SoC
+  itself, not off-chip clocks. There are four different on-chip
+  clocks - RTC (32 kHz), CPU clock (SMP TWD), PRCMU (power reset and
+  control management unit) clocks and PRCC (peripheral reset and
+  clock controller) clocks. For some reason PRCC 4 does not exist so
+  the itemization can be a bit unintuitive.
+
+properties:
+  compatible:
+    enum:
+      - stericsson,u8500-clks
+      - stericsson,u8540-clks
+      - stericsson,u9540-clks
+
+  reg:
+    items:
+      - description: PRCC 1 register area
+      - description: PRCC 2 register area
+      - description: PRCC 3 register area
+      - description: PRCC 5 register area
+      - description: PRCC 6 register area
+
+  prcmu-clock:
+    description: A subnode with one clock cell for PRCMU (power, reset, control
+      management unit) clocks. The cell indicates which PRCMU clock in the
+      prcmu-clock node the consumer wants to use.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 1
+
+    additionalProperties: false
+
+  prcc-periph-clock:
+    description: A subnode with two clock cells for PRCC (peripheral
+      reset and clock controller) peripheral clocks. The first cell indicates
+      which PRCC block the consumer wants to use, possible values are 1, 2, 3,
+      5, 6. The second cell indicates which clock inside the PRCC block it
+      wants, possible values are 0 thru 31.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 2
+
+    additionalProperties: false
+
+  prcc-kernel-clock:
+    description: A subnode with two clock cells for PRCC (peripheral reset
+      and clock controller) kernel clocks. The first cell indicates which PRCC
+      block the consumer wants to use, possible values are 1, 2, 3, 5, 6. The
+      second cell indicates which clock inside the PRCC block it wants, possible
+      values are 0 thru 31.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 2
+
+    additionalProperties: false
+
+  prcc-reset-controller:
+    description: A subnode with two reset cells for the reset portions of the
+      PRCC (peripheral reset and clock controller). The first cell indicates
+      which PRCC block the consumer wants to use, possible values are 1, 2, 3
+      5 and 6. The second cell indicates which reset line inside the PRCC block
+      it wants to control, possible values are 0 thru 31.
+    type: object
+
+    properties:
+      '#reset-cells':
+        const: 2
+
+    additionalProperties: false
+
+  rtc32k-clock:
+    description: A subnode with zero clock cells for the 32kHz RTC clock.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 0
+
+    additionalProperties: false
+
+  smp-twd-clock:
+    description: A subnode for the ARM SMP Timer Watchdog cluster with zero
+      clock cells.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 0
+
+    additionalProperties: false
+
+  clkout-clock:
+    description: A subnode with three clock cells for externally routed clocks,
+      output clocks. These are two PRCMU-internal clocks that can be divided and
+      muxed out on the pads of the DB8500 SoC.
+    type: object
+
+    properties:
+      '#clock-cells':
+        description:
+          The first cell indicates which output clock we are using,
+          possible values are 0 (CLKOUT1) and 1 (CLKOUT2).
+          The second cell indicates which clock we want to use as source,
+          possible values are 0 thru 7, see the defines for the different
+          source clocks.
+          The third cell is a divider, legal values are 1 thru 63.
+        const: 3
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - prcmu-clock
+  - prcc-periph-clock
+  - prcc-kernel-clock
+  - rtc32k-clock
+  - smp-twd-clock
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ste-db8500-clkout.h>
+    clocks@8012 {
+      compatible = "stericsson,u8500-clks";
+      reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
+            <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
+            <0xa03cf000 0x1000>;
+
+      prcmu_clk: prcmu-clock {
+        #clock-cells = <1>;
+      };
+
+      prcc_pclk: prcc-periph-clock {
+        #clock-cells = <2>;
+      };
+
+      prcc_kclk: prcc-kernel-clock {
+        #clock-cells = <2>;
+      };
+
+      prcc_reset: prcc-reset-controller {
+        #reset-cells = <2>;
+      };
+
+      rtc_clk: rtc32k-clock {
+        #clock-cells = <0>;
+      };
+
+      smp_twd_clk: smp-twd-clock {
+        #clock-cells = <0>;
+      };
+
+      clkout_clk: clkout-clock {
+        #clock-cells = <3>;
+      };
+    };
diff --git a/Bindings/clock/sunplus,sp7021-clkc.yaml b/Bindings/clock/sunplus,sp7021-clkc.yaml
new file mode 100644
index 0000000..bcc1408
--- /dev/null
+++ b/Bindings/clock/sunplus,sp7021-clkc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sunplus,sp7021-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Clock Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-clkc
+
+  reg:
+    maxItems: 3
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    extclk: osc0 {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <27000000>;
+      clock-output-names = "extclk";
+    };
+
+    clkc: clock-controller@9c000004 {
+      compatible = "sunplus,sp7021-clkc";
+      reg = <0x9c000004 0x28>,
+            <0x9c000200 0x44>,
+            <0x9c000268 0x08>;
+      clocks = <&extclk>;
+      #clock-cells = <1>;
+    };
+
+...
diff --git a/Bindings/clock/tesla,fsd-clock.yaml b/Bindings/clock/tesla,fsd-clock.yaml
new file mode 100644
index 0000000..dc808e2
--- /dev/null
+++ b/Bindings/clock/tesla,fsd-clock.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/tesla,fsd-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tesla FSD (Full Self-Driving) SoC clock controller
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+  - linux-fsd@tesla.com
+
+description: |
+  FSD clock controller consist of several clock management unit
+  (CMU), which generates clocks for various inteernal SoC blocks.
+  The root clock comes from external OSC clock (24 MHz).
+
+  All available clocks are defined as preprocessor macros in
+  'dt-bindings/clock/fsd-clk.h' header.
+
+properties:
+  compatible:
+    enum:
+      - tesla,fsd-clock-cmu
+      - tesla,fsd-clock-imem
+      - tesla,fsd-clock-peric
+      - tesla,fsd-clock-fsys0
+      - tesla,fsd-clock-fsys1
+      - tesla,fsd-clock-mfc
+      - tesla,fsd-clock-cam_csi
+
+  clocks:
+    minItems: 1
+    maxItems: 6
+
+  clock-names:
+    minItems: 1
+    maxItems: 6
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-cmu
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-imem
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: IMEM TCU clock (from CMU_CMU)
+            - description: IMEM bus clock (from CMU_CMU)
+            - description: IMEM DMA clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_imem_tcuclk
+            - const: dout_cmu_imem_aclk
+            - const: dout_cmu_imem_dmaclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-peric
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: Shared0 PLL div4 clock (from CMU_CMU)
+            - description: PERIC shared1 div36 clock (from CMU_CMU)
+            - description: PERIC shared0 div3 TBU clock (from CMU_CMU)
+            - description: PERIC shared0 div20 clock (from CMU_CMU)
+            - description: PERIC shared1 div4 DMAclock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_pll_shared0_div4
+            - const: dout_cmu_peric_shared1div36
+            - const: dout_cmu_peric_shared0div3_tbuclk
+            - const: dout_cmu_peric_shared0div20
+            - const: dout_cmu_peric_shared1div4_dmaclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-fsys0
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: Shared0 PLL div6 clock (from CMU_CMU)
+            - description: FSYS0 shared1 div4 clock (from CMU_CMU)
+            - description: FSYS0 shared0 div4 clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_pll_shared0_div6
+            - const: dout_cmu_fsys0_shared1div4
+            - const: dout_cmu_fsys0_shared0div4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-fsys1
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: FSYS1 shared0 div8 clock (from CMU_CMU)
+            - description: FSYS1 shared0 div4 clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_fsys1_shared0div8
+            - const: dout_cmu_fsys1_shared0div4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-mfc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-cam_csi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_FSYS1
+  - |
+    #include <dt-bindings/clock/fsd-clk.h>
+
+    clock_fsys1: clock-controller@16810000 {
+          compatible = "tesla,fsd-clock-fsys1";
+          reg = <0x16810000 0x3000>;
+          #clock-cells = <1>;
+
+          clocks = <&fin_pll>,
+                   <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV8>,
+                   <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV4>;
+          clock-names = "fin_pll",
+                        "dout_cmu_fsys1_shared0div8",
+                        "dout_cmu_fsys1_shared0div4";
+    };
+
+...
diff --git a/Bindings/clock/ti,am62-audio-refclk.yaml b/Bindings/clock/ti,am62-audio-refclk.yaml
new file mode 100644
index 0000000..b2e40bd
--- /dev/null
+++ b/Bindings/clock/ti,am62-audio-refclk.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,am62-audio-refclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Audio Reference Clock
+
+maintainers:
+  - Jai Luthra <j-luthra@ti.com>
+
+properties:
+  compatible:
+    items:
+      - const: ti,am62-audio-refclk
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    audio_refclk0: clock@82e0 {
+        compatible = "ti,am62-audio-refclk";
+        reg = <0x82e0 0x4>;
+        clocks = <&k3_clks 157 0>;
+        assigned-clocks = <&k3_clks 157 0>;
+        assigned-clock-parents = <&k3_clks 157 8>;
+        #clock-cells = <0>;
+    };
diff --git a/Bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Bindings/clock/ti,am654-ehrpwm-tbclk.yaml
new file mode 100644
index 0000000..64b8bce
--- /dev/null
+++ b/Bindings/clock/ti,am654-ehrpwm-tbclk.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,am654-ehrpwm-tbclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI EHRPWM Time Base Clock
+
+maintainers:
+  - Vignesh Raghavendra <vigneshr@ti.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,am654-ehrpwm-tbclk
+          - ti,am64-epwm-tbclk
+          - ti,am62-epwm-tbclk
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ehrpwm_tbclk: clock@4140 {
+        compatible = "ti,am654-ehrpwm-tbclk";
+        reg = <0x4140 0x18>;
+        #clock-cells = <1>;
+    };
diff --git a/Bindings/clock/ti,cdce706.txt b/Bindings/clock/ti,cdce706.txt
new file mode 100644
index 0000000..21c3ff7
--- /dev/null
+++ b/Bindings/clock/ti,cdce706.txt
@@ -0,0 +1,42 @@
+Bindings for Texas Instruments CDCE706 programmable 3-PLL clock
+synthesizer/multiplier/divider.
+
+Reference: https://www.ti.com/lit/ds/symlink/cdce706.pdf
+
+I2C device node required properties:
+- compatible: shall be "ti,cdce706".
+- reg: i2c device address, shall be in range [0x68...0x6b].
+- #clock-cells: from common clock binding; shall be set to 1.
+- clocks: from common clock binding; list of parent clock
+  handles, shall be reference clock(s) connected to CLK_IN0
+  and CLK_IN1 pins.
+- clock-names: shall be clk_in0 and/or clk_in1. Use clk_in0
+  in case of crystal oscillator or differential signal input
+  configuration. Use clk_in0 and clk_in1 in case of independent
+  single-ended LVCMOS inputs configuration.
+
+Example:
+
+	clocks {
+		clk54: clk54 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <54000000>;
+		};
+	};
+	...
+	i2c0: i2c-master@d090000 {
+		...
+		cdce706: clock-synth@69 {
+			compatible = "ti,cdce706";
+			#clock-cells = <1>;
+			reg = <0x69>;
+			clocks = <&clk54>;
+			clock-names = "clk_in0";
+		};
+	};
+	...
+	simple-audio-card,codec {
+		...
+		clocks = <&cdce706 4>;
+	};
diff --git a/Bindings/clock/ti,cdce925.yaml b/Bindings/clock/ti,cdce925.yaml
new file mode 100644
index 0000000..95c1c6f
--- /dev/null
+++ b/Bindings/clock/ti,cdce925.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,cdce925.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI CDCE913/925/937/949 programmable I2C clock synthesizers
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+description: |
+  Flexible Low Power LVCMOS Clock Generator with SSC Support for EMI Reduction
+
+  - CDCE(L)913: 1-PLL, 3 Outputs https://www.ti.com/product/cdce913
+  - CDCE(L)925: 2-PLL, 5 Outputs https://www.ti.com/product/cdce925
+  - CDCE(L)937: 3-PLL, 7 Outputs https://www.ti.com/product/cdce937
+  - CDCE(L)949: 4-PLL, 9 Outputs https://www.ti.com/product/cdce949
+
+properties:
+  compatible:
+    enum:
+      - ti,cdce913
+      - ti,cdce925
+      - ti,cdce937
+      - ti,cdce949
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: fixed parent clock
+
+  "#clock-cells":
+    const: 1
+
+  vdd-supply:
+    description: Regulator that provides 1.8V Vdd power supply
+
+  vddout-supply:
+    description: |
+      Regulator that provides Vddout power supply.
+      non-L variant: 2.5V or 3.3V for
+      L variant: 1.8V for
+
+  xtal-load-pf:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Crystal load-capacitor value to fine-tune performance on a
+      board, or to compensate for external influences.
+
+patternProperties:
+  "^PLL[1-4]$":
+    type: object
+    description: |
+      optional child node can be used to specify spread
+      spectrum clocking parameters for a board
+
+    additionalProperties: false
+
+    properties:
+      spread-spectrum:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: SSC mode as defined in the data sheet
+
+      spread-spectrum-center:
+        type: boolean
+        description: |
+          Use "centered" mode instead of "max" mode. When
+          present, the clock runs at the requested frequency on average.
+          Otherwise the requested frequency is the maximum value of the
+          SCC range.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cdce925: clock-controller@64 {
+            compatible = "ti,cdce925";
+            reg = <0x64>;
+            clocks = <&xtal_27Mhz>;
+            #clock-cells = <1>;
+            xtal-load-pf = <5>;
+            vdd-supply = <&reg_1v8>;
+            vddout-supply = <&reg_3v3>;
+            /* PLL options to get SSC 1% centered */
+            PLL2 {
+                spread-spectrum = <4>;
+                spread-spectrum-center;
+            };
+        };
+    };
diff --git a/Bindings/clock/ti,lmk04832.yaml b/Bindings/clock/ti,lmk04832.yaml
new file mode 100644
index 0000000..13d7b3d
--- /dev/null
+++ b/Bindings/clock/ti,lmk04832.yaml
@@ -0,0 +1,209 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,lmk04832.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LMK04832 Clock Controller
+
+maintainers:
+  - Liam Beguin <liambeguin@gmail.com>
+
+description: |
+  Devicetree binding for the LMK04832, a clock conditioner with JEDEC JESD204B
+  support. The LMK04832 is pin compatible with the LMK0482x family.
+
+  Link to datasheet, https://www.ti.com/lit/ds/symlink/lmk04832.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,lmk04832
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#clock-cells':
+    const: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  clocks:
+    items:
+      - description: PLL2 reference clock.
+
+  clock-names:
+    items:
+      - const: oscin
+
+  reset-gpios:
+    maxItems: 1
+
+  ti,spi-4wire-rdbk:
+    description: |
+      Select SPI 4wire readback pin configuration.
+      Available readback pins are,
+        CLKin_SEL0 0
+        CLKin_SEL1 1
+        RESET 2
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    default: 1
+
+  ti,vco-hz:
+    description: Optional to set VCO frequency of the PLL in Hertz.
+
+  ti,sysref-ddly:
+    description: SYSREF digital delay value.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 8
+    maximum: 8191
+    default: 8
+
+  ti,sysref-mux:
+    description: |
+      SYSREF Mux configuration.
+      Available options are,
+        Normal SYNC 0
+        Re-clocked 1
+        SYSREF Pulser 2
+        SYSREF Continuous 3
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 3
+
+  ti,sync-mode:
+    description: SYNC pin configuration.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    default: 1
+
+  ti,sysref-pulse-count:
+    description:
+      Number of SYSREF pulses to send when SYSREF is not in continuous mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+    default: 4
+
+patternProperties:
+  "@[0-9a-d]+$":
+    type: object
+    description:
+      Child nodes used to configure output clocks.
+
+    properties:
+      reg:
+        description:
+          clock output identifier.
+        minimum: 0
+        maximum: 13
+
+      ti,clkout-fmt:
+        description:
+          Clock output format.
+          Available options are,
+            Powerdown 0x00
+            LVDS 0x01
+            HSDS 6 mA 0x02
+            HSDS 8 mA 0x03
+            LVPECL 1600 mV 0x04
+            LVPECL 2000 mV 0x05
+            LCPECL 0x06
+            CML 16 mA 0x07
+            CML 24 mA 0x08
+            CML 32 mA 0x09
+            CMOS (Off/Inverted) 0x0a
+            CMOS (Normal/Off) 0x0b
+            CMOS (Inverted/Inverted) 0x0c
+            CMOS (Inverted/Normal) 0x0d
+            CMOS (Normal/Inverted) 0x0e
+            CMOS (Normal/Normal) 0x0f
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+
+      ti,clkout-sysref:
+        description:
+          Select SYSREF clock path for output clock.
+        type: boolean
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clocks {
+        lmk04832_oscin: oscin {
+            compatible = "fixed-clock";
+
+            #clock-cells = <0>;
+            clock-frequency = <122880000>;
+            clock-output-names = "lmk04832-oscin";
+        };
+    };
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lmk04832: clock-controller@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reg = <0>;
+
+            compatible = "ti,lmk04832";
+            spi-max-frequency = <781250>;
+
+            reset-gpios = <&gpio_lmk 0 0 0>;
+
+            #clock-cells = <1>;
+            clocks = <&lmk04832_oscin>;
+            clock-names = "oscin";
+
+            ti,spi-4wire-rdbk = <0>;
+            ti,vco-hz = <2457600000>;
+
+            assigned-clocks =
+                <&lmk04832 0>, <&lmk04832 1>,
+                <&lmk04832 2>, <&lmk04832 3>,
+                <&lmk04832 4>,
+                <&lmk04832 6>, <&lmk04832 7>,
+                <&lmk04832 10>, <&lmk04832 11>;
+            assigned-clock-rates =
+                <122880000>, <384000>,
+                <122880000>, <384000>,
+                <122880000>,
+                <153600000>, <384000>,
+                <614400000>, <384000>;
+
+            clkout0@0 {
+                reg = <0>;
+                ti,clkout-fmt = <0x01>; // LVDS
+            };
+
+            clkout1@1 {
+                reg = <1>;
+                ti,clkout-fmt = <0x01>; // LVDS
+                ti,clkout-sysref;
+            };
+        };
+    };
diff --git a/Bindings/clock/ti,sci-clk.yaml b/Bindings/clock/ti,sci-clk.yaml
new file mode 100644
index 0000000..0a9d6a4
--- /dev/null
+++ b/Bindings/clock/ti,sci-clk.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,sci-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-SCI clock controller
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Some TI SoCs contain a system controller (like the Power Management Micro
+  Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
+  the state of the various hardware modules present on the SoC. Communication
+  between the host processor running an OS and the system controller happens
+  through a protocol called TI System Control Interface (TI-SCI protocol).
+
+  This clock controller node uses the TI SCI protocol to perform various clock
+  management of various hardware modules (devices) present on the SoC. This
+  node must be a child node of the associated TI-SCI system controller node.
+
+properties:
+  $nodename:
+    pattern: "^clock-controller$"
+
+  compatible:
+    const: ti,k2g-sci-clk
+
+  "#clock-cells":
+    const: 2
+    description:
+      The two cells represent values that the TI-SCI controller defines.
+
+      The first cell should contain the device ID.
+
+      The second cell should contain the clock ID.
+
+      Please see  http://processors.wiki.ti.com/index.php/TISCI for
+      protocol documentation for the values to be used for different devices.
+
+additionalProperties: false
+
+examples:
+  - |
+    k3_clks: clock-controller {
+        compatible = "ti,k2g-sci-clk";
+        #clock-cells = <2>;
+    };
diff --git a/Bindings/clock/ti-clkctrl.txt b/Bindings/clock/ti-clkctrl.txt
new file mode 100644
index 0000000..d20db79
--- /dev/null
+++ b/Bindings/clock/ti-clkctrl.txt
@@ -0,0 +1,63 @@
+Texas Instruments clkctrl clock binding
+
+Texas Instruments SoCs can have a clkctrl clock controller for each
+interconnect target module. The clkctrl clock controller manages functional
+and interface clocks for each module. Each clkctrl controller can also
+gate one or more optional functional clocks for a module, and can have one
+or more clock muxes. There is a clkctrl clock controller typically for each
+interconnect target module on omap4 and later variants.
+
+The clock consumers can specify the index of the clkctrl clock using
+the hardware offset from the clkctrl instance register space. The optional
+clocks can be specified by clkctrl hardware offset and the index of the
+optional clock.
+
+For more information, please see the Linux clock framework binding at
+Documentation/devicetree/bindings/clock/clock-bindings.txt.
+
+Required properties :
+- compatible : shall be "ti,clkctrl" or a clock domain specific name:
+	       "ti,clkctrl-l4-cfg"
+	       "ti,clkctrl-l4-per"
+	       "ti,clkctrl-l4-secure"
+	       "ti,clkctrl-l4-wkup"
+- clock-output-names : from common clock binding
+- #clock-cells : shall contain 2 with the first entry being the instance
+		 offset from the clock domain base and the second being the
+		 clock index
+- reg : clock registers
+
+Example: Clock controller node on omap 4430:
+
+&cm2 {
+	l4per: cm@1400 {
+		cm_l4per@0 {
+			cm_l4per_clkctrl: clock@20 {
+				compatible = "ti,clkctrl";
+				clock-output-names = "l4_per";
+				reg = <0x20 0x1b0>;
+				#clock-cells = <2>;
+			};
+		};
+	};
+};
+
+Example: Preprocessor helper macros in dt-bindings/clock/ti-clkctrl.h
+
+#define OMAP4_CLKCTRL_OFFSET		0x20
+#define OMAP4_CLKCTRL_INDEX(offset)	((offset) - OMAP4_CLKCTRL_OFFSET)
+#define MODULEMODE_HWCTRL		1
+#define MODULEMODE_SWCTRL		2
+
+#define OMAP4_GPTIMER10_CLKTRL		OMAP4_CLKCTRL_INDEX(0x28)
+#define OMAP4_GPTIMER11_CLKTRL		OMAP4_CLKCTRL_INDEX(0x30)
+#define OMAP4_GPTIMER2_CLKTRL		OMAP4_CLKCTRL_INDEX(0x38)
+...
+#define OMAP4_GPIO2_CLKCTRL		OMAP_CLKCTRL_INDEX(0x60)
+
+Example: Clock consumer node for GPIO2:
+
+&gpio2 {
+       clocks = <&cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 0
+		 &cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 8>;
+};
diff --git a/Bindings/clock/ti-keystone-pllctrl.txt b/Bindings/clock/ti-keystone-pllctrl.txt
new file mode 100644
index 0000000..c35cb6c
--- /dev/null
+++ b/Bindings/clock/ti-keystone-pllctrl.txt
@@ -0,0 +1,20 @@
+* Device tree bindings for Texas Instruments keystone pll controller
+
+The main pll controller used to drive theC66x CorePacs, the switch fabric,
+and a majority of the peripheral clocks (all but the ARM CorePacs, DDR3 and
+the NETCP modules) requires a PLL Controller to manage the various clock
+divisions, gating, and synchronization.
+
+Required properties:
+
+- compatible:		"ti,keystone-pllctrl", "syscon"
+
+- reg:			contains offset/length value for pll controller
+			registers space.
+
+Example:
+
+pllctrl: pll-controller@02310000 {
+	compatible = "ti,keystone-pllctrl", "syscon";
+	reg = <0x02310000 0x200>;
+};
diff --git a/Bindings/clock/ti/adpll.txt b/Bindings/clock/ti/adpll.txt
new file mode 100644
index 0000000..4c8a2ce
--- /dev/null
+++ b/Bindings/clock/ti/adpll.txt
@@ -0,0 +1,41 @@
+Binding for Texas Instruments ADPLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped ADPLL with two to three selectable input clocks
+and three to four children.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of "ti,dm814-adpll-s-clock" or
+  "ti,dm814-adpll-lj-clock" depending on the type of the ADPLL
+- #clock-cells : from common clock binding; shall be set to 1.
+- clocks : link phandles of parent clocks clkinp and clkinpulow, note
+  that the adpll-s-clock also has an optional clkinphif
+- reg : address and length of the register set for controlling the ADPLL.
+
+Examples:
+	adpll_mpu_ck: adpll@40 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-s-clock";
+		reg = <0x40 0x40>;
+		clocks = <&devosc_ck &devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow", "clkinphif";
+		clock-output-names = "481c5040.adpll.dcoclkldo",
+				     "481c5040.adpll.clkout",
+				     "481c5040.adpll.clkoutx2",
+				     "481c5040.adpll.clkouthif";
+	};
+
+	adpll_dsp_ck: adpll@80 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x80 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5080.adpll.dcoclkldo",
+				     "481c5080.adpll.clkout",
+				     "481c5080.adpll.clkoutldo";
+	};
diff --git a/Bindings/clock/ti/apll.txt b/Bindings/clock/ti/apll.txt
new file mode 100644
index 0000000..ade4dd4
--- /dev/null
+++ b/Bindings/clock/ti/apll.txt
@@ -0,0 +1,45 @@
+Binding for Texas Instruments APLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped APLL with usually two selectable input clocks
+(reference clock and bypass clock), with analog phase locked
+loop logic for multiplying the input clock to a desired output
+clock. This clock also typically supports different operation
+modes (locked, low power stop etc.) APLL mostly behaves like
+a subtype of a DPLL [2], although a simplified one at that.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/dpll.txt
+
+Required properties:
+- compatible : shall be "ti,dra7-apll-clock" or "ti,omap2-apll-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks (clk-ref and clk-bypass)
+- reg : address and length of the register set for controlling the APLL.
+  It contains the information of registers in the following order:
+	"control" - contains the control register offset
+	"idlest" - contains the idlest register offset
+	"autoidle" - contains the autoidle register offset (OMAP2 only)
+- ti,clock-frequency : static clock frequency for the clock (OMAP2 only)
+- ti,idlest-shift : bit-shift for the idlest field (OMAP2 only)
+- ti,bit-shift : bit-shift for enable and autoidle fields (OMAP2 only)
+
+Examples:
+	apll_pcie_ck: apll_pcie_ck {
+		#clock-cells = <0>;
+		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
+		reg = <0x021c>, <0x0220>;
+		compatible = "ti,dra7-apll-clock";
+	};
+
+	apll96_ck: apll96_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-apll-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <2>;
+		ti,idlest-shift = <8>;
+		ti,clock-frequency = <96000000>;
+		reg = <0x0500>, <0x0530>, <0x0520>;
+	};
diff --git a/Bindings/clock/ti/autoidle.txt b/Bindings/clock/ti/autoidle.txt
new file mode 100644
index 0000000..7c735dd
--- /dev/null
+++ b/Bindings/clock/ti/autoidle.txt
@@ -0,0 +1,39 @@
+Binding for Texas Instruments autoidle clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a register mapped
+clock which can be put to idle automatically by hardware based on the usage
+and a configuration bit setting. Autoidle clock is never an individual
+clock, it is always a derivative of some basic clock like a gate, divider,
+or fixed-factor.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- reg : offset for the register controlling the autoidle
+- ti,autoidle-shift : bit shift of the autoidle enable bit
+- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0
+
+Examples:
+	dpll_core_m4_ck: dpll_core_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d38>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b4>;
+		ti,clock-mult = <1>;
+		ti,invert-autoidle-bit;
+	};
diff --git a/Bindings/clock/ti/clockdomain.txt b/Bindings/clock/ti/clockdomain.txt
new file mode 100644
index 0000000..9c61992
--- /dev/null
+++ b/Bindings/clock/ti/clockdomain.txt
@@ -0,0 +1,27 @@
+Binding for Texas Instruments clockdomain.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1] in consumer role.
+Every clock on TI SoC belongs to one clockdomain, but software
+only needs this information for specific clocks which require
+their parent clockdomain to be controlled when the clock is
+enabled/disabled. This binding doesn't define a new clock
+binding type, it is used to group existing clock nodes under
+hardware hierarchy.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,clockdomain"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of clocks within this domain
+
+Optional properties:
+- clock-output-names : from common clock binding.
+
+Examples:
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
+	};
diff --git a/Bindings/clock/ti/composite.txt b/Bindings/clock/ti/composite.txt
new file mode 100644
index 0000000..33ac7c9
--- /dev/null
+++ b/Bindings/clock/ti/composite.txt
@@ -0,0 +1,57 @@
+Binding for TI composite clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped composite clock with multiple different sub-types;
+
+a multiplexer clock with multiple input clock signals or parents, one
+of which can be selected as output, this behaves exactly as [2]
+
+an adjustable clock rate divider, this behaves exactly as [3]
+
+a gating function which can be used to enable and disable the output
+clock, this behaves exactly as [4]
+
+The binding must provide a list of the component clocks that shall be
+merged to this clock. The component clocks shall be of one of the
+"ti,*composite*-clock" types.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/mux.txt
+[3] Documentation/devicetree/bindings/clock/ti/divider.txt
+[4] Documentation/devicetree/bindings/clock/ti/gate.txt
+
+Required properties:
+- compatible : shall be: "ti,composite-clock"
+- clocks : link phandles of component clocks
+- #clock-cells : from common clock binding; shall be set to 0.
+
+Optional properties:
+- clock-output-names : from common clock binding.
+
+Examples:
+
+usb_l4_gate_ick: usb_l4_gate_ick {
+	#clock-cells = <0>;
+	compatible = "ti,composite-interface-clock";
+	clocks = <&l4_ick>;
+	ti,bit-shift = <5>;
+	reg = <0x0a10>;
+};
+
+usb_l4_div_ick: usb_l4_div_ick {
+	#clock-cells = <0>;
+	compatible = "ti,composite-divider-clock";
+	clocks = <&l4_ick>;
+	ti,bit-shift = <4>;
+	ti,max-div = <1>;
+	reg = <0x0a40>;
+	ti,index-starts-at-one;
+};
+
+usb_l4_ick: usb_l4_ick {
+	#clock-cells = <0>;
+	compatible = "ti,composite-clock";
+	clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+};
diff --git a/Bindings/clock/ti/davinci/da8xx-cfgchip.txt b/Bindings/clock/ti/davinci/da8xx-cfgchip.txt
new file mode 100644
index 0000000..1e03dce
--- /dev/null
+++ b/Bindings/clock/ti/davinci/da8xx-cfgchip.txt
@@ -0,0 +1,93 @@
+Binding for TI DA8XX/OMAP-L13X/AM17XX/AM18XX CFGCHIP clocks
+
+TI DA8XX/OMAP-L13X/AM17XX/AM18XX SoCs contain a general purpose set of
+registers call CFGCHIPn. Some of these registers function as clock
+gates. This document describes the bindings for those clocks.
+
+All of the clock nodes described below must be child nodes of a CFGCHIP node
+(compatible = "ti,da830-cfgchip").
+
+USB PHY clocks
+--------------
+Required properties:
+- compatible: shall be "ti,da830-usb-phy-clocks".
+- #clock-cells: from common clock binding; shall be set to 1.
+- clocks: phandles to the parent clocks corresponding to clock-names
+- clock-names: shall be "fck", "usb_refclkin", "auxclk"
+
+This node provides two clocks. The clock at index 0 is the USB 2.0 PHY 48MHz
+clock and the clock at index 1 is the USB 1.1 PHY 48MHz clock.
+
+eHRPWM Time Base Clock (TBCLK)
+------------------------------
+Required properties:
+- compatible: shall be "ti,da830-tbclksync".
+- #clock-cells: from common clock binding; shall be set to 0.
+- clocks: phandle to the parent clock
+- clock-names: shall be "fck"
+
+PLL DIV4.5 divider
+------------------
+Required properties:
+- compatible: shall be "ti,da830-div4p5ena".
+- #clock-cells: from common clock binding; shall be set to 0.
+- clocks: phandle to the parent clock
+- clock-names: shall be "pll0_pllout"
+
+EMIFA clock source (ASYNC1)
+---------------------------
+Required properties:
+- compatible: shall be "ti,da850-async1-clksrc".
+- #clock-cells: from common clock binding; shall be set to 0.
+- clocks: phandles to the parent clocks corresponding to clock-names
+- clock-names: shall be "pll0_sysclk3", "div4.5"
+
+ASYNC3 clock source
+-------------------
+Required properties:
+- compatible: shall be "ti,da850-async3-clksrc".
+- #clock-cells: from common clock binding; shall be set to 0.
+- clocks: phandles to the parent clocks corresponding to clock-names
+- clock-names: shall be "pll0_sysclk2", "pll1_sysclk2"
+
+Examples:
+
+	cfgchip: syscon@1417c {
+		compatible = "ti,da830-cfgchip", "syscon", "simple-mfd";
+		reg = <0x1417c 0x14>;
+
+		usb_phy_clk: usb-phy-clocks {
+			compatible = "ti,da830-usb-phy-clocks";
+			#clock-cells = <1>;
+			clocks = <&psc1 1>, <&usb_refclkin>, <&pll0_auxclk>;
+			clock-names = "fck", "usb_refclkin", "auxclk";
+		};
+		ehrpwm_tbclk: ehrpwm_tbclk {
+			compatible = "ti,da830-tbclksync";
+			#clock-cells = <0>;
+			clocks = <&psc1 17>;
+			clock-names = "fck";
+		};
+		div4p5_clk: div4.5 {
+			compatible = "ti,da830-div4p5ena";
+			#clock-cells = <0>;
+			clocks = <&pll0_pllout>;
+			clock-names = "pll0_pllout";
+		};
+		async1_clk: async1 {
+			compatible = "ti,da850-async1-clksrc";
+			#clock-cells = <0>;
+			clocks = <&pll0_sysclk 3>, <&div4p5_clk>;
+			clock-names = "pll0_sysclk3", "div4.5";
+		};
+		async3_clk: async3 {
+			compatible = "ti,da850-async3-clksrc";
+			#clock-cells = <0>;
+			clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>;
+			clock-names = "pll0_sysclk2", "pll1_sysclk2";
+		};
+	};
+
+Also see:
+- Documentation/devicetree/bindings/clock/clock-bindings.txt
+
diff --git a/Bindings/clock/ti/davinci/pll.txt b/Bindings/clock/ti/davinci/pll.txt
new file mode 100644
index 0000000..c989453
--- /dev/null
+++ b/Bindings/clock/ti/davinci/pll.txt
@@ -0,0 +1,96 @@
+Binding for TI DaVinci PLL Controllers
+
+The PLL provides clocks to most of the components on the SoC. In addition
+to the PLL itself, this controller also contains bypasses, gates, dividers,
+an multiplexers for various clock signals.
+
+Required properties:
+- compatible: shall be one of:
+	- "ti,da850-pll0" for PLL0 on DA850/OMAP-L138/AM18XX
+	- "ti,da850-pll1" for PLL1 on DA850/OMAP-L138/AM18XX
+- reg: physical base address and size of the controller's register area.
+- clocks: phandles corresponding to the clock names
+- clock-names: names of the clock sources - depends on compatible string
+	- for "ti,da850-pll0", shall be "clksrc", "extclksrc"
+	- for "ti,da850-pll1", shall be "clksrc"
+
+Optional properties:
+- ti,clkmode-square-wave: Indicates that the board is supplying a square
+	wave input on the OSCIN pin instead of using a crystal oscillator.
+	This property is only valid when compatible = "ti,da850-pll0".
+
+
+Optional child nodes:
+
+pllout
+	Describes the main PLL clock output (before POSTDIV). The node name must
+	be "pllout".
+
+	Required properties:
+	- #clock-cells: shall be 0
+
+sysclk
+	Describes the PLLDIVn divider clocks that provide the SYSCLKn clock
+	domains. The node name must be "sysclk". Consumers of this node should
+	use "n" in "SYSCLKn" as the index parameter for the clock cell.
+
+	Required properties:
+	- #clock-cells: shall be 1
+
+auxclk
+	Describes the AUXCLK output of the PLL. The node name must be "auxclk".
+	This child node is only valid when compatible = "ti,da850-pll0".
+
+	Required properties:
+	- #clock-cells: shall be 0
+
+obsclk
+	Describes the OBSCLK output of the PLL. The node name must be "obsclk".
+
+	Required properties:
+	- #clock-cells: shall be 0
+
+
+Examples:
+
+	pll0: clock-controller@11000 {
+		compatible = "ti,da850-pll0";
+		reg = <0x11000 0x1000>;
+		clocks = <&ref_clk>, <&pll1_sysclk 3>;
+		clock-names = "clksrc", "extclksrc";
+		ti,clkmode-square-wave;
+
+		pll0_pllout: pllout {
+			#clock-cells = <0>;
+		};
+
+		pll0_sysclk: sysclk {
+			#clock-cells = <1>;
+		};
+
+		pll0_auxclk: auxclk {
+			#clock-cells = <0>;
+		};
+
+		pll0_obsclk: obsclk {
+			#clock-cells = <0>;
+		};
+	};
+
+	pll1: clock-controller@21a000 {
+		compatible = "ti,da850-pll1";
+		reg = <0x21a000 0x1000>;
+		clocks = <&ref_clk>;
+		clock-names = "clksrc";
+
+		pll0_sysclk: sysclk {
+			#clock-cells = <1>;
+		};
+
+		pll0_obsclk: obsclk {
+			#clock-cells = <0>;
+		};
+	};
+
+Also see:
+- Documentation/devicetree/bindings/clock/clock-bindings.txt
diff --git a/Bindings/clock/ti/davinci/psc.txt b/Bindings/clock/ti/davinci/psc.txt
new file mode 100644
index 0000000..5f746eb
--- /dev/null
+++ b/Bindings/clock/ti/davinci/psc.txt
@@ -0,0 +1,71 @@
+Binding for TI DaVinci Power Sleep Controller (PSC)
+
+The PSC provides power management, clock gating and reset functionality. It is
+primarily used for clocking.
+
+Required properties:
+- compatible: shall be one of:
+	- "ti,da850-psc0" for PSC0 on DA850/OMAP-L138/AM18XX
+	- "ti,da850-psc1" for PSC1 on DA850/OMAP-L138/AM18XX
+- reg: physical base address and size of the controller's register area
+- #clock-cells: from common clock binding; shall be set to 1
+- #power-domain-cells: from generic power domain binding; shall be set to 1.
+- clocks: phandles to clocks corresponding to the clock-names property
+- clock-names: list of parent clock names - depends on compatible value
+	- for "ti,da850-psc0", shall be "pll0_sysclk1", "pll0_sysclk2",
+	  "pll0_sysclk4", "pll0_sysclk6", "async1"
+	- for "ti,da850-psc1", shall be "pll0_sysclk2", "pll0_sysclk4", "async3"
+
+Optional properties:
+- #reset-cells: from reset binding; shall be set to 1 - only applicable when
+  at least one local domain provides a local reset.
+
+Consumers:
+
+	Clock, power domain and reset consumers shall use the local power domain
+	module ID (LPSC) as the index corresponding to the clock cell. Refer to
+	the device-specific datasheet to find these numbers. NB: Most local
+	domains	only provide a clock/power domain and not a reset.
+
+Examples:
+
+	psc0: clock-controller@10000 {
+		compatible = "ti,da850-psc0";
+		reg = <0x10000 0x1000>;
+		#clock-cells = <1>;
+		#power-domain-cells = <1>;
+		#reset-cells = <1>;
+		clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>,
+			 <&pll0_sysclk 4>, <&pll0_sysclk 6>, <&async1_clk>;
+		clock_names = "pll0_sysclk1", "pll0_sysclk2",
+			      "pll0_sysclk4", "pll0_sysclk6", "async1";
+	};
+	psc1: clock-controller@227000 {
+		compatible = "ti,da850-psc1";
+		reg = <0x227000 0x1000>;
+		#clock-cells = <1>;
+		#power-domain-cells = <1>;
+		clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>, <&async3_clk>;
+		clock_names = "pll0_sysclk2", "pll0_sysclk4", "async3";
+	};
+
+	/* consumer */
+	dsp: dsp@11800000 {
+		compatible = "ti,da850-dsp";
+		reg = <0x11800000 0x40000>,
+		      <0x11e00000 0x8000>,
+		      <0x11f00000 0x8000>,
+		      <0x01c14044 0x4>,
+		      <0x01c14174 0x8>;
+		reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
+		interrupt-parent = <&intc>;
+		interrupts = <28>;
+		clocks = <&psc0 15>;
+		power-domains = <&psc0 15>;
+		resets = <&psc0 15>;
+	};
+
+Also see:
+- Documentation/devicetree/bindings/clock/clock-bindings.txt
+- Documentation/devicetree/bindings/power/power-domain.yaml
+- Documentation/devicetree/bindings/reset/reset.txt
diff --git a/Bindings/clock/ti/divider.txt b/Bindings/clock/ti/divider.txt
new file mode 100644
index 0000000..9b13b32
--- /dev/null
+++ b/Bindings/clock/ti/divider.txt
@@ -0,0 +1,117 @@
+Binding for TI divider clock
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped adjustable clock rate divider that does not gate and has
+only one input clock or parent.  By default the value programmed into
+the register is one less than the actual divisor value.  E.g:
+
+register value		actual divisor value
+0			1
+1			2
+2			3
+
+This assumption may be modified by the following optional properties:
+
+ti,index-starts-at-one - valid divisor values start at 1, not the default
+of 0.  E.g:
+register value		actual divisor value
+1			1
+2			2
+3			3
+
+ti,index-power-of-two - valid divisor values are powers of two.  E.g:
+register value		actual divisor value
+0			1
+1			2
+2			4
+
+Additionally an array of valid dividers may be supplied like so:
+
+	ti,dividers = <4>, <8>, <0>, <16>;
+
+Which will map the resulting values to a divisor table by their index:
+register value		actual divisor value
+0			4
+1			8
+2			<invalid divisor, skipped>
+3			16
+
+Any zero value in this array means the corresponding bit-value is invalid
+and must not be used.
+
+The binding must also provide the register to control the divider and
+unless the divider array is provided, min and max dividers. Optionally
+the number of bits to shift that mask, if necessary. If the shift value
+is missing it is the same as supplying a zero shift.
+
+This binding can also optionally provide support to the hardware autoidle
+feature, see [2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
+
+Required properties:
+- compatible : shall be "ti,divider-clock" or "ti,composite-divider-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link to phandle of parent clock
+- reg : offset for register controlling adjustable divider
+
+Optional properties:
+- clock-output-names : from common clock binding.
+- ti,dividers : array of integers defining divisors
+- ti,bit-shift : number of bits to shift the divider value, defaults to 0
+- ti,min-div : min divisor for dividing the input clock rate, only
+  needed if the first divisor is offset from the default value (1)
+- ti,max-div : max divisor for dividing the input clock rate, only needed
+  if ti,dividers is not defined.
+- ti,index-starts-at-one : valid divisor programming starts at 1, not zero,
+  only valid if ti,dividers is not defined.
+- ti,index-power-of-two : valid divisor programming must be a power of two,
+  only valid if ti,dividers is not defined.
+- ti,autoidle-shift : bit shift of the autoidle enable bit for the clock,
+  see [2]
+- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0,
+  see [2]
+- ti,set-rate-parent : clk_set_rate is propagated to parent
+- ti,latch-bit : latch the divider value to HW, only needed if the register
+  access requires this. As an example dra76x DPLL_GMAC H14 divider implements
+  such behavior.
+
+Examples:
+dpll_usb_m2_ck: dpll_usb_m2_ck@4a008190 {
+	#clock-cells = <0>;
+	compatible = "ti,divider-clock";
+	clocks = <&dpll_usb_ck>;
+	ti,max-div = <127>;
+	reg = <0x190>;
+	ti,index-starts-at-one;
+};
+
+aess_fclk: aess_fclk@4a004528 {
+	#clock-cells = <0>;
+	compatible = "ti,divider-clock";
+	clocks = <&abe_clk>;
+	ti,bit-shift = <24>;
+	reg = <0x528>;
+	ti,max-div = <2>;
+};
+
+dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck {
+	#clock-cells = <0>;
+	compatible = "ti,composite-divider-clock";
+	clocks = <&dpll_core_x2_ck>;
+	ti,max-div = <31>;
+	reg = <0x0134>;
+	ti,index-starts-at-one;
+};
+
+ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 {
+	#clock-cells = <0>;
+	compatible = "ti,composite-divider-clock";
+	clocks = <&corex2_fck>;
+	ti,bit-shift = <8>;
+	reg = <0x0a40>;
+	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+};
diff --git a/Bindings/clock/ti/dpll.txt b/Bindings/clock/ti/dpll.txt
new file mode 100644
index 0000000..37a7cb6
--- /dev/null
+++ b/Bindings/clock/ti/dpll.txt
@@ -0,0 +1,105 @@
+Binding for Texas Instruments DPLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped DPLL with usually two selectable input clocks
+(reference clock and bypass clock), with digital phase locked
+loop logic for multiplying the input clock to a desired output
+clock. This clock also typically supports different operation
+modes (locked, low power stop etc.) This binding has several
+sub-types, which effectively result in slightly different setup
+for the actual DPLL clock.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of:
+		"ti,omap3-dpll-clock",
+		"ti,omap3-dpll-core-clock",
+		"ti,omap3-dpll-per-clock",
+		"ti,omap3-dpll-per-j-type-clock",
+		"ti,omap4-dpll-clock",
+		"ti,omap4-dpll-x2-clock",
+		"ti,omap4-dpll-core-clock",
+		"ti,omap4-dpll-m4xen-clock",
+		"ti,omap4-dpll-j-type-clock",
+		"ti,omap5-mpu-dpll-clock",
+		"ti,am3-dpll-no-gate-clock",
+		"ti,am3-dpll-j-type-clock",
+		"ti,am3-dpll-no-gate-j-type-clock",
+		"ti,am3-dpll-clock",
+		"ti,am3-dpll-core-clock",
+		"ti,am3-dpll-x2-clock",
+		"ti,omap2-dpll-core-clock",
+
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks, first entry lists reference clock
+  and second entry bypass clock
+- reg : offsets for the register set for controlling the DPLL.
+  Registers are listed in following order:
+	"control" - contains the control register base address
+	"idlest" - contains the idle status register base address
+	"mult-div1" - contains the multiplier / divider register base address
+	"autoidle" - contains the autoidle register base address (optional)
+	"ssc-deltam" - DPLL supports spread spectrum clocking (SSC), contains
+		       the frequency spreading register base address (optional)
+	"ssc-modfreq" - DPLL supports spread spectrum clocking (SSC), contains
+		        the modulation frequency register base address
+			(optional)
+  ti,am3-* dpll types do not have autoidle register
+  ti,omap2-* dpll type does not support idlest / autoidle registers
+
+Optional properties:
+- DPLL mode setting - defining any one or more of the following overrides
+  default setting.
+	- ti,low-power-stop : DPLL supports low power stop mode, gating output
+	- ti,low-power-bypass : DPLL output matches rate of parent bypass clock
+	- ti,lock : DPLL locks in programmed rate
+	- ti,min-div : the minimum divisor to start from to round the DPLL
+		       target rate
+	- ti,ssc-deltam : DPLL supports spread spectrum clocking, frequency
+			  spreading in permille (10th of a percent)
+	- ti,ssc-modfreq-hz : DPLL supports spread spectrum clocking, spread
+			      spectrum modulation frequency
+	- ti,ssc-downspread : DPLL supports spread spectrum clocking, boolean
+			      to enable the downspread feature
+
+Examples:
+	dpll_core_ck: dpll_core_ck@44e00490 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x490>, <0x45c>, <0x488>, <0x468>;
+	};
+
+	dpll2_ck: dpll2_ck@48004004 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&dpll2_fck>;
+		ti,low-power-stop;
+		ti,low-power-bypass;
+		ti,lock;
+		reg = <0x4>, <0x24>, <0x34>, <0x40>;
+	};
+
+	dpll_core_ck: dpll_core_ck@44e00490 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x90>, <0x5c>, <0x68>;
+	};
+
+	dpll_ck: dpll_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-dpll-core-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0500>, <0x0540>;
+	};
+
+	dpll_disp_ck: dpll_disp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>;
+	};
diff --git a/Bindings/clock/ti/dra7-atl.txt b/Bindings/clock/ti/dra7-atl.txt
new file mode 100644
index 0000000..6850407
--- /dev/null
+++ b/Bindings/clock/ti/dra7-atl.txt
@@ -0,0 +1,94 @@
+Device Tree Clock bindings for ATL (Audio Tracking Logic) of DRA7 SoC.
+
+The ATL IP is used to generate clock to be used to synchronize baseband and
+audio codec. A single ATL IP provides four ATL clock instances sharing the same
+functional clock but can be configured to provide different clocks.
+ATL can maintain a clock averages to some desired frequency based on the bws/aws
+signals - can compensate the drift between the two ws signal.
+
+In order to provide the support for ATL and its output clocks (which can be used
+internally within the SoC or external components) two sets of bindings is needed:
+
+Clock tree binding:
+This binding uses the common clock binding[1].
+To be able to integrate the ATL clocks with DT clock tree.
+Provides ccf level representation of the ATL clocks to be used by drivers.
+Since the clock instances are part of a single IP this binding is used as a node
+for the DT clock tree, the IP driver is needed to handle the actual configuration
+of the IP.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,dra7-atl-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles to functional clock of ATL
+
+Binding for the IP driver:
+This binding is used to configure the IP driver which is going to handle the
+configuration of the IP for the ATL clock instances.
+
+Required properties:
+- compatible : shall be "ti,dra7-atl"
+- reg : base address for the ATL IP
+- ti,provided-clocks : List of phandles to the clocks associated with the ATL
+- clocks : link phandles to functional clock of ATL
+- clock-names : Shall be set to "fck"
+- ti,hwmods : Shall be set to "atl"
+
+Optional properties:
+Configuration of ATL instances:
+- atl{0/1/2/3} {
+	- bws : Baseband word select signal selection
+	- aws : Audio word select signal selection
+};
+
+For valid word select signals, see the dt-bindings/clock/ti-dra7-atl.h include
+file.
+
+Examples:
+/* clock bindings for atl provided clocks */
+atl_clkin0_ck: atl_clkin0_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin1_ck: atl_clkin1_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin2_ck: atl_clkin2_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin3_ck: atl_clkin3_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+/* binding for the IP */
+atl: atl@4843c000 {
+	compatible = "ti,dra7-atl";
+	reg = <0x4843c000 0x3ff>;
+	ti,hwmods = "atl";
+	ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
+				<&atl_clkin2_ck>, <&atl_clkin3_ck>;
+	clocks = <&atl_gfclk_mux>;
+	clock-names = "fck";
+};
+
+#include <dt-bindings/clock/ti-dra7-atl.h>
+
+&atl {
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
diff --git a/Bindings/clock/ti/fapll.txt b/Bindings/clock/ti/fapll.txt
new file mode 100644
index 0000000..c19b3f2
--- /dev/null
+++ b/Bindings/clock/ti/fapll.txt
@@ -0,0 +1,33 @@
+Binding for Texas Instruments FAPLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped FAPLL with usually two selectable input clocks
+(reference clock and bypass clock), and one or more child
+syntesizers.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,dm816-fapll-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks (clk-ref and clk-bypass)
+- reg : address and length of the register set for controlling the FAPLL.
+
+Examples:
+	main_fapll: main_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x400 0x40>;
+		clocks = <&sys_clkin_ck &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>, <4>, <5>,
+				<6>, <7>;
+		clock-output-names = "main_pll_clk1",
+				     "main_pll_clk2",
+				     "main_pll_clk3",
+				     "main_pll_clk4",
+				     "main_pll_clk5",
+				     "main_pll_clk6",
+				     "main_pll_clk7";
+	};
diff --git a/Bindings/clock/ti/fixed-factor-clock.txt b/Bindings/clock/ti/fixed-factor-clock.txt
new file mode 100644
index 0000000..518e3c1
--- /dev/null
+++ b/Bindings/clock/ti/fixed-factor-clock.txt
@@ -0,0 +1,44 @@
+Binding for TI fixed factor rate clock sources.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1], and also uses the autoidle
+support from TI autoidle clock [2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
+
+Required properties:
+- compatible : shall be "ti,fixed-factor-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- ti,clock-div: fixed divider.
+- ti,clock-mult: fixed multiplier.
+- clocks: parent clock.
+
+Optional properties:
+- clock-output-names : from common clock binding.
+- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock,
+  see [2]
+- reg: offset for the autoidle register of this clock, see [2]
+- ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0, see [2]
+- ti,set-rate-parent: clk_set_rate is propagated to parent
+
+Example:
+	clock {
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&parentclk>;
+		#clock-cells = <0>;
+		ti,clock-div = <2>;
+		ti,clock-mult = <1>;
+	};
+
+	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b4>;
+		ti,clock-mult = <1>;
+		ti,invert-autoidle-bit;
+	};
diff --git a/Bindings/clock/ti/gate.txt b/Bindings/clock/ti/gate.txt
new file mode 100644
index 0000000..4982615
--- /dev/null
+++ b/Bindings/clock/ti/gate.txt
@@ -0,0 +1,107 @@
+Binding for Texas Instruments gate clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. This clock is
+quite much similar to the basic gate-clock [2], however,
+it supports a number of additional features. If no register
+is provided for this clock, the code assumes that a clockdomain
+will be controlled instead and the corresponding hw-ops for
+that is used.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
+[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
+
+Required properties:
+- compatible : shall be one of:
+  "ti,gate-clock" - basic gate clock
+  "ti,wait-gate-clock" - gate clock which waits until clock is active before
+			 returning from clk_enable()
+  "ti,dss-gate-clock" - gate clock with DSS specific hardware handling
+  "ti,am35xx-gate-clock" - gate clock with AM35xx specific hardware handling
+  "ti,clkdm-gate-clock" - clockdomain gate clock, which derives its functional
+			  clock directly from a clockdomain, see [3] how
+			  to map clockdomains properly
+  "ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling,
+			  required for a hardware errata
+  "ti,composite-gate-clock" - composite gate clock, to be part of composite
+			      clock
+  "ti,composite-no-wait-gate-clock" - composite gate clock that does not wait
+				      for clock to be active before returning
+				      from clk_enable()
+- #clock-cells : from common clock binding; shall be set to 0
+- clocks : link to phandle of parent clock
+- reg : offset for register controlling adjustable gate, not needed for
+	ti,clkdm-gate-clock type
+
+Optional properties:
+- clock-output-names : from common clock binding.
+- ti,bit-shift : bit shift for programming the clock gate, invalid for
+		 ti,clkdm-gate-clock type
+- ti,set-bit-to-disable : inverts default gate programming. Setting the bit
+  gates the clock and clearing the bit ungates the clock.
+
+Examples:
+	mmchs2_fck: mmchs2_fck@48004a00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <25>;
+	};
+
+	uart4_fck_am35xx: uart4_fck_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <23>;
+	};
+
+	dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2@48004e00 {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&dpll4_m4x2_ck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <0>;
+	};
+
+	emac_ick: emac_ick@4800259c {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x059c>;
+		ti,bit-shift = <1>;
+	};
+
+	emu_src_ck: emu_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&emu_src_mux_ck>;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck@48004d00 {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	vlynq_gate_fck: vlynq_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0200>;
+	};
+
+	sys_clkout2_src_gate: sys_clkout2_src_gate {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <15>;
+		reg = <0x0070>;
+	};
diff --git a/Bindings/clock/ti/interface.txt b/Bindings/clock/ti/interface.txt
new file mode 100644
index 0000000..d3eb5ca
--- /dev/null
+++ b/Bindings/clock/ti/interface.txt
@@ -0,0 +1,57 @@
+Binding for Texas Instruments interface clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. This clock is
+quite much similar to the basic gate-clock [2], however,
+it supports a number of additional features, including
+companion clock finding (match corresponding functional gate
+clock) and hardware autoidle enable / disable.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
+
+Required properties:
+- compatible : shall be one of:
+  "ti,omap3-interface-clock" - basic OMAP3 interface clock
+  "ti,omap3-no-wait-interface-clock" - interface clock which has no hardware
+				       capability for waiting clock to be ready
+  "ti,omap3-hsotgusb-interface-clock" - interface clock with USB specific HW
+					handling
+  "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling
+  "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling
+  "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling
+  "ti,omap2430-interface-clock" - interface clock with OMAP2430 specific HW
+				  handling
+- #clock-cells : from common clock binding; shall be set to 0
+- clocks : link to phandle of parent clock
+- reg : base address for the control register
+
+Optional properties:
+- clock-output-names : from common clock binding.
+- ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0)
+
+Examples:
+	aes1_ick: aes1_ick@48004a14 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x48004a14 0x4>;
+		ti,bit-shift = <3>;
+	};
+
+	cam_ick: cam_ick@48004f10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x48004f10 0x4>;
+		ti,bit-shift = <0>;
+	};
+
+	ssi_ick_3430es2: ssi_ick_3430es2@48004a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-ssi-interface-clock";
+		clocks = <&ssi_l4_ick>;
+		reg = <0x48004a10 0x4>;
+		ti,bit-shift = <0>;
+	};
diff --git a/Bindings/clock/ti/mux.txt b/Bindings/clock/ti/mux.txt
new file mode 100644
index 0000000..b33f641
--- /dev/null
+++ b/Bindings/clock/ti/mux.txt
@@ -0,0 +1,80 @@
+Binding for TI mux clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped multiplexer with multiple input clock signals or
+parents, one of which can be selected as output.  This clock does not
+gate or adjust the parent rate via a divider or multiplier.
+
+By default the "clocks" property lists the parents in the same order
+as they are programmed into the register.  E.g:
+
+	clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>;
+
+results in programming the register as follows:
+
+register value		selected parent clock
+0			foo_clock
+1			bar_clock
+2			baz_clock
+
+Some clock controller IPs do not allow a value of zero to be programmed
+into the register, instead indexing begins at 1.  The optional property
+"index-starts-at-one" modified the scheme as follows:
+
+register value		selected clock parent
+1			foo_clock
+2			bar_clock
+3			baz_clock
+
+The binding must provide the register to control the mux. Optionally
+the number of bits to shift the control field in the register can be
+supplied. If the shift value is missing it is the same as supplying
+a zero shift.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,mux-clock" or "ti,composite-mux-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks
+- reg : register offset for register controlling adjustable mux
+
+Optional properties:
+- clock-output-names : from common clock binding.
+- ti,bit-shift : number of bits to shift the bit-mask, defaults to
+  0 if not present
+- ti,index-starts-at-one : valid input select programming starts at 1, not
+  zero
+- ti,set-rate-parent : clk_set_rate is propagated to parent clock,
+  not supported by the composite-mux-clock subtype
+- ti,latch-bit : latch the mux value to HW, only needed if the register
+  access requires this. As an example, dra7x DPLL_GMAC H14 muxing
+  implements such behavior.
+
+Examples:
+
+sys_clkin_ck: sys_clkin_ck@4a306110 {
+	#clock-cells = <0>;
+	compatible = "ti,mux-clock";
+	clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+	reg = <0x0110>;
+	ti,index-starts-at-one;
+};
+
+abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@4a306108 {
+	#clock-cells = <0>;
+	compatible = "ti,mux-clock";
+	clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+	ti,bit-shift = <24>;
+	reg = <0x0108>;
+};
+
+mcbsp5_mux_fck: mcbsp5_mux_fck {
+	#clock-cells = <0>;
+	compatible = "ti,composite-mux-clock";
+	clocks = <&core_96m_fck>, <&mcbsp_clks>;
+	ti,bit-shift = <4>;
+	reg = <0x02d8>;
+};
diff --git a/Bindings/clock/ti/ti,clksel.yaml b/Bindings/clock/ti/ti,clksel.yaml
new file mode 100644
index 0000000..d525f96
--- /dev/null
+++ b/Bindings/clock/ti/ti,clksel.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,clksel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI clksel clock
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description: |
+  The TI CLKSEL clocks consist of consist of input clock mux bits, and in some
+  cases also has divider, multiplier and gate bits.
+
+properties:
+  compatible:
+    const: ti,clksel
+
+  reg:
+    maxItems: 1
+    description: The CLKSEL register range
+
+  '#address-cells':
+    enum: [ 0, 1, 2 ]
+
+  '#size-cells':
+    enum: [ 0, 1, 2 ]
+
+  ranges: true
+
+  "#clock-cells":
+    const: 2
+    description: The CLKSEL register and bit offset
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    clksel_gfx_fclk: clock@52c {
+      compatible = "ti,clksel";
+      reg = <0x25c 0x4>;
+      #clock-cells = <2>;
+    };
+...
diff --git a/Bindings/clock/toshiba,tmpv770x-pipllct.yaml b/Bindings/clock/toshiba,tmpv770x-pipllct.yaml
new file mode 100644
index 0000000..d36558a
--- /dev/null
+++ b/Bindings/clock/toshiba,tmpv770x-pipllct.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/toshiba,tmpv770x-pipllct.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 TMPV770X PLL Controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshia Visconti5 PLL controller which supports the PLLs on TMPV770X.
+
+properties:
+  compatible:
+    const: toshiba,tmpv7708-pipllct
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    description: External reference clock (OSC2)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+
+    osc2_clk: osc2-clk {
+      compatible = "fixed-clock";
+      clock-frequency = <20000000>;
+      #clock-cells = <0>;
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pipllct: clock-controller@24220000 {
+            compatible = "toshiba,tmpv7708-pipllct";
+            reg = <0 0x24220000 0 0x820>;
+            #clock-cells = <1>;
+            clocks = <&osc2_clk>;
+        };
+    };
+...
diff --git a/Bindings/clock/toshiba,tmpv770x-pismu.yaml b/Bindings/clock/toshiba,tmpv770x-pismu.yaml
new file mode 100644
index 0000000..081f85b
--- /dev/null
+++ b/Bindings/clock/toshiba,tmpv770x-pismu.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/toshiba,tmpv770x-pismu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 TMPV770x SMU controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshia Visconti5 SMU (System Management Unit) which supports the clock
+  and resets on TMPV770x.
+
+properties:
+  compatible:
+    items:
+      - const: toshiba,tmpv7708-pismu
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pismu: syscon@24200000 {
+            compatible = "toshiba,tmpv7708-pismu", "syscon";
+            reg = <0 0x24200000 0 0x2140>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+        };
+    };
+...
diff --git a/Bindings/clock/vf610-clock.txt b/Bindings/clock/vf610-clock.txt
new file mode 100644
index 0000000..109ffa3
--- /dev/null
+++ b/Bindings/clock/vf610-clock.txt
@@ -0,0 +1,41 @@
+* Clock bindings for Freescale Vybrid VF610 SOC
+
+Required properties:
+- compatible: Should be "fsl,vf610-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+Optional properties:
+- clocks: list of clock identifiers which are external input clocks to the
+	given clock controller. Please refer the next section to find
+	the input clocks for a given controller.
+- clock-names: list of names of clocks which are external input clocks to the
+	given clock controller.
+
+Input clocks for top clock controller:
+	- sxosc (external crystal oscillator 32KHz, recommended)
+	- fxosc (external crystal oscillator 24MHz, recommended)
+	- audio_ext
+	- enet_ext
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h
+for the full list of VF610 clock IDs.
+
+Examples:
+
+clks: ccm@4006b000 {
+	compatible = "fsl,vf610-ccm";
+	reg = <0x4006b000 0x1000>;
+	#clock-cells = <1>;
+	clocks = <&sxosc>, <&fxosc>;
+	clock-names = "sxosc", "fxosc";
+};
+
+uart1: serial@40028000 {
+	compatible = "fsl,vf610-uart";
+	reg = <0x40028000 0x1000>;
+	interrupts = <0 62 0x04>;
+	clocks = <&clks VF610_CLK_UART1>;
+	clock-names = "ipg";
+};
diff --git a/Bindings/clock/vt8500.txt b/Bindings/clock/vt8500.txt
new file mode 100644
index 0000000..91d71cc
--- /dev/null
+++ b/Bindings/clock/vt8500.txt
@@ -0,0 +1,74 @@
+Device Tree Clock bindings for arch-vt8500
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"via,vt8500-pll-clock" - for a VT8500/WM8505 PLL clock
+	"wm,wm8650-pll-clock" - for a WM8650 PLL clock
+	"wm,wm8750-pll-clock" - for a WM8750 PLL clock
+	"wm,wm8850-pll-clock" - for a WM8850 PLL clock
+	"via,vt8500-device-clock" - for a VT/WM device clock
+
+Required properties for PLL clocks:
+- reg : shall be the control register offset from PMC base for the pll clock.
+- clocks : shall be the input parent clock phandle for the clock. This should
+	be the reference clock.
+- #clock-cells : from common clock binding; shall be set to 0.
+
+Required properties for device clocks:
+- clocks : shall be the input parent clock phandle for the clock. This should
+	be a pll output.
+- #clock-cells : from common clock binding; shall be set to 0.
+
+
+Device Clocks
+
+Device clocks are required to have one or both of the following sets of
+properties:
+
+
+Gated device clocks:
+
+Required properties:
+- enable-reg : shall be the register offset from PMC base for the enable
+	register.
+- enable-bit : shall be the bit within enable-reg to enable/disable the clock.
+
+
+Divisor device clocks:
+
+Required property:
+- divisor-reg : shall be the register offset from PMC base for the divisor
+	register.
+Optional property:
+- divisor-mask : shall be the mask for the divisor register. Defaults to 0x1f
+	if not specified.
+
+
+For example:
+
+ref25: ref25M {
+	#clock-cells = <0>;
+	compatible = "fixed-clock";
+	clock-frequency = <25000000>;
+};
+
+plla: plla {
+	#clock-cells = <0>;
+	compatible = "wm,wm8650-pll-clock";
+	clocks = <&ref25>;
+	reg = <0x200>;
+};
+
+sdhc: sdhc {
+	#clock-cells = <0>;
+	compatible = "via,vt8500-device-clock";
+	clocks = <&pllb>;
+	divisor-reg = <0x328>;
+	divisor-mask = <0x3f>;
+	enable-reg = <0x254>;
+	enable-bit = <18>;
+};
diff --git a/Bindings/clock/xgene.txt b/Bindings/clock/xgene.txt
new file mode 100644
index 0000000..8233e77
--- /dev/null
+++ b/Bindings/clock/xgene.txt
@@ -0,0 +1,131 @@
+Device Tree Clock bindings for APM X-Gene
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
+	"apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
+	"apm,xgene-pmd-clock" - for a X-Gene PMD clock
+	"apm,xgene-device-clock" - for a X-Gene device clock
+	"apm,xgene-socpll-v2-clock" - for a X-Gene SoC PLL v2 clock
+	"apm,xgene-pcppll-v2-clock" - for a X-Gene PCP PLL v2 clock
+
+Required properties for SoC or PCP PLL clocks:
+- reg : shall be the physical PLL register address for the pll clock.
+- clocks : shall be the input parent clock phandle for the clock. This should
+	be the reference clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the PLL referenced by derive
+  clock.
+Optional properties for PLL clocks:
+- clock-names : shall be the name of the PLL. If missing, use the device name.
+
+Required properties for PMD clocks:
+- reg : shall be the physical register address for the pmd clock.
+- clocks : shall be the input parent clock phandle for the clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the clock referenced by derive
+  clock.
+Optional properties for PLL clocks:
+- clock-names : shall be the name of the clock. If missing, use the device name.
+
+Required properties for device clocks:
+- reg : shall be a list of address and length pairs describing the CSR
+         reset and/or the divider. Either may be omitted, but at least
+         one must be present.
+ - reg-names : shall be a string list describing the reg resource. This
+               may include "csr-reg" and/or "div-reg". If this property
+               is not present, the reg property is assumed to describe
+               only "csr-reg".
+- clocks : shall be the input parent clock phandle for the clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the device referenced.
+Optional properties for device clocks:
+- clock-names : shall be the name of the device clock. If missing, use the
+                device name.
+- csr-offset : Offset to the CSR reset register from the reset address base.
+               Default is 0.
+- csr-mask : CSR reset mask bit. Default is 0xF.
+- enable-offset : Offset to the enable register from the reset address base.
+                  Default is 0x8.
+- enable-mask : CSR enable mask bit. Default is 0xF.
+- divider-offset : Offset to the divider CSR register from the divider base.
+                   Default is 0x0.
+- divider-width : Width of the divider register. Default is 0.
+- divider-shift : Bit shift of the divider register. Default is 0.
+
+For example:
+
+	pcppll: pcppll@17000100 {
+		compatible = "apm,xgene-pcppll-clock";
+		#clock-cells = <1>;
+		clocks = <&refclk 0>;
+		clock-names = "pcppll";
+		reg = <0x0 0x17000100 0x0 0x1000>;
+		clock-output-names = "pcppll";
+		type = <0>;
+	};
+
+	pmd0clk: pmd0clk@7e200200 {
+		compatible = "apm,xgene-pmd-clock";
+		#clock-cells = <1>;
+		clocks = <&pmdpll 0>;
+		reg = <0x0 0x7e200200 0x0 0x10>;
+		clock-output-names = "pmd0clk";
+	};
+
+	socpll: socpll@17000120 {
+		compatible = "apm,xgene-socpll-clock";
+		#clock-cells = <1>;
+		clocks = <&refclk 0>;
+		clock-names = "socpll";
+		reg = <0x0 0x17000120 0x0 0x1000>;
+		clock-output-names = "socpll";
+		type = <1>;
+	};
+
+	qmlclk: qmlclk {
+		compatible = "apm,xgene-device-clock";
+		#clock-cells = <1>;
+		clocks = <&socplldiv2 0>;
+		clock-names = "qmlclk";
+		reg = <0x0 0x1703C000 0x0 0x1000>;
+		reg-name = "csr-reg";
+		clock-output-names = "qmlclk";
+	};
+
+	ethclk: ethclk {
+		compatible = "apm,xgene-device-clock";
+		#clock-cells = <1>;
+		clocks = <&socplldiv2 0>;
+		clock-names = "ethclk";
+		reg = <0x0 0x17000000 0x0 0x1000>;
+		reg-names = "div-reg";
+		divider-offset = <0x238>;
+		divider-width = <0x9>;
+		divider-shift = <0x0>;
+		clock-output-names = "ethclk";
+	};
+
+	apbclk: apbclk {
+		compatible = "apm,xgene-device-clock";
+		#clock-cells = <1>;
+		clocks = <&ahbclk 0>;
+		clock-names = "apbclk";
+		reg = <0x0 0x1F2AC000 0x0 0x1000
+			0x0 0x1F2AC000 0x0 0x1000>;
+		reg-names = "csr-reg", "div-reg";
+		csr-offset = <0x0>;
+		csr-mask = <0x200>;
+		enable-offset = <0x8>;
+		enable-mask = <0x200>;
+		divider-offset = <0x10>;
+		divider-width = <0x2>;
+		divider-shift = <0x0>;
+		flags = <0x8>;
+		clock-output-names = "apbclk";
+	};
+
diff --git a/Bindings/clock/xlnx,clocking-wizard.yaml b/Bindings/clock/xlnx,clocking-wizard.yaml
new file mode 100644
index 0000000..02bd556
--- /dev/null
+++ b/Bindings/clock/xlnx,clocking-wizard.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/xlnx,clocking-wizard.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx clocking wizard
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+
+description:
+  The clocking wizard is a soft ip clocking block of Xilinx versal. It
+  reads required input clock frequencies from the devicetree and acts as clock
+  clock output.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,clocking-wizard
+      - xlnx,clocking-wizard-v5.2
+      - xlnx,clocking-wizard-v6.0
+
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: clock input
+      - description: axi clock
+
+  clock-names:
+    items:
+      - const: clk_in1
+      - const: s_axi_aclk
+
+
+  xlnx,speed-grade:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+    description:
+      Speed grade of the device. Higher the speed grade faster is the FPGA device.
+
+  xlnx,nr-outputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 8
+    description:
+      Number of outputs.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - xlnx,speed-grade
+  - xlnx,nr-outputs
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@b0000000  {
+        compatible = "xlnx,clocking-wizard";
+        reg = <0xb0000000 0x10000>;
+        #clock-cells = <1>;
+        xlnx,speed-grade = <1>;
+        xlnx,nr-outputs = <6>;
+        clock-names = "clk_in1", "s_axi_aclk";
+        clocks = <&clkc 15>, <&clkc 15>;
+    };
+...
diff --git a/Bindings/clock/xlnx,versal-clk.yaml b/Bindings/clock/xlnx,versal-clk.yaml
new file mode 100644
index 0000000..1ba687d
--- /dev/null
+++ b/Bindings/clock/xlnx,versal-clk.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/xlnx,versal-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Versal clock controller
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+description: |
+  The clock controller is a hardware block of Xilinx versal clock tree. It
+  reads required input clock frequencies from the devicetree and acts as clock
+  provider for all clock consumers of PS clocks.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - xlnx,versal-clk
+          - xlnx,zynqmp-clk
+      - items:
+          - enum:
+              - xlnx,versal-net-clk
+          - const: xlnx,versal-clk
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    description: List of clock specifiers which are external input
+      clocks to the given clock controller.
+    minItems: 3
+    maxItems: 8
+
+  clock-names:
+    minItems: 3
+    maxItems: 8
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,versal-clk
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: reference clock
+            - description: alternate reference clock
+            - description: alternate reference clock for programmable logic
+
+        clock-names:
+          items:
+            - const: ref
+            - const: alt_ref
+            - const: pl_alt_ref
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,zynqmp-clk
+
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          items:
+            - description: PS reference clock
+            - description: reference clock for video system
+            - description: alternative PS reference clock
+            - description: auxiliary reference clock
+            - description: transceiver reference clock
+            - description: (E)MIO clock source  (Optional clock)
+            - description: GEM emio clock  (Optional clock)
+            - description: Watchdog external clock (Optional clock)
+
+        clock-names:
+          minItems: 5
+          items:
+            - const: pss_ref_clk
+            - const: video_clk
+            - const: pss_alt_ref_clk
+            - const: aux_ref_clk
+            - const: gt_crx_ref_clk
+            - pattern: "^mio_clk[00-77]+.*$"
+            - pattern: "gem[0-3]+_emio_clk.*$"
+            - pattern: "swdt[0-1]+_ext_clk.*$"
+
+examples:
+  - |
+    firmware {
+      zynqmp_firmware: zynqmp-firmware {
+        compatible = "xlnx,zynqmp-firmware";
+        method = "smc";
+        versal_clk: clock-controller {
+          #clock-cells = <1>;
+          compatible = "xlnx,versal-clk";
+          clocks = <&ref>, <&alt_ref>, <&pl_alt_ref>;
+          clock-names = "ref", "alt_ref", "pl_alt_ref";
+        };
+      };
+    };
+
+    clock-controller {
+        #clock-cells = <1>;
+        compatible = "xlnx,zynqmp-clk";
+        clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>,
+                 <&aux_ref_clk>, <&gt_crx_ref_clk>;
+        clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk",
+                      "aux_ref_clk", "gt_crx_ref_clk";
+    };
+...
diff --git a/Bindings/clock/zynq-7000.txt b/Bindings/clock/zynq-7000.txt
new file mode 100644
index 0000000..d93746c
--- /dev/null
+++ b/Bindings/clock/zynq-7000.txt
@@ -0,0 +1,110 @@
+Device Tree Clock bindings for the Zynq 7000 EPP
+
+The Zynq EPP has several different clk providers, each with there own bindings.
+The purpose of this document is to document their usage.
+
+See clock_bindings.txt for more information on the generic clock bindings.
+See Chapter 25 of Zynq TRM for more information about Zynq clocks.
+
+== Clock Controller ==
+The clock controller is a logical abstraction of Zynq's clock tree. It reads
+required input clock frequencies from the devicetree and acts as clock provider
+for all clock consumers of PS clocks.
+
+Required properties:
+ - #clock-cells : Must be 1
+ - compatible : "xlnx,ps7-clkc"
+ - reg : SLCR offset and size taken via syscon < 0x100 0x100 >
+ - ps-clk-frequency : Frequency of the oscillator providing ps_clk in HZ
+		      (usually 33 MHz oscillators are used for Zynq platforms)
+ - clock-output-names : List of strings used to name the clock outputs. Shall be
+			a list of the outputs given below.
+
+Optional properties:
+ - clocks : as described in the clock bindings
+ - clock-names : as described in the clock bindings
+ - fclk-enable : Bit mask to enable FCLKs statically at boot time.
+		 Bit [0..3] correspond to FCLK0..FCLK3. The corresponding
+		 FCLK will only be enabled if it is actually running at
+		 boot time.
+
+Clock inputs:
+The following strings are optional parameters to the 'clock-names' property in
+order to provide an optional (E)MIO clock source.
+ - swdt_ext_clk
+ - gem0_emio_clk
+ - gem1_emio_clk
+ - mio_clk_XX		# with XX = 00..53
+...
+
+Clock outputs:
+ 0:  armpll
+ 1:  ddrpll
+ 2:  iopll
+ 3:  cpu_6or4x
+ 4:  cpu_3or2x
+ 5:  cpu_2x
+ 6:  cpu_1x
+ 7:  ddr2x
+ 8:  ddr3x
+ 9:  dci
+ 10: lqspi
+ 11: smc
+ 12: pcap
+ 13: gem0
+ 14: gem1
+ 15: fclk0
+ 16: fclk1
+ 17: fclk2
+ 18: fclk3
+ 19: can0
+ 20: can1
+ 21: sdio0
+ 22: sdio1
+ 23: uart0
+ 24: uart1
+ 25: spi0
+ 26: spi1
+ 27: dma
+ 28: usb0_aper
+ 29: usb1_aper
+ 30: gem0_aper
+ 31: gem1_aper
+ 32: sdio0_aper
+ 33: sdio1_aper
+ 34: spi0_aper
+ 35: spi1_aper
+ 36: can0_aper
+ 37: can1_aper
+ 38: i2c0_aper
+ 39: i2c1_aper
+ 40: uart0_aper
+ 41: uart1_aper
+ 42: gpio_aper
+ 43: lqspi_aper
+ 44: smc_aper
+ 45: swdt
+ 46: dbg_trc
+ 47: dbg_apb
+
+Example:
+	clkc: clkc@100 {
+		#clock-cells = <1>;
+		compatible = "xlnx,ps7-clkc";
+		ps-clk-frequency = <33333333>;
+		reg = <0x100 0x100>;
+		clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
+				"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
+				"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
+				"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+				"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
+				"dma", "usb0_aper", "usb1_aper", "gem0_aper",
+				"gem1_aper", "sdio0_aper", "sdio1_aper",
+				"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
+				"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
+				"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
+				"dbg_trc", "dbg_apb";
+		# optional props
+		clocks = <&clkc 16>, <&clk_foo>;
+		clock-names = "gem1_emio_clk", "can_mio_clk_23";
+	};